I get this error:
http://imagens.xoose.pt/images/ru2hasry4tvbg4iom5.jpg
Why does this happen?
How can i fix it?
It happens when trying to access oflash or ofs
I've got a SE k800i CID53 :(
I'm still a newbie @ this
Printable View
I get this error:
http://imagens.xoose.pt/images/ru2hasry4tvbg4iom5.jpg
Why does this happen?
How can i fix it?
It happens when trying to access oflash or ofs
I've got a SE k800i CID53 :(
I'm still a newbie @ this
here is a tutorial on how to use far+jdflasher
Flashing with jdflasher - Top Sony Forums
full flash your phone and try to do it again, by the way, what are you trying to do?
umm..., i guess you missed somthing, when applying patch, it will ask you to apply as vkp and remove patch or somthing, select the remove one and it will be removedQuote:
Originally Posted by bad_boy640
When trying to access oflash or ofl it gives me that error... what i was trying to do is the tutorial for converting k800i in k810i :(Quote:
Originally Posted by riders4sia
did you have the latest jdflasher plugin? may be it's becoz of the plugin
I do have this version of the plugin:
jdflasher_text5fix2_cid53
Edit:
Fixed it!!! :D :D :D :D :D :D
Don't update to the latest build of jdflasher
Use the one included in this pack:
Far Manager with JDFlasher plugin.rar
From the tutorial:
Flash K800 CID53 with K810 software CID53 (for begginers)
This fixed the problem and the error is now gone for good!
Btw can anyone help me with patching?
Could anyone explain a newbie this tutorial in simple steps? 'cause the one on 1st page is kinda confusing :S
Could anyone explain a newbie this tutorial in simple steps? 'cause the one on 1st page is kinda confusing :S
I did update my firmware from k800i cid53 to k810i cid 53... and whenever i try to execute executor with anycid for k810i (R8BF003_CXC1250811_GENERIC_SM)
I get a message that the operation failed.. what do i have to do???????????
Edit:
ISSUE FIXED!
fully flashed it and try again
I Have Done Every Step Of Patching But When I Was In Step No 10
My Jdflasher Is Show This Maassage{On Picx**...& My Phone Get Turn On Autometicaly..Quote:
Now you have opened bflash and bfs
10. Go to bflash and choose rest that we made at start
http://i42.tinypic.com/2d76a9g.jpg
Now What To Do??
Hi,
I am trying to patch a K810.
21:23:38| Baseband ID: 9900
21:23:38| Protocol Version: 3.1
21:23:38| Phone name detected!
21:23:38|
21:23:38| Profiling SEMC phone...
21:23:38| Platform: DB2020
21:23:38| OTP CID: 51
21:23:38| EROM CID: 53
21:23:38| EROM Color: Red
21:23:38| IMEI: 35612701xxxxxx
21:23:38| Phone ID: K810
21:23:38| Region: EUROPE_4
21:23:38| CDA: CDA102779/5 R4A
21:23:38| Firmware Version: R8BE001
21:23:38| EROM: R3A022
21:23:38| Ready for operation!
I have found almost all the files I need, except "executor.b", at least one for my firmware. Would someone be kind enough to tell me where I can find such a file? Couldent find one in the download section.
Or will I need to flash my phone with a firmware that matches the "executor.b" in anycid?
Thanks.
i have the same problem as Mobile Man, once i go to open the bflash folder, my K800's screen lights up on the "run flashed loader" line, then cuts to File Transfer mode, with Far+JD giving that error... any suggestions?
K800 - R8BF003 Generic - Red - CID53
EDIT:
Mobile Man (and others with same problem), i fixed it on my phone, i turned on my phone and relaunched executor, then reconnected to far+JD using qa2020, all went well from there and i've now a fully unlocked K800 :)
Hi.
I flashed my w660i firmware to R8BE001 and put the 3 files execute.b, execute.jar and custom upgrade.xml in custom folder but when I turn on the phone on and go to file explorer there is no executer in games?
i think that's the only wayQuote:
Originally Posted by MemorX
OK. I read tutorial, and something missed.
