K310@W200

[erlin24]

Por favor necesito ayuda al hacer el backup me sale esto "executing CS GDFS startup" y despues de varios minutos me sale "READY"

Y cuando quiero subir algun acousti o algo me sale "executing CS FS startup"

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35331601213260 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
can't open file "D:\celulares\software\Setool2Lite_v1.08\rest\R4HA 014_CXC1250719_GENERIC_ME"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properties.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:394 secs.

[smir]

Por favor necesito ayuda al hacer el backup me sale esto "executing CS GDFS startup" y despues de varios minutos me sale "READY"

Y cuando quiero subir algun acousti o algo me sale "executing CS FS startup"

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35331601213260 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
can't open file "D:\celulares\software\Setool2Lite_v1.08\rest\R4HA 014_CXC1250719_GENERIC_ME"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Can't get packet properties.
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:394 secs.

He ayi el problema. Amigo coloca el rest de tu firm en la carpeta rest del setool
Esto lo haces con un minisoft que debe de venir en tu setool que se llama RestMaker.

suerte