W880: remove network lock?

[zilveer]

Hi,
I wonder if it is possible to remove the network lock for a W880 phone?
Info about the phone:
Flash CID: 52, COLOR: Red.
Is this even possible with the original USB cable for the phone?
/regards

[jamiegwill]

Hi,
I wonder if it is possible to remove the network lock for a W880 phone?
Info about the phone:
Flash CID: 52, COLOR: Red.
Is this even possible with the original USB cable for the phone?
/regards

Yes you will need to use Remove Sim-Lock Patch Generator to create your unlock patch

and then you will need to use SEtool2Lite v1.11 to upload your patch to your phone.


**Use this tutorial for help ;)**

Hope this helps :D

[santiago]

Hi,
I use XS++ instead. I am getting errors when flashing the phone, what should I do?

17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed

[PinOutMe]

17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn[/COLOR]

check your flash file

[santiago]

Thank you I am using XS++ instead. Btw I had CID 51
Now when I am trying to flash the phone I get the following error:

17:12:45| Hold 'C' button on phone and connect phone NOW.
17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed


What should I do?

[santiago]

Hi,
I use XS++ instead. I am getting errors when flashing the phone, what should I do?

17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed

[santiago]

I cannot login with zilveer anymore, I am zilveer.
SO strange, The webbrowser was freezing and I clicked on the button but still nothin happened.

[senter]

I cannot login with zilveer anymore, I am zilveer.
SO strange, The webbrowser was freezing and I clicked on the button but still nothin happened.

You must use: Downloads - R8BA024_RED52 - Top Sony Forums

W880_R8BA024_MAIN_GENERIC_AI_RED52

[PinOutMe]

try flashing it with setool lite 1.11...Make your battery full...By the way your flashing it with CID51 flash file...You should flash it with CID52 flash file

[richard102]

USE CID 52 FLASH FILE...BECOZ your phone is upgraded already in cid 52