Did eny help for K770 ? Becaus SETOOL lite do not support ?
K770 lock. cid 53.
All proces flashing Main + Fs + Pach for corect versio. But when I have question remove patch "YES or NO" I click NO. Try also Yes BUT its same.
sorry for my english.
what patch are you trying to install?
can not download firmware any more,too
wait for......
I am trying to unlock a cid53 w880i. I have followed the tutorial but after I apply the rest file and the qa vkp my phone will not turn on. I reflash with main and fs and it turns on. What am I doing wrong ? I want to unlock my phone.
thanks in advance.
Patched w880i with CID 53 R8BA024 successfully, also applied simlock patch from patches download area, phone now unlocked. The instructions are a little confusing, so I've made some suggestions -
Step 1 - Do not use the latest version of jdflasher, for some reason it'll give you an error message (see post by zylor on earlier page). I used a slightly older version and was able to get the ofs loader working correctly.
Step 2 - make sure to copy over the qa2020 from anycid to the jdflasher scripts folder. The original one that comes with jdflasher won't work.
Take out the battery everytime you finish a step!
In order to use jdflasher, put the three components that are called for (executor, custom firmware, .jar file) into a folder in the jdflasher folder in far manager. That way when you want to transfer the three files into the phone, they'll be in the right area.
See [URL="http://www.topsony.com/forum/far-manager-f31/flash-k800-cid53-k810-software-cid53-begginers-t11605.html"] on how to use the far manager and jdflasher.
Put the three files above into the phone's directory (you'll see it on the left side of the far manager after connecting correctly), click on tpa, then preset, then custom and you'll come to a folder with alot of files. Just drag the three files over from your computer's directory on the right to the left side, a little window will come up asking if you want to copy, just click yes.
After disconnecting the phone you should see the executor file in the games section of the phone files (should not be in the memory card archives), click on the file and it should start up. The phone will turn off and promptly take out the battery before it starts up again.
At this point the original post is pretty clear. Remember with the w880 you need to press 2 instead of c to boot into the firmware.
Look for the unlock patch in the patches section, just drag the patch from your computer over to the phone using jdflasher after installing the firmware and quick access patch. It took me a couple of days of trying but eventually through trial and error and looking at many different tutorials, I finally have an unlocked phone!
Cheers to all, hope this helps someone!
Turns out I had to flash main (after applying the rest) and then apply the unlock patch. Works fine now.Quote:
Originally Posted by kurtas2006
what is it when i aplicat quick access and my phone don'¨t want to start up
tha't becoz you have applied with the wrong quick acces patch, i.e. quick access patch which doesn't match with your firmware version, tell us your firmware version and upload the file you are using
Hi i am trying to unlock a w880i that is locked to t mobile, at the point where you have to turn the phone on and run the executor file, from the file menu, i assume i will need a t-mobile simcard, as i cannot access file manager/games without a sim or with a different sim, please can anyone tell me if my assumption is correct. Thanks
By the way great site have been reading for 3 days solid.
You can't complete the process without a sim card, otherwise the phone will only allow you to go into demo mode.Quote:
Originally Posted by madthedad
Thanks maximenis, thats what I thought.
I haven't actually started the process yet, just done a lot of reading trying to get my head round the process.
Thanks again.
i have a w200 DB2010 cid53.. i can't make a vkp quick access file patch.what to do??
Ok, I have gone through the process (I think), the phone takes another sim, but after the phone goes through the process of obtaining settings via network, I get Inactive sim, although the phone is fully acessable the sim will not make or recieve calls, it is recognising the sim as O2 UK initialy when the phone is turned on.
Also in the tutorial it mentions removing the 3 files exacutor jar exacutor p and the upgrade file, when i go back in to find them where i put them (as instructed by tutorial) they are not visable, I say visable as the exacutor file was still visable in file menu/ games on the phone (where I was able to delete it) but they weren't visable through far/jd.
