p990 