W200i Unlocking

[selops]

Simox, I have a w200i DB2012 CID52 RGB001_MAIN_GENERIC_RED52.
I used your Remove SIM-lock patch generator v2.2 to generate the patch.
I created the REST file.
Then I ran Setool2lite v1.11 and tried to flash with the unlock patch using DCU-60 cable.

I got the following message which indicates failure to flash.
Can you tell me what does it mean ?

=========Setool2lite session log=========IDENTIFY
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W200i
Brand:Optus
MAPP CXC article: R4GB001 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4GB001
Language Package:EUROPE_2
CDA article: CDA102738/14
CDA version: R3A
Default article: cxc1250728
Default version: R4GB001

Network LOCKED
Operator: 505-02

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:14 secs.
===================FLASH with VKP file
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: D:\mobile\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W200_R4GB001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:15 secs.
=========end of log=========

[riders4sia]

Simox, I have a w200i DB2012 CID52 RGB001_MAIN_GENERIC_RED52.
I used your Remove SIM-lock patch generator v2.2 to generate the patch.
I created the REST file.
Then I ran Setool2lite v1.11 and tried to flash with the unlock patch using DCU-60 cable.

I got the following message which indicates failure to flash.
Can you tell me what does it mean ?

=========Setool2lite session log=========IDENTIFY
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W200i
Brand:Optus
MAPP CXC article: R4GB001 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4GB001
Language Package:EUROPE_2
CDA article: CDA102738/14
CDA version: R3A
Default article: cxc1250728
Default version: R4GB001

Network LOCKED
Operator: 505-02

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:14 secs.
===================FLASH with VKP file
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: D:\mobile\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W200_R4GB001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:15 secs.
=========end of log=========

i think you need to apply quick access first like in db2020 phones