SIMLockPatchGen Error!!

[simox]

What version of generator you used? If you used the v2.1 then it is a bug, and I will correct it...

[cesar67]

What version of generator you used? If you used the v2.1 then it is a bug, and I will correct it...

Seems like i have bricked the phone already :D

It was V2.1 i used.

I get "set_gdfs_props failed, exiting:"

It wont turn on, Tried using the backup .bin file but it does'nt do anything.

setool2lt does recognise the phone but, This is what i get:

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101336984 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:3 secs.

If you want any info to try and repair any bugs, Just let me know what.

EDIT:

I tried to flash the MAIN again and get this:

04:50:54| XS++ v3.1 (Darwin) Ready !
04:50:54| Executed on Microsoft Windows XP
04:51:04| 
04:51:04| Attempting to open the interface...
04:51:04| 
04:51:04| TURN OFF PHONE!
04:51:04| Hold 'C' button on phone and connect phone NOW.
04:51:04| You have 30 seconds...
04:51:04| 
04:51:09| Baseband ID: 9900
04:51:09| Protocol Version: 3.1
04:51:09| Phone name detected!
04:51:09| 
04:51:09| Profiling SEMC phone...
04:51:09| Platform: DB2020
04:51:09| OTP CID: 49
04:51:09| EROM CID: 52
04:51:09| EROM Color: Red
04:51:09| IMEI: 35240101xxxxxx
04:51:09| Phone ID: W850
04:51:09| Region: HUTCH_1
04:51:09| CDA: CDA102677/2   R5A
04:51:09| Firmware Version: R1ED001
04:51:09| EROM: R3A016
04:51:09| Ready for operation!
04:51:29| 
04:51:29| Sending db2020_cid01_prodid_p3j.bin...
04:51:29| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
04:51:29| This is a PRODUCTION_ID loader
04:51:29| 
04:51:29| Sending db2020_mem_patcher_cid52_r2a006.bin...
04:51:30| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
04:51:30| This is a MEM_PATCHER loader
04:51:30| 
04:51:30| Sending db2020_cid52red_flash_r2a005.bin...
04:51:30| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
04:51:30| This is a FLASH loader
04:51:30| Now flashing firmware main...
04:51:30| Flashing e:\documents and settings\administrator\desktop\w850_r1ed001_main_generic_cy_red52.mbn
04:51:30| Header type: BABE
04:51:30| 455 flashblocks
04:52:46| Binary acknowledge failed with: 15
04:52:46| Failed

When i try to backup the GDFS i done before all flashing operations (I did update the CID51 to CID52 before backing up the GDFS) this is what i get:

04:56:45| XS++ v3.1 (Darwin) Ready !
04:56:45| Executed on Microsoft Windows XP
04:56:49| 
04:56:49| Attempting to open the interface...
04:56:49| 
04:56:49| TURN OFF PHONE!
04:56:49| Hold 'C' button on phone and connect phone NOW.
04:56:49| You have 30 seconds...
04:56:49| 
04:56:57| Baseband ID: 9900
04:56:57| Protocol Version: 3.1
04:56:57| Phone name detected!
04:56:57| 
04:56:57| Profiling SEMC phone...
04:56:57| Platform: DB2020
04:56:57| OTP CID: 49
04:56:57| EROM CID: 52
04:56:57| EROM Color: Red
04:56:57| IMEI: 35240101xxxxxx
04:56:57| Phone ID: W850
04:56:57| Region: HUTCH_1
04:56:57| CDA: CDA102677/2   R5A
04:56:57| Firmware Version: R1ED001
04:56:57| EROM: R3A016
04:56:57| Ready for operation!
04:57:46| 
04:57:46| Sending db2020_cid01_prodid_p3j.bin...
04:57:46| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
04:57:46| This is a PRODUCTION_ID loader
04:57:46| 
04:57:46| Sending db2020_mem_patcher_cid52_r2a006.bin...
04:57:47| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
04:57:47| This is a MEM_PATCHER loader
04:57:47| 
04:57:47| Sending db2020_red52_cs_r3a009.bin...
04:57:48| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
04:57:48| This is a CHIPSELECT loader
04:57:48| Activating loader...
04:57:48| Activating GDFS...

Is it finished ? It stays like that for ages!!

Is it repairable ?