Post here any problem with flashing with Setool2 Lite

[geokilla]

are you sure your firmware is hong kong?
can place log with setool2lite?

The log from SeTool2lite:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Abort all operations.
Elapsed:7 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401523478 CERT:RED
LDR: DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Vernon\My Documents\Sony Ericsson W580\setool2liteV1.11\Bright Red Volume.vkp
VKP script loaded OK. Lines: 2376
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45740000
New block #0001 added: $45780000
New block #0002 added: $45A00000
Blocks selected OK. Reading blocks: 3
Blocks readed to memory OK. Checking contents...
Elapsed:154 secs.

Hope it helps.

[mohammad.t]

The log from SeTool2lite:
Hope it helps.

excuse me sir please click on identify in setool2lt and send log
i dont see info about your firmware in this log!

[geokilla]

excuse me sir please click on identify in setool2lt and send log
i dont see info about your firmware in this log!

:o My bad.

Here's the log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401523478 CERT:RED
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BA024 prgCXC1123477_HONG_KONG_LA
MAPP CXC version: R8BA024
Language Package:HONG_KONG
CDA article: CDA102568/104
CDA version: R8A
Default article: cxc1123364
Default version: R8BA024

Network LOCKED
Operator: 302-72

Elapsed:4 secs.

[mohammad.t]

:o My bad.

Here's the log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401523478 CERT:RED
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BA024 prgCXC1123477_HONG_KONG_LA
MAPP CXC version: R8BA024
Language Package:HONG_KONG
CDA article: CDA102568/104
CDA version: R8A
Default article: cxc1123364
Default version: R8BA024

Network LOCKED
Operator: 302-72

Elapsed:4 secs.

i do not found any patch for your firmware
if you having decided use patches you can flash main firmware with a other firmware(for ex generic)

[geokilla]

i do not found any patch for your firmware
if you having decided use patches you can flash main firmware with a other firmware(for ex generic)

Actually, there's a few patches for R8A on SE-NSE. I don't really need R6, but it'll be great if I can get the R6C Hong Kong firmware files since it's less buggy and there's more patches for it.