W200i Unlocking

[dilfred]

I must be honest, I am totally flummuxed by all this.
My phone is a w200 locked onto orange in the UK.
I've managed to get as far as running and getting this information, however am now 100% confused as to what to do next.
All I want to be able to do is put a different network card in there, I am not sure if I need to unlock/depatch/patch/debrand or what to be honest, but let's start with the main thing, how do I get the phone to work with all networks (or at least o2 instead...)

XS++ v3.2 Dev1 (Crystal) Ready !
Executed on Microsoft Windows XP
Attempting to open the interface...
TURN OFF PHONE!
Hold 'C' button on phone and connect phone NOW.
You have 30 seconds...
Baseband ID: 8040
Protocol Version: 3.1
NEW SECURITY PHONE DETECTED! SWITCHING...
Phone name detected!
Profiling SEMC phone...
Platform: DB2010
OTP CID: 51
EROM CID: 52
EROM Color: Red
IMEI: 35735401xxxxxx
Phone ID: W200
Region: ORANGE_GEN
CDA: CDA102738/71 R9A
Firmware Version: R4GB001
EROM: n/a
Ready for operation!

Sending db2010_db2012_cid52red_flash_r2b012.bin...
Shutting down...

That is all i've done so far, what do I do next, simple idiot steps ideally please :o)

Thank you all in advance for being gentle on my rather limited knowledge/understanding

[insane]

Hi,
I'm having some hassle unlocking a w200i can someone look at the log and tell me where i'm going wrong?

12:32:57| XS++ v3.1 (Darwin) Ready !
12:32:57| Executed on Microsoft Windows XP
12:33:04|
12:33:04| Attempting to open the interface...
12:33:04|
12:33:04| TURN OFF PHONE!
12:33:04| Hold 'C' button on phone and connect phone NOW.
12:33:04| You have 30 seconds...
12:33:04|
12:33:09| Baseband ID: 8040
12:33:09| Protocol Version: 3.1
12:33:09| NEW SECURITY PHONE DETECTED! SWITCHING...
12:33:09| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W200)
12:33:09| ...using GDFS name
12:33:09|
12:33:09| Profiling SEMC phone...
12:33:09| Platform: DB2010
12:33:09| OTP CID: 51
12:33:09| EROM CID: 53
12:33:09| EROM Color: Red
12:33:09| IMEI: 35575902xxxxxx
12:33:09| Phone ID: W200
12:33:09| Region: EUROPE_2
12:33:09| CDA: CDA102738/155 R1A
12:33:09| Firmware Version: R4JA011
12:33:09| EROM: n/a
12:33:09| Ready for operation!
12:33:34| Sorry, your phone is NOT SUPPORTED
12:33:34| Error: Cannot send flash loader
12:33:34| Error: Flashing failed
12:33:36| Disconnected... Unplug the phone

I would genuinely appreciate any help guys!

Insane.

[riders4sia]

Hi,
I'm having some hassle unlocking a w200i can someone look at the log and tell me where i'm going wrong?


I would genuinely appreciate any help guys!

Insane.

Read here : Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums
and here : Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums

[bambu_men]

jdflasher_test6.rar and jdflasher_test6_add1.rar link is dead. can someone upload it again. pliss..

[jocoolguy]

there is a simple method to unlock,leave other alternatives
get unlock code here and then unlock it http://www.onlinegsmunlock.com/

[kanaga]

you cannot unlock W200i for free of cost. But you can purchase the code from Online GSM Unlock.com- Unlock Your Phone and unlock it at very low cost

[sums]

When i put my .mbn file in mkrest.exe, it blinks a screen and disappears. What can i do

[pHysiX]

old topic, so sorry to revive but good news.

managed to UNLOCK CID 52 W200 =]