SuperFunction v5.5 by Strong super camera for k750/w800/w810

[tsitsigala]

SuperFunction v5.5 by Strong some codes from Raiderski's(supermode). Thanks to Raiderski mod on Kriomag's 21.91
optimized for the W800-k750.. also works with W810 [CID 36 - CID 49].

COPY camdriver0.dat FILE TO IFS/SETTINGS/CAMERA
--------------------------------------------------------------------------------------------
HOW TO USE SuperFunction:

SuperFunction automatic always on.
Works in normal and fine mode.
Fine mode=improved Fine mode-enchanced ON.
Normal mode=Improved Fine mode-enchanced OFF(there is no Normal mode).

Set the EV setting using joystick then
use the Zoom keys to change the value.
You can see the changes in the viewfinder preview.

Also you can use the SuperFunction driver as simply driver.

-2.0: scene (1.1 Portrait-1.2 Landscape-1.3 Twilight Portrait-1.4 Twilight Landscape- 1.5 Sports-1.6 Beach/Snow-1.7Document)

-1.7: SPOT photometry (1.0 off 1.1 on)

-1.3: EFFECTS(black & white,solarize,negative,sepia)

-1.0: ZOOM

-0.7: BRIGHTNESS

-0.3: NORMAL WHITE BALANCE

0.0: FOCUS (1.0 is auto,1.1 infinite / 1.2 half press shuter manual focus 1.3-4.0 )

+0.3: EXPOSURE(decrease/increase 1.1- 2.0 Normal -3.5)

+0.7: SHUTTER SPEED(1.1-4.0 increase/ decrease speed viewfinder preview)

+1.0: SATURATION manual (1.1 default 1.2-4.0 decrease/increase)

+1.3: WHITE BALANCE BLUE(1.1-4.0 add blue)

+1.7: WHITE BALANCE WELLOW(1.1-4.0 add yellow)

+2.0: WHITE BALANCE GREEN-RED(1.1-2.5 add green 2.5-4.0 add red)


The driver has manualy lock/unlock exposure
is usefully when takes photos indoors and some outdoors to avoid high overexprosure
works only in infinite mode (EV 0.0 +/- zoom 1.1)move the camera to get the desired light press half shot and hold it to lock exprosure then move the camera to the object and take the photo.

The driver has customize fanctions if you want
open the camdriver0.dat with notepad and see the
first codes if you wish can change the default
SHARPNESS-SATURATION-BRIGHTNESS-CONTRAST-EXPOSURE-SHUTTER SPEED(for led only)-NORMAL SPEED
and ENCHANCED NIGHT SPEED.

ALSO YOU CAN ADD OR REMOVE OR CHANGE
POSITION FUNCTIONS IN CUSTOMIZE FUNCTIONS MENU
in camdriver0.dat
(There is manualISO-Contrast-Bilinear Filtre).

TIPS:
For Nightsthots better use manual Speed Shot is faster than Nightmode.

In good daylight outdoor shots use Normal mode.

In low Light conditions and indoors shots use Enchanced mode.

Always use manual White Balance function for better results.


Good Luck to ALL!!!!!!!!!!!!!!!!
Strong