W200i Unlocking

[mosty]

Hi, Can this phone be unlocked, I have managed to debrand it but I'm not sure about unlocking it???

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Will backup GDFS now.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:51
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:354269xxxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1001
Found:692 variables
Found:309 variables
GDFS read all done, GDFS_35426901118814.BIN written
Phone detached
Elapsed:41 secs.

Thank you for your help...

[philzfog]

w200 cant be unlocked for free

[simox]

Can this phone be unlocked, I have managed to debrand it but I'm not sure about unlocking it???

It can be unlocked with a new method called Any CID patching: Patching CID53 (DB2020)&DB2010,2012. The guide is missing for DB201x, but you can find guides over the internet.

Here is den_po's short guide for DB2010/2012:

common:
1) use mkrest to make rest for your fw
2) extract contents of {yourplatform}.zip and {yourphone}/{firmware}.zip to your phone
3) turn your phone on and run games/executor
4) reinsert battery

db201x:
5) start jdflasher, select right script (don't forget to edit cid num value in it), uncheck "rsa" box, connect, enter to bflash
6) flash rest
7) do whatever you want
continue from the step 3 further
bfs doesn't work

[SeaMonkey]

I'm not finished that guide because:
1. I don't have DB2010 phone - so I can't try that
2. Manny people who tried that - didn't succsed

[simox]

I haven't tried this method neither...

Manny people who tried that - didn't succsed

what is the problem? the executor?

[SeaMonkey]

No,problem is in script-phones relations(in one phone script work- exactly the same script in another 2 NO)

[mosty]

Hi guys, thanks for your unswers, this is the guide you were talking about;

Any/ALL CID Patching Tutorial/Guide DB2020

This tutorial is for Patching db2020 Sony Ericsson phones and all CIDs. So you can now patch your CID53 phone with this guide. You can also use this method to patch CID49, CID51 and CID52 also. Thus you can unlock your phone with unlock patch if you want to do so.
This tutorial is written for new and intermediate users. Advanced users may find this tutorial a bit lengthy, because of the details.
You can find out your phone platform, if its db2020 or not from the SE-LifeStyle Phone Database. Select db2020 in the left column and it will show all db2020. Or else select All in Platform and Click on phone in the Right column, it will show information about your phone platform and also possible CIDs. Its a pretty easy to use tool.
Downloads
Install USB Flash Drivers( You must install usb flash drivers, if not already installed.)
JD Flasher (Updated for AnyCID). (The main tool)
All CIDs Patching Files. AnyCID.ZIP
Video Tutorial, Download.
Read the tutorial, and don’t forget to watch the video to learn ! If you have any problems discuss them at our support forum !

