K700i

hi there,

i hve some problems with my k700i...

it is locked for poland sim cards

so i can't get informations about the installed firmware and things like that ('cause none of my sim cards are working on this one)...

how can i get the informations without the sim inserted?

hope you can help me

thanks in advance...

greetings

hook up to se tools lite without sim, install usb flash drivers. Turn phone off, hold c and insert dc60 usb cable. Got to identify.

Post the log back here

Regards

Lavondys

hi lavondys,

i did what you said, but:

1. se tool lite doesn't connect to my phone (the phone isn't even found by windows hardware manager...)
2. the update service from se tells me to plugin the loading station...
i don't have one, just the cable (if it is the dc60 i can't tell, it's a non se product)...

the cable itself is detected as a prolific serial to usb connection...

when i plug in the cable to the phone (and pressing the "c" button), the phone switches on...
no identification by windows
nor by se tools lite...

it's frustrating....



greetings

Quote:

---

Originally Posted by SeVeN82

hi lavondys,

i did what you said, but:

1. se tool lite doesn't connect to my phone (the phone isn't even found by windows hardware manager...)
2. the update service from se tells me to plugin the loading station...
i don't have one, just the cable (if it is the dc60 i can't tell, it's a non se product)...

the cable itself is detected as a prolific serial to usb connection...

when i plug in the cable to the phone (and pressing the "c" button), the phone switches on...
no identification by windows
nor by se tools lite...

it's frustrating....



greetings

---

Read first two section in this tutorial XS++ 2.x Guide - Top Sony Forums and when you get log from XS++ post it here

hi seamonkey,

this is what xs++ is telling me....

12:22:43| XS++ v3.1 (Darwin) Ready !
12:22:43| Executed on Microsoft Windows XP
12:24:05|
12:24:05| Attempting to open the interface...
12:24:05|
12:24:05| TURN OFF PHONE!
12:24:05| Hold 'C' button on phone and connect phone NOW.
12:24:05| You have 30 seconds...
12:24:05|
12:24:35| Error: Cannot open phone communication port
12:24:37| Disconnected... Unplug the phone

i connect my k700i with a non-se cable (it is a prolific usb to serial or otherwise) and opens a com-port (COM6)...

greetings

Quote:

---

Originally Posted by SeVeN82

hi seamonkey,

this is what xs++ is telling me....

12:22:43| XS++ v3.1 (Darwin) Ready !
12:22:43| Executed on Microsoft Windows XP
12:24:05|
12:24:05| Attempting to open the interface...
12:24:05|
12:24:05| TURN OFF PHONE!
12:24:05| Hold 'C' button on phone and connect phone NOW.
12:24:05| You have 30 seconds...
12:24:05|
12:24:35| Error: Cannot open phone communication port
12:24:37| Disconnected... Unplug the phone

i connect my k700i with a non-se cable (it is a prolific usb to serial or otherwise) and opens a com-port (COM6)...

greetings

---

Just connect phone with SE usb cable (I think k700 use DCU-60),and don't use any port

hi seamonkey,

then i have to get a cable first (i just have this cable)...

i will post again when i got the right cable...


greetings


edit:

i ordered now a cable ( an original dcu-11 cable)...
hope this works...

greetings

try taking out the battery then put it back in and connect to XS++ again.

hi harper1988,

i did so several times...

i think it is the non-se datacable which doesn't connect the phone with my pc...

so i wait for the original one and try it with this...


greetings

That happened to me also. The cannot open phone communication port. But re-inserting the battery did the trick for me. Hope all goes well with your new cable.