Patching CID53 (DB2020) and any CID (DB2010,DB2012)

[riders4sia]

Hi,

I am trying to patch a K810.

21:23:38| Baseband ID: 9900
21:23:38| Protocol Version: 3.1
21:23:38| Phone name detected!
21:23:38|
21:23:38| Profiling SEMC phone...
21:23:38| Platform: DB2020
21:23:38| OTP CID: 51
21:23:38| EROM CID: 53
21:23:38| EROM Color: Red
21:23:38| IMEI: 35612701xxxxxx
21:23:38| Phone ID: K810
21:23:38| Region: EUROPE_4
21:23:38| CDA: CDA102779/5 R4A
21:23:38| Firmware Version: R8BE001
21:23:38| EROM: R3A022
21:23:38| Ready for operation!

I have found almost all the files I need, except "executor.b", at least one for my firmware. Would someone be kind enough to tell me where I can find such a file? Couldent find one in the download section.

Or will I need to flash my phone with a firmware that matches the "executor.b" in anycid?

Thanks.

i think that's the only way

[Mikki1993]

OK. I read tutorial, and something missed.

Did eny help for K770 ? Becaus SETOOL lite do not support ?

K770 lock. cid 53.

All proces flashing Main + Fs + Pach for corect versio. But when I have question remove patch "YES or NO" I click NO. Try also Yes BUT its same.


sorry for my english.

[riders4sia]

what patch are you trying to install?

[allenke]

can not download firmware any more,too
wait for......

[kurtas2006]

I am trying to unlock a cid53 w880i. I have followed the tutorial but after I apply the rest file and the qa vkp my phone will not turn on. I reflash with main and fs and it turns on. What am I doing wrong ? I want to unlock my phone.

thanks in advance.

[maximenis]

Patched w880i with CID 53 R8BA024 successfully, also applied simlock patch from patches download area, phone now unlocked. The instructions are a little confusing, so I've made some suggestions -

Step 1 - Do not use the latest version of jdflasher, for some reason it'll give you an error message (see post by zylor on earlier page). I used a slightly older version and was able to get the ofs loader working correctly.

Step 2 - make sure to copy over the qa2020 from anycid to the jdflasher scripts folder. The original one that comes with jdflasher won't work.

Take out the battery everytime you finish a step!

In order to use jdflasher, put the three components that are called for (executor, custom firmware, .jar file) into a folder in the jdflasher folder in far manager. That way when you want to transfer the three files into the phone, they'll be in the right area.

See [URL="http://www.topsony.com/forum/far-manager-f31/flash-k800-cid53-k810-software-cid53-begginers-t11605.html"] on how to use the far manager and jdflasher.

Put the three files above into the phone's directory (you'll see it on the left side of the far manager after connecting correctly), click on tpa, then preset, then custom and you'll come to a folder with alot of files. Just drag the three files over from your computer's directory on the right to the left side, a little window will come up asking if you want to copy, just click yes.

After disconnecting the phone you should see the executor file in the games section of the phone files (should not be in the memory card archives), click on the file and it should start up. The phone will turn off and promptly take out the battery before it starts up again.

At this point the original post is pretty clear. Remember with the w880 you need to press 2 instead of c to boot into the firmware.

Look for the unlock patch in the patches section, just drag the patch from your computer over to the phone using jdflasher after installing the firmware and quick access patch. It took me a couple of days of trying but eventually through trial and error and looking at many different tutorials, I finally have an unlocked phone!

Cheers to all, hope this helps someone!

[kurtas2006]

I am trying to unlock a cid53 w880i. I have followed the tutorial but after I apply the rest file and the qa vkp my phone will not turn on. I reflash with main and fs and it turns on. What am I doing wrong ? I want to unlock my phone.

thanks in advance.

Turns out I had to flash main (after applying the rest) and then apply the unlock patch. Works fine now.

[juma007]

what is it when i aplicat quick access and my phone don'¨t want to start up

[riders4sia]

tha't becoz you have applied with the wrong quick acces patch, i.e. quick access patch which doesn't match with your firmware version, tell us your firmware version and upload the file you are using

[madthedad]

Hi i am trying to unlock a w880i that is locked to t mobile, at the point where you have to turn the phone on and run the executor file, from the file menu, i assume i will need a t-mobile simcard, as i cannot access file manager/games without a sim or with a different sim, please can anyone tell me if my assumption is correct. Thanks

By the way great site have been reading for 3 days solid.