Hi,
I wonder if it is possible to remove the network lock for a W880 phone?
Info about the phone:
Flash CID: 52, COLOR: Red.
Is this even possible with the original USB cable for the phone?
/regards
Hi,
I wonder if it is possible to remove the network lock for a W880 phone?
Info about the phone:
Flash CID: 52, COLOR: Red.
Is this even possible with the original USB cable for the phone?
/regards
Yes you will need to use Remove Sim-Lock Patch Generator to create your unlock patch
and then you will need to use SEtool2Lite v1.11 to upload your patch to your phone.
**Use this tutorial for help ;)**
Hope this helps :D
Last edited by jamiegwill; 05-27-2008 at 10:48 AM. Reason: Added tutorial link
Thank you I am using XS++ instead. Btw I had CID 51
Now when I am trying to flash the phone I get the following error:
17:12:45| Hold 'C' button on phone and connect phone NOW.
17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed
What should I do?
Hi,
I use XS++ instead. I am getting errors when flashing the phone, what should I do?
17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed
Hi,
I use XS++ instead. I am getting errors when flashing the phone, what should I do?
17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed
I cannot login with zilveer anymore, I am zilveer.
SO strange, The webbrowser was freezing and I clicked on the button but still nothin happened.
try flashing it with setool lite 1.11...Make your battery full...By the way your flashing it with CID51 flash file...You should flash it with CID52 flash file
You must use: Downloads - R8BA024_RED52 - Top Sony Forums
W880_R8BA024_MAIN_GENERIC_AI_RED52
USE CID 52 FLASH FILE...BECOZ your phone is upgraded already in cid 52
There are currently 1 users browsing this thread. (0 members and 1 guests)