Remove SIM-lock patch generator

[yurais]

So, is it obbligatory to FLASH Main to th phon ? If I create teh patch from the same FW version the phone is running cant I just apply the patch ?

And can someone please tell me in few words how to upgrade CID 50 to CID52 without for examplel giving some credits to seking server?

And... after I upgrade CID, will the patching stuff work? with OTP CID50 andn EROM CID 52?

Simoxx, is there any way to read MAIN from the phone using setool lt and then Generate the patch from that created file ? is this possible ?

otherwise one has to download every possible firmware from the inteernet and this is not an easy task, after you have released this latest version, nobody wants to continue sharing their patches of teh firmwares they already have :((

[Shitblast]

Flashed my 3-locked w850i with firmware and fast-access script with SEtool 2.11 according to seunlock's guide, then wrote the simox-generated script to unlock it to it by "quick access." This rid it of the 3-screens and gained me access to all phone-functions except making calls. It displays "Inactive SIM" and won't let me pick my network. Any ideas?

SeTool output:

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Administrator\Desktop\Remove_SIM_lock_W85 0_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:14 secs.

Read Flash:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:5 secs.

[simox]

So, is it obbligatory to FLASH Main to th phon ? If I create teh patch from the same FW version the phone is running cant I just apply the patch ?

And can someone please tell me in few words how to upgrade CID 50 to CID52 without for examplel giving some credits to seking server?

And... after I upgrade CID, will the patching stuff work? with OTP CID50 andn EROM CID 52?

Simoxx, is there any way to read MAIN from the phone using setool lt and then Generate the patch from that created file ? is this possible ?

otherwise one has to download every possible firmware from the inteernet and this is not an easy task, after you have released this latest version, nobody wants to continue sharing their patches of teh firmwares they already have :((

I suggest you to read the following tutorial before you try to do anything How to apply patches with SETool2 Lite V1.11. And don't forget to backup your GDFS(it is very important to have a backup, otherwise you can brick your phone forever.)
You can upgrade the CID with XS++ v3.x versions. When you connect the phone to XS++ it will ask you if you want to upgrade the CID or not. Yes, after your EROM CID will be 52 you can apply the patch...

Shitblast: The generated patch is good, I know for sure because that patch was tested on sen-se forum under v2.1 development. First reflash your MAIN firmware, then read this thread How to apply patches with SETool2 Lite V1.11, and follow the instruntions. Is should work. If not try jdflasher. Just read above a few posts and you will find the link for jdflasher...

xulos: I'm working on your problem...

[yurais]

Simox, thanks for the link, anas sorry to be late, but I did not receive notify by email for replies of the thread.

that tutorial doesnt replies all of my questions.

please read my quoted post again and try to reply ifd possible, I'm not that newbie, so, dont reply as if I was one ;), just that there are doubts :)

I suggest you to read the following tutorial before you try to do anything How to apply patches with SETool2 Lite V1.11. And don't forget to backup your GDFS(it is very important to have a backup, otherwise you can brick your phone forever.)
You can upgrade the CID with XS++ v3.x versions. When you connect the phone to XS++ it will ask you if you want to upgrade the CID or not. Yes, after your EROM CID will be 52 you can apply the patch...

Shitblast: The generated patch is good, I know for sure because that patch was tested on sen-se forum under v2.1 development. First reflash your MAIN firmware, then read this thread How to apply patches with SETool2 Lite V1.11, and follow the instruntions. Is should work. If not try jdflasher. Just read above a few posts and you will find the link for jdflasher...

xulos: I'm working on your problem...

[simox]

Simox, thanks for the link, anas sorry to be late, but I did not receive notify by email for replies of the thread.

that tutorial doesnt replies all of my questions.

please read my quoted post again and try to reply ifd possible, I'm not that newbie, so, dont reply as if I was one ;), just that there are doubts :)

I see, that post doesn't have much sense, sorry...
First upgrade the CID with XS++. It will ask you if you want to upgrade the CID, so press yes. Now you need a CID52 MAIN firmware to generate an unlock patch. Then follow that tutorial to apply the generated patch.