Any help would be appreciated.
*UPDATE*
I have followed the process again to the letter no errors, I have checked the service settings, simlock shows ALL padlocks 5 and unlocked.
When I insert my personal 02 sim I can ODDLY get on the internet and browse, yet it says sim in active and i cannot make or recieve calls or texts.
The phone is being done(or attempted) for my son who also has an 02 card, my wife has an 02 card they show and do the same.
Am I missing something guys??
PS 3 02 cards have been tried, intially the phones show 02 uk but then after several seconds they show inactive sim, 2 of these cards were taken out of other phones where there were no problems (full service).
Thanks........
I guess the process doesn't actually work for a cid 53 w880i
Hi! Thanks for your instructions on unlocking w880, i have followed all the steps but cant get past the EXECUTOR part, the phone keeps giving me a error when i try to run it.
This is my phone info
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3547690***** CERT:RED
FLASH CID:53 COLOR:RED
Model:W880i
Brand:Vodafone
MAPP CXC article: R8BA024 prgCXC1250641_VODAFONE_AI
MAPP CXC version: R8BA024
Language Package:VFE_LIVE_2
CDA article: CDA102719/122
CDA version: R6A
Default article: cxc1250651
Default version: R8BA024
Network LOCKED
Operator: 234-15
CDA102719/122 VFE_LIVE_2 Vodafone United Kingdom
And i am using these firmwares
W880_R8BA024_FS_VFE_LIVE_2_RED53.fbn
W880_R8BA024_MAIN_VODAFONE_AI_RED53.mbn
and the following CID W880i_CDA102719_122_R3A_Vodafone_United_Kingdom
is this correct_? i take the battery out in every operation like u say, i also use the old jarflash with updated anycid. I am using the w880 ".b" file provided in the w880 folder.
Please help me if you can! thanks in advance!
Regards,
Ed
Well EccTM, I have a W880i and I have the same problem, can you explain it a little bit better? Should I transfer the execute.b file to my phone or?Quote:
Originally Posted by EccTM
Please respond on this one, I'm quite frankly lost right now :(
or could anyone else respond on this one?
Hi!
I was trying to unlock the simlock of my W880i (Red CID53, DB2020, Firmware Version: R6BC002.)
I was following a guide, which wasn't clear enough, I guess.
As you probably know, there is no executor for my version in the anycid.rar, so I followed the instructions of the guide for these cases:
- get a main file, which HAS executor in the anycid.rar.
I picked R8BA24 main and fs files (and also the main and fs files for MY version R6BC002).
- make rest and qa patch files using R8BA24.mbn.
- now flash the phone with far using db2020 script, upload the R8BA24.mbn into the oflash folder as a babe image, up-up-up, disconnect, akku out-in.
- now flash again, now upload the executor files (.b, .jar, .xml) into the \tpa\preset\custom\ folder, and disconnect again, akku out, accepted sim in, akku in, turn on, go to games, start executor, whis supposed to shut down the phone. (it succeeded)
- now use FAR again, with the proper qa2020.xml, I connected the phone using this script. Enter "bflash".
[from this point, I was not sure which files has to be copied, I tell the story the way I did.]
- the guide said, upload here the rest file, but it hadn't mentioned, which version, so I uploaded the rest file (as a babe image) made of the mnb of MY firmware version. (maybe here I was slid:)
- upload the main file (as a babe image) for MY firmware version
- upload the qa patch vkp (as a vkp patch) (made by using MY firmware version)
- upload the unlocking vkp file
At this point I was shocked, wtf? Which unlocking vkp?
So I started to seek for other guides, and found one, which mentioned at this last step to upload the fs file, too (for MY frimware version), so I did it, however it didn't mention any unlocking vkp file. (I was more confused at this point.)
Than disconnect, akku out, (originally unaccepted) simcard in, akku in, turning on.
