este es el problema que da mi w850i al FINALIZAR:

Phone-XS GUI Build V2.01 Beta Ready!
System Diagnostics check: OK!
Attempting to execute COMPORT interface...
PORT STATUS: ACTIVE
***** Wait for 0x5a
Got 0x00
***** ?
DBID : 9900 (db2020)
proto : 3.1
pad : ffffffff
***** ?
***** ICO0 Read OTP
Phone-XS GUI Build V2.01 Beta Ready!
System Diagnostics check: OK!
Attempting to execute COMPORT interface...
PORT STATUS: ACTIVE
***** Wait for 0x5a
Got 0x00
***** ?
DBID : 9900 (db2020)
proto : 3.1
pad : ffffffff
***** ?
***** ICO0 Read OTP
Phone-XS GUI Build V2.01 Beta Ready!
System Diagnostics check: OK!
Hold 'C' and connect cable to phone. You have 30seconds...
***** Wait for 0x5a
***** ?
DBID : 9900 (db2020)
proto : 3.1
pad : ffffffff
***** ?
***** ICO0 Read OTP
Raw answer is: 631300013100013335323430313031323332353739
Closed: 1
CID : 49
PAF : 1
IMEI : 35240101xxxxxx (unknown model)
***** IC30 Read EROM color
Raw answer is: 630404000000
Color : 0 (
red)
***** IC40 Read EROM CID
Raw answer is: 630431000000
CID : 49
***** PRODUCTION_ID_LOADER
sending loaders\db2010_cid00_prodid_p3h.bin
QH00 Header
Wait for EsB
Wait for EhM
Failed
Apparently there is a file missing
sending loaders\db2020_cid01_cert_p3g.bin
QH00 Header
Wait for EsB
Wait for EhM
QA00 Prologue 7524 bytes
Wait for EaTEbS
QD00 Payload 52566 bytes
Wait for EdQ
060712 1258 ALU4_CXC1329130_DB2020_SEMC_CERTLOADER_P3G
This is a CERT loader
***** Read flash vendor & id (cmd 0D)
Binary answer is: 0a (897E)
No Main Flash Selected!
FS Image Not Selected!
***** PRODUCTION_ID_LOADER
binary sending loaders\db2010_cid00_prodid_p3h.bin
Header
Failed sending header: 0x10
Apparently there is a file missing
***** Authentication challenges are saved to authresponses_6.bin
***** CS_LOADER
binary sending loaders\db2020_cid49red_cs_r3a003.bin
Header
Binary acknowledge failed with: 89
Failed sending datachunk
Binary answer: got 0x68
Binary answer: got 0x02
Binary answer: got 0x00
Binary answer: got 0x00
Binary answer: got 0x70
Binary answer: got 0x9a


que puedo hacer??

he probado con 5 usbs diferentes, le he puesto el driver que puso buzzzer, he cargado la bateria al 100% y nada, siempre me sale esto y hay se queda...

ayuda Paulo...