k610i problem patch

[wikopl]

Right. I managed to apply:
A. using X++ 3.1 (I simply didn't know how to apply FS file with SETool2Lite1.11)

K610_R1KG001_MAIN_GENERIC_TH_RED52.mbn and
K610_R1KG001_FS_T_MOB_INT_A_RED52.fbn

B. next step using SETool2Lite1.11 I applied bypassing DB2020security

K610_R1KG001_MAIN_GENERIC_TH_RED52.mbn and
quick_access_K610_R1KG001.vkp (from qamaker.exe)

C. finally I applied using SETool2Lite1.11 with quick access option

Remove_SIM_lock_K610_R1KG001.vkp (generated with SIMLockPatchGen_v2.1)

All seemed like in the book. I had a failure at step B though, when writing 460 blocks (I made mistake plugging the telephone not the way it should be) but started all over from step A and then I went through all the procedures without problems.

Now, when I switch my mobile on, I get a choice:
Start phone
Normal
Flight mode

No matter if Normal or Flight mode, I get this message then and it hangs:
Configuration error. Please contact your network operator or service centre.
If I don't select any of those, I can get to Service Info (>*<<*<*) and all padlocks are open.

What's wrong? I have tried original SIM from 3 and from another network and no difference.

I have found for example Downloads > Custom Files > k610custpack
K610i_CDA102497_46_R24A_3_United_Kingdom
Do I need to apply it or anything similar? Or MAIN, FS files should be different at first?

Thanks

[hyperion17]

I have found for example Downloads > Custom Files > k610custpack
K610i_CDA102497_46_R24A_3_United_Kingdom
Do I need to apply it or anything similar? Or MAIN, FS files should be different at first?

Thanks

If you flashed K610_R1KG001_FS_T_MOB_INT_A_RED52.fbn, you must customize with K610i_CDA102497_13_R19A_T-Mobile_DE_Germany. Just put the ".zip" archive to "Misc Files" in Setool and hit "Flash".
I don't understand, though: what all this has to do with the thread Far Manager ?