I was glad first, because the phone language was set back to mine, the phone was loading something, then it said, not supported SIM, insert blabla.
Yeah, I screwed something, so I decided to start all over.
As you see, it seemed that I can start again safely, because the status of my phone was exactly as it had been at the very first time.
I was planning to upload the other rest file, not the one made of MY main version.
I did as it was said:
- connect using db2020, upload the OTHER (R8BA24) main into the oflash folder, than disconnect, akku blabla. Done.
- Do not turn on, connect again instead, copy the executor files, disconnect, akku out, supported sim in, akku in, turn on, and OOOPS! I got this error:
"Configuration error. Please contact your network operator or service centre."
I freezed, what the hell?
So I started to redo things I'd done: uploaded the OTHER main again, then the main and the fs again, then MY main, my fs, but nothing helped, still throwing the same error.
Then I figured, whether I sould upload MY main using qa2020, so I connected successfully, but when I tried to enter "bflash" after some loading it halted:
http://lka.hu/home/petya/far-error.bmp
And right after this error the phone connects to the computer as an USB-storage.
Now I stopped trying anything, and asked for help.
Could anyone please help me out? :confused:
Thanks very much in advance!
Yours,
Boss
MOD:
I'v figured out the problem, browsing and reading a lot of topics... I needed to customize my phone, which isn't so trivial, when you read this alone, and nothing else. :D
Thx anyway!
Boss Hun
I have encountered the same problem. Please show me how to get this through - how do I customized my phone
I have a w880i DB2020 Red CID 53
thanks
confused...
what if there is no suitable executor for my phone?
(for example my phone is W810 R4BD, but there is only R3BD on the executor..Just an example)
what should i do??
well then, you should have to use R3BD to do it
oh i see,
so i have to reflash my phone.....
thanks....
sory... is there any way of unlocking w200 cid52 red R4GB001 ?
tried on these posts.., andnothing found. or i missed it.
i tried whit cid 53 db 2020 method, and no result.
please .., a hint maybe..,i would apreciate it !
goto Setool section, you'll find appropriate answer
Hi very nice guide. I have a problem. I have a k770i with a different firmware than the one in the anycid folder so i follow the method with the "red steps" . When i try to create the qa patch of MY firmware, it fails, (stopped responding), but if i try the one from anycid Folder it works. My firmware is K770_R8BA024_MAIN_VODAFONE_VI_RED53 Any ideas? thanks
help i cant create any rest files. when I try to generate I get some weird filenames like pL@¢
can someone tell is there way to patch se w200i cid53
ive got this one
K810i RED 53 R8BA024
log from XS++
04:01:37| Baseband ID: 9900
04:01:37| Protocol Version: 3.1
04:01:37| Phone name detected!
04:01:37|
04:01:37| Profiling SEMC phone...
04:01:37| Platform: DB2020
04:01:37| OTP CID: 51
04:01:37| EROM CID: 53
04:01:37| EROM Color: Red
04:01:37| IMEI: 35799401xxxxxx
04:01:37| Phone ID: K810
04:01:37| Region: CENT_EUROPE
04:01:37| CDA: CDA102568/2 R8A
04:01:37| Firmware Version: R8BA024
04:01:37| EROM: R3A022
04:01:37| Ready for operation!
is there solution to unlock that phone ?
SimlockPatchGenerator doesent work with CID 53
need .vkp for my phone, and solition how to apply that patch (in tutorial there is no solution how to apply unlock patch)
see the first page of this threadQuote:
Originally Posted by krzysztof
ive seen it and ive try it... but my phone have simlock provider and when i turn on phone after point 7 (uploading executor files) i cant go to File Manager
without SIM can see "Insert SIM card, or to vie a demo..."
with SIM card other provider can see "Insert correct SIM card"
i dont have SIM that provider who put a simlock)
so how can i go to File Manager without SIM ? or with SIM of other provider ???
there is no solution for me...
well then, you have to do it with D-Ultimate Unlocker