Help unlock w660i

[nisen]

setool2 only loading green twenty four seven. XS++ is very stable culd i use that program.

[nisen]

Yes I know. You have to use the patch file that you created with simlockpatchgen. The phone will not be unocked before this patch is applied. Use Setool2 lite to flash the patch on to the phone.

It is all described in my tutorial if you downloaded my file.

I got the simlockpatchgen what have i to do next drag a fireware file?

[oleq83]

When the green bar is showing, thats when you connect the phone (while holding C button). Do not connect the phone before after you have pressed the write script button, and the green loading bars apear.

[oleq83]

I got the simlockpatchgen what have i to do next drag a fireware file?

Yes.

Open the patchgen, add the firmware file, and press apply patch.

[oleq83]

Next step.

Open setool.

Now add the patch file that you just created where it says "misc", and press "Write SCRIPT". Now you connect the phone while holding C button.

Your phone should now be unlocked

[nisen]

so i dont have to press identfy

[oleq83]

so i dont have to press identfy

No. You don't

[nisen]

am done but still unlocked why?

[nisen]

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Admin\Desktop\SIMLockPatchGen\vkp\Remove_ SIM_lock_W660_R8BB001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:78 secs.

[oleq83]

am done but still unlocked why?

Well than I don't know. I suggest that you follow the instructions in my tutorial all over again Step By Step, and post your Xs++ log if this doesn't work.