Part 1 : Preparations and Basic Setup.
Extract the AnyCID.ZIP. In your phone folder, you should find a zip file which contains executor.b !
As an example you can find the following zip file in w580 directory R8BE001_CXC1123362_GENERIC_LA !
Here RBBE001 indicates the main firmware version for which the executor.b works. So you better make sure you have a main firmware for which executor.b is available.
Download the main firmware .mbn from the Internet. You can easily search in esnips, 4shared or *******.com for firmwares.
Download Jdflasher, Extract it.
In the directory Far\Plugins\jdflasher\rest you will find mkrest2.exe.
This is the Make Rest Tool. Its used to create the Rest file for your firmware. Rest is short for ReStore.
Copy your main firmware, MBN to Rest Folder and drag and drop the main firmware file (.mbn file) onto mkrest2.exe !
It will create the rest file for your firmware. Keep a note of this file, The Rest file for your main firmware. We need this file later.
Now in jdlfasher\2020_52 folder you will find qamaker.exe, drag and drop your main firmware onto qamaker.exe. You will get the Quick Access Patch for your phone.
We continue with our example phone, Enter AnyCID\w580. Extract the zip file R8BE001_CXC1123362_GENERIC_LA to get tpa\preset\custom\executor.b !
And in the db2020.zip you will find executor.jar and customize_upgrade.xml ! These files are also needed.
Also in the AnyCID folder you will find a file qa2020.xml copy it to jdlfasher\scripts\**here**; Over write the old qa2020.xml with new one from Any CID.
Part 2: Flashing, Copy Breaking files to File System.
We now have to copy the 3 files executor.b, executor.jar, customize_upgrade.xml to tpa\prest\custom in the phone’s file system. This is pretty easy with Jdflasher.
Shutdown phone.
Re-Insert Battery.
Start Far.exe
Press ALT+F1
Select your db2020 in Script option, Select port as DCU-60, And select Maximum Speed 921600.
Also Uncheck the RSA option, this can cause problems.
Now Jump Down Into A Large Rabbit Hole. I mean Click that option ;-).
Jdflasher will initialize and you will will get few options on the left side. Right side is your computer’s file system.
Now Double Click OFS. Jdflasher will start the file system loader and finally you should enter the phone file system.
Enter tpa and then preset and then finally custom folder.
You should now be in tpa\preset\custom\ folder in the phone file system.
Now copy all the the 3 files to this folder, executor.b, executor.jar, customize_upgrade.xml
Copying is easy, on the right side in Far Manger navigate to plugins\jdflasher\AnyCID and then drag and drop the individual files to the Left Side to the phone in tpa\prest\custom\
Before leaving make sure that you have all the 3 files in the phone file system, i.e On the LEFT hand side in tpa\prest\custom\.
Its now time to exit from file system. To Exit you need to go back to the root. You should on double click ” . . “ until you reach root, then click one more, you will get a message in RED. Its the option to shutdown file system loader, so click OK. Basically it says you should re-insert battery.
Disconnect phone and re-insert battery and start phone.
Part 3: Installing Quick Access !
Go to Entertainment and then Games. Run the executor in games. Your phone will turn off.
Now Re-insert Battery. Don’t start the phone.
Start Far Manager.
In The Script option select script as qa2020 ! And Enter the Rabbit hole once more !
Enter bflash this time.
Naviate to rest folder in jdflasher. Its time to flash the Rest file.
Click on your Rest File.
Press F5 ok keyboard and then click copy, then in 2nd screen click flash. (Flash as a BABE).
Now Navigate to 2020_52 folder, click on your quick access patch, so that its selected.
Hit F5, click copy, hit flash ! It should be flashed as a VKP.
JDflasher will now flash the Quick Access VKP and Install it !
Exit bflash through ” . . ” option.
Start phone, navigate to games, Delete executor.
Quick Access has now been installed into your phone. Patching the phone now becomes very easy.
Part 4: Patching !
You can now apply any number of patches you want.
Shutdown phone. Re-Insert Battery.
Select qa2020 as script.
Start Jdflasher, jump in rabbit hole.
Enter bflash. Navigate to patch.
Select the patch, press F5 and then click copy and then click flash. Flash as a VKP.
Apply any number of patches in the session.
Exit bflash.
Dis-connect phone, Re-Insert Battery and Start phone.
Repeat Part 4 whenever you want to apply a patch.
Notes–
1. To unlock phone apply the unlock patch. Unlock patch can be generated using SIMOX tool with your main firmware mbn file.
2. If you re-flash main firmware, all patches are erased.
3. You may want to read the Jdflasher tutorial for help on flashing and customization.
Note for w610 and w660 users.
w610 R6BC002 has a lot of patches, but for R6BC002 there is no executor.b files. So flash your phone with R8BA024 Main and keep the R6BC002 FS. Then after flashing the rest file in part 3, flash the R6BC002 Main and then Flash the Quick Access patch. This way your phone will have R6BC002 Main, you can then use all R6BC002 patches.
Similarly w660 users should flash R8BE001 firmware, use the executor.b and break the main, then in part 3 after flashing REST file of R8BE001, flash the R8BB001 Main firmware, then apply quick access patch. This way you will have R8BB001 firmware. And R8BB001 has lots of patches and elves.
I have provided the video tutorial, so am not adding pictures. That’s cool enough.

Good Luck...:confused:

[simox]

So, have you managed to apply the patches?

[simox]

No,problem is in script-phones relations(in one phone script work- exactly the same script in another 2 NO)

I had a little free time, and I made a little research about this problem: the good news is that w200 can be patch unlocked with "any CID" method.
You need:
1. jdflasher_test6.rar and jdflasher_test6_add1.rar. First unpack the jdflasher_test6.rar and then the jdflasher_test6_add1.rar(overwrite the existing files!!!)
Note: It is extremly important to use this version, otherwise it will NOT work!!!

2. Unpack the w200_xml.rar(it is in attachment) to {jdflasher_folder}\scripts\ folder.

3. Download the anyCID package: Patching CID53 (DB2020)&DB2010,2012

Patching W200 phones:
1) use mkrest to make rest for your fw
2) from anycid package extract contents of db2012.zip and w200/{firmware}.zip to your phone
3) turn your phone on and run games/executor
4) reinsert battery
5) start jdflasher, select the w200 script
6) flash rest
7) apply the patch(es)

The original idea/realisation: den_po and cchaos at se-nse. Big thanks to them :)

[DaWaN]

Hi simox,

Thanks for your usefull post :)
But how do I create a patch for my phone's firmware to unlock ?
And how do I apply that patch then ?