Post here any problem with flashing with Setool2 Lite

[paladinzluka]

SE Tool 2 cracked should do the job.

We speak about 2020 platform. Setool 2 craked doesn't support 2020

[gsmkiller]

my K800 phone is dead and having problem to flash with Setool2lite

The flash procedure cdan't start so what's wrong

BR GsmKiller :)

[radu]

Damn i ruined my k310 when i pressed read GDFS.
PLEASE HELP.
welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35434201292320 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EC001_CXC1250466_GENERIC_DO
Restore from:R4EC001_CXC1250466_GENERIC_DO
can't open file "C:\Documents and Settings\raducu\My Documents\setool2lite\rest\R4EC001_CXC1250466_GENE RIC_DO"
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
Abort all operations.
Can't get packet properties.
wrong response, break.
failed, that is fatal
Elapsed:104 secs.

[klatusharp]

Does some one has a tutorial showing how can we flash the cell (i got one w810i, is it SE or XE?!?!) how can I know about CID also?!?!

I know that is too much question but unfortunetly i'm a beginner in this world.

Many Thanks for the help!!

[radu]

dead phone thanks to setool2 lite, wasted time nobody helps on these forums :(

Nevermind lol Thanks God i reflashed main firmware. it looks like setools riunes k310i-s lol.

[radu]

what?please explain :( what phone do you have and what are you trying to do?

[radu]

and what do you want to do?

[radu]

hm the russians are very good@patching sonyericsson . Search forums like SonyEricsson NEWS - âñ¸ äëÿ íîâèíîê êîìïàíèè Sony Ericsson and Google you will sure find what you want. i wish i'd know russian lol

[nitroblu]

i have a problem with using setool2lite to patch. i have downloaded the .vkp patches, and have followed the instructions for patching found here:
SETool2 Lite - SE-NSE Forums

however, when I try to use this method, setool2lite successfully uploads the patch file to the program, and can't upload it to the phone. it will recognize for example the patch is 10 blocks, but will say there are no blocks available on my phone to apply the patch.

any help? I would provide screens if needed, just didn't want to risk bricking my phone if it bugs out on me for some reason

[matin-gsm]

@ radu
sorry for late reply .
as in your LOG shown you didn't have Rest file for your fone .
so ofcourse your fone will dead if you backuped from GDFS without restoral file .
so if you have firmwares just full flash (FLS + IMAGE) your fone and be sure your fone will work again .

@Klatusharp
for flash a cell fone just put flash files and press flash button .
and for know which CID is in base of your fone's security you have to get identify from your fone , i think this is available on setool lite2 free edition ( i think so ) .

good luck .
Matin-GSM.ir