Completely overwhelmed newb...

Ok, first, I have an AT&T w580 that I want to debrand and modify so I can use flash themes(I wish it were as easily done as it is said). I am very very bad at this stuff. I have searched and found the guide for XS++ 3.1 but am still very lost.

Anyways, I have downloaded XS++ ver. 3.1, this flash driver --> 4shared.com - online file sharing and storage - download USBFlashDriver.zip , and the SEUS. Ok, first question. Is there anything else I need to download?

Now, second question I have for now. I connected to XS++ and got this:

21:44:56| Baseband ID: 9900
21:44:56| Protocol Version: 3.1
21:44:56| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
21:44:56| ...using GDFS name
21:44:56|
21:44:56| Profiling SEMC phone...
21:44:56| Platform: DB2020
21:44:56| OTP CID: 51
21:44:56| EROM CID: 52
21:44:56| EROM Color: Red
21:44:56| IMEI: 01127100xxxxxx
21:44:56| Phone ID: W580
21:44:56| Region: CINGULAR
21:44:56| CDA: CDA102774/102 R17A
21:44:56| Firmware Version: R7AC001
21:44:56| EROM: R3A022
21:44:56| Ready for operation!

Where do I go from here?

And sorry to all you uber-phone-pwning-doods that I am asking stuff that has been asked before. Like I said, I did the search, but I am still having a hard time understanding what to do.

Thanks In Advance!

I think I need to download this as well --> W580_R6BC002_FS_AMERICA_1_RED52 - Would that be correct? If so, is this site the only one to get it at(I havent posted 20 messages yet) and if that is not the correct file, which one should I get?

Where do I get the Main Firmware(Looked in the downloads section but didn't see it)? EDIT: Found this --> Downloads - Top Sony Forums - Is that correct?

And, Is this the custom pack I need? Downloads - w580custpack - HB1-06_Gen_CDA102568_15_R8A_GENERIC_AMERICA_1 - Top Sony Forums

well first of all why not flash to the latest R8 version of the w580 firmware?

look here for a generic Main and a FS and corresponds to the languages in your phone and use the same customization as your FS.

Second, just flashing to a generic FW wont unclock your phone, you need to patch it with the Sp-Lock patch.

here is the code for the sp-unlock patch for R8 w580:

Quote:

---

;W580 SW-R8BA024
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.0
+44140000
4F1DC4: 30B5041C00231A1C111C1C208CF4 F0B505213A2293F495FB0020F0BD

---

The reason I was looking at the ones I was looking at is because I saw on here that they would fix the bug where the lights change back to green every time I use the walkman function. Will the R8 firmware fix that as well? And as I said, I am new to this. What do I do with that code you posted?

Remove SIM-lock patch generator - How to apply the generated patches to DB2020 CID52 phones

This code is for unlocking your phone. This is in case if your phone will be locked after debranding.Only for this firmware version ( R8BA024 ).

Nice day

Quote:

---

Originally Posted by Stalix

well first of all why not flash to the latest R8 version of the w580 firmware?

look here for a generic Main and a FS and corresponds to the languages in your phone and use the same customization as your FS.

Second, just flashing to a generic FW wont unclock your phone, you need to patch it with the Sp-Lock patch.

here is the code for the sp-unlock patch for R8 w580:

---

R8BA024 firmware has the most annoying bug ever!! Light effects are screwed up

Ok, so is R8BA024 the one I want, or is R6BC002 the one I want? And is the Custom Pack I linked to in the original post the one I want(I noticed it says "R8A" in the title so I don't know)?

Well R8BA024 is the latest firmware, unfortunately it has that light effects bug. I'm not really sure what the difference is between R6BC002 and R8BA024. What fixes/changes did SE make between the two. If you want to fix for the light effects, go R6BC002. If you want the latest firmware, go R8BA024. I have R8BA024, but I'm thinking of going back to R6BC002 because the light thing annoys me so much. I've also heard, though not confirmed, that SE is working on a new firmware revision that will fix this.

For R8BA024 you need:
W580_R8BA024_FS_AMERICA_1_RED52
W580_R8BA024_MAIN_GENERIC_LA_RED52
HB1-06_Gen_CDA102568_15_R8A_GENERIC_AMERICA_1 <-- custom pack

For R6BC002 you need:
W580_R6BC002_FS_AMERICA_1_RED52
W580_R6BC002_MAIN_GENERIC_LA_RED52
HB1-06_Gen_CDA102568_15_R8A_GENERIC_AMERICA_1 <-- custom pack

I believe the custom pack is the same for both firmwares. Can someone confirm?

Awesome, thanks a ton. Now I just have to wait till I can download them and I think I will be set. :)

Quote:

---

Originally Posted by SaNdSuKkA

I believe the custom pack is the same for both firmwares. Can someone confirm?

---

Yes... custom packs are universal. You can use the same for both firmwares.

Ok, one last question(I hope, lol). When I am installing the custom pack, I use FSX and open "tpa", then "preset" then delete the "custom" section and upload the custom file I have, correct?

EDIT: The reason I am asking about FSX is because XS++ doesn't have a custom pack for the w580. Is that the right way to go?

And I'm also getting the "Coniguration error. Please contact your service provider or service center." message at startup. Will installing the custom pack fix that or did I mess up when flashing?

Here is a complete guide for xs++ 3.1.

XS++ 3.1 Guide-Flashing,Customizing,Recovering

Follow step by step.

Quote:

---

And I'm also getting the "Coniguration error. Please contact your service provider or service center." message at startup. Will installing the custom pack fix that or did I mess up when flashing?

---

Yes, you don`t have right custom pack installed.

Nice day

Thanks for the link to the guide, but as I said already, I have that already. My issue now is that XS++ 3.1 does not have my phone as an option and I don't know where to put these custom pack files I downloaded...

Then tried with this:

Flash your phone and How to apply or remove patch using SETool 2 Lite

All custom files are in download section.

Nice day

Alrighty, I finally got it working. Thanks to everyone that helped!

Quote:

---

Originally Posted by 300Shooter

Alrighty, I finally got it working. Thanks to everyone that helped!

---

Which software program did you end up using Shooter? Did you get XS++ to work?

yes ur right!

that configuration error will go away once u have installed the custom pack....

and also u can drag the custom files in to the upload box on XS++ 3.1

Quote:

---

Originally Posted by jasmin

Here is a complete guide for xs++ 3.1.

XS++ 3.1 Guide-Flashing,Customizing,Recovering

Follow step by step.



Yes, you don`t have right custom pack installed.

Nice day

---

One thing that I think might be confusing in this guide is how do you upload the custompack in XS++. Do you select the file like you do with FS and MAIN?

You drag them in!

Quote:

---

Originally Posted by SaNdSuKkA

Which software program did you end up using Shooter? Did you get XS++ to work?

---

At first I flashed with XS++ but couldnt figure out how to properly upload the custom pack so I reflashed with Far. It worked out great and now my phone is up and running. The only problem I have now is that my internet wont work. It keeps saying I have to "create a profile" and I have no clue what info to use.

EDIT: Nevermind again...Turns out that if you read owners manuals occasionally, it can sometimes help :eek:

Quote:

---

Nevermind again...Turns out that if you read owners manuals occasionally, it can sometimes help

---

That is true.
;)

Nice day

Quote:

---

Originally Posted by 300Shooter

At first I flashed with XS++ but couldnt figure out how to properly upload the custom pack so I reflashed with Far.

---

Sorry, meant to say I reflashed with SETool2, not Far, and the tutuorial here in the forums.