XS++ 3.1 Guide-Flashing, Customizing, Recovering

[Atlus]

I some problem, I tried to flash a W810i (white) but I receive the bellow error:

19:32:43| Binary acknowledge failed with: 15
19:32:43| Command: Error 0x15
19:32:43| Failed sending flashblock 1. Returnvalue 0xFFFF250B

here the full output.

19:32:19| XS++ v3.1 (Darwin) Ready !
19:32:19| Executed on Microsoft Windows Vista
19:32:23|
19:32:23| Attempting to open the interface...
19:32:23|
19:32:23| TURN OFF PHONE!
19:32:23| Hold 'C' button on phone and connect phone NOW.
19:32:23| You have 30 seconds...
19:32:23|
19:32:26| Baseband ID: 8040
19:32:26| Protocol Version: 3.1
19:32:26| NEW SECURITY PHONE DETECTED! SWITCHING...
19:32:26| Phone name detected!
19:32:26|
19:32:26| Profiling SEMC phone...
19:32:26| Platform: DB2010
19:32:26| OTP CID: 50
19:32:26| EROM CID: 50
19:32:26| EROM Color: Red
19:32:26| IMEI: 35657301xxxxxx
19:32:26| Phone ID: W810
19:32:26| Region: AMERICA_2
19:32:26| CDA: CDA102295/7 R2A
19:32:26| Firmware Version: R4DB005
19:32:26| EROM: n/a
19:32:26| Ready for operation!
19:32:42|
19:32:42| Sending db2010_db2012_cid50red_flash_r1a002.bin...
19:32:42| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
19:32:42| This is a FLASH loader
19:32:42| Now flashing firmware main...
19:32:43| Flashing e:\programas\celular flashers\se flash\w810_r4ek001_main_generic_hn_red50.mbn
19:32:43| Header type: BABE
19:32:43| 344 flashblocks
19:32:43| Binary acknowledge failed with: 15
19:32:43| Command: Error 0x15
19:32:43| Failed sending flashblock 1. Returnvalue 0xFFFF250B
19:32:43| Finishing flash

[SeaMonkey]

Use small program "babeck" and check your MAIN and if is everything OK try with Setool2lite
(and I hope you do backup GDFS of your phone )

[Manindra]

Hey guys i use sony ericsson w660i phone, what is abt all this XSS+ and flash thing?I thought w660i doesn't have flash.plz help me i want to have a flash too :(

[Atlus]

Use small program "babeck" and check your MAIN and if is everything OK try with Setool2lite
(and I hope you do backup GDFS of your phone )

I'm new on SE flash, as far as I investigate, "babeck" checks the MAIN flash file to ensure no errors.

I have used XS++ (3.1) on 4 w810i (black color "CID49") without problems.

The phone I actually trying to flash is a w810i (white color "CID50"). Its there any differences between this two?

Do you recommend Setool2lite over XS++ :confused:

Thanks!

[W350a]

hey guys, just recently purchased SE W350a :)
wanted to tamper with it and well as unbrand it so i can use music files as ringtones...
so i downloaded the update service from the Sony web and also XS++

Upon opening XS++ and following the procedure this is what it said:
16:34:48| XS++ v3.1 (Darwin) Ready !

16:34:48| Executed on Microsoft Windows XP

16:34:54|

16:34:54| Attempting to open the interface...

16:34:54|

16:34:54| TURN OFF PHONE!

16:34:54| Hold 'C' button on phone and connect phone NOW.

16:34:54| You have 30 seconds...

16:34:54|

16:35:24| Error: Cannot open phone communication port

16:35:26| Disconnected... Unplug the phone

16:35:30| Shutting down...

I've tried connecting it as the tutorial states and the outcome is always the one above.. any sugeestions?

[brisky]

Hi, anyone knows why I get the Driver SEMC Driver fail?
How can I uninstall it?

Got a K610i and I used the bundled USB Cable.

Best regards.

[SeaMonkey]

Hi, anyone knows why I get the Driver SEMC Driver fail?
How can I uninstall it?

Got a K610i and I used the bundled USB Cable.

Best regards.

Use this tutorial and install flash drivers USB Flash Driver Installation - Guide - Top Sony Forums


@W350a Did you install flash drivers ,if you do try to reinstall

[yasaspra]

i did this a few months ago. to a bit different way. but nice. keep on. :)

[SeaMonkey]

wot is the best firmware for k8ooi thanx

But what CID - 52 or 53 and what region (language pack)

[exhi]

20:04:29| 291 flashblocks
20:04:29| Binary acknowledge failed with: 15
20:04:29| Failed

is that bad?