K700i

[SeVeN82]

hi lavondys,

i did what you said, but:

1. se tool lite doesn't connect to my phone (the phone isn't even found by windows hardware manager...)
2. the update service from se tells me to plugin the loading station...
i don't have one, just the cable (if it is the dc60 i can't tell, it's a non se product)...

the cable itself is detected as a prolific serial to usb connection...

when i plug in the cable to the phone (and pressing the "c" button), the phone switches on...
no identification by windows
nor by se tools lite...

it's frustrating....



greetings

[SeaMonkey]

hi lavondys,

i did what you said, but:

1. se tool lite doesn't connect to my phone (the phone isn't even found by windows hardware manager...)
2. the update service from se tells me to plugin the loading station...
i don't have one, just the cable (if it is the dc60 i can't tell, it's a non se product)...

the cable itself is detected as a prolific serial to usb connection...

when i plug in the cable to the phone (and pressing the "c" button), the phone switches on...
no identification by windows
nor by se tools lite...

it's frustrating....



greetings

Read first two section in this tutorial XS++ 2.x Guide - Top Sony Forums and when you get log from XS++ post it here

[SeVeN82]

hi seamonkey,

this is what xs++ is telling me....

12:22:43| XS++ v3.1 (Darwin) Ready !
12:22:43| Executed on Microsoft Windows XP
12:24:05|
12:24:05| Attempting to open the interface...
12:24:05|
12:24:05| TURN OFF PHONE!
12:24:05| Hold 'C' button on phone and connect phone NOW.
12:24:05| You have 30 seconds...
12:24:05|
12:24:35| Error: Cannot open phone communication port
12:24:37| Disconnected... Unplug the phone

i connect my k700i with a non-se cable (it is a prolific usb to serial or otherwise) and opens a com-port (COM6)...

greetings

[SeaMonkey]

hi seamonkey,

this is what xs++ is telling me....

12:22:43| XS++ v3.1 (Darwin) Ready !
12:22:43| Executed on Microsoft Windows XP
12:24:05|
12:24:05| Attempting to open the interface...
12:24:05|
12:24:05| TURN OFF PHONE!
12:24:05| Hold 'C' button on phone and connect phone NOW.
12:24:05| You have 30 seconds...
12:24:05|
12:24:35| Error: Cannot open phone communication port
12:24:37| Disconnected... Unplug the phone

i connect my k700i with a non-se cable (it is a prolific usb to serial or otherwise) and opens a com-port (COM6)...

greetings

Just connect phone with SE usb cable (I think k700 use DCU-60),and don't use any port

[SeVeN82]

hi seamonkey,

then i have to get a cable first (i just have this cable)...

i will post again when i got the right cable...


greetings


edit:

i ordered now a cable ( an original dcu-11 cable)...
hope this works...

greetings