tengo u w580 lo libero por patrche pero al poner el chip de movistar no lo lee

[chicharrin]

tengo un w580 ya realice el proceso del parcheo con setool lo termina pero al poner el chip de movistar no lo lee y pongo el de telcel y funciona a que se debe que no lo libere la setool

aqui posteo el log


v0.914021/UNI
CARD SERIAL: 000
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:TELCEL GSM
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package:AMERICA_2
CDA article: CDA102774/132
CDA version: R1A
Default article: cxc1123364
Default version: R6BC002

Network LOCKED
Operator: 334-02

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:13 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI: CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

bypassing security...
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
DB2020_PRELOADER_FOR_SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\JIMY\Escritorio\SE Tool 3\w580 cid 52\R6BC002_1123362_GENERIC_LA.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
full sig complete.
USERCODE RESET TO "0000"
Searching...
Firmware lock check determined.
Elapsed:578 secs.