Help needed

[_Adrian_]

When you connect the phone press the C key on phone and not the 2+5 keys. Then try to reflash the phone. Also you can try XS++ instead of SETool2 Lite.

it wont do nothing when im holding C
but i got it further than i did...
Started with holding 2+5 and then was using C through the rest of the process, but this is what happened next !!!

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3522080122XXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:3522080122XXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Users\acer\Documents\Cell phone Stuff\setool2lite\qamaker\K790_R6BC002_MAIN_GENERI C_EV_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
verify block error
last blk:45230000,00010000
Elapsed:642 secs.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:72 secs.
Abort all operations.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:53 secs.

as you can see tried to re-flash the phone with no success...
any other thoughts or ideas ??
phone is now dead and wont even flash