need v600 testpoint solution

[ts013]

Now thats really strange...

Anyway, if you got something like that:

PHONE IS INVISIBLE (00000000)
NO VALID FLASH CID DETECTED (00)

on SE Tool it's most likely that it's a problem with the hardware.

[nissenisse]

Now thats really strange...

Anyway, if you got something like that:

PHONE IS INVISIBLE (00000000)
NO VALID FLASH CID DETECTED (00)

on SE Tool it's most likely that it's a problem with the hardware.

this is what i get when trying to flash erom with setool but it works to flash main and fs with xs++ but not in setool

Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Cowardly refusing to load empty loader.
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:1 secs.

[berthstein]

During TP, with semc tool -FLASH CID DETECTED- should be 29
I attach the tp I used for k608i (should be the same).

[nissenisse]

During TP, with semc tool -FLASH CID DETECTED- should be 29
I attach the tp I used for k608i (should be the same).

i will test this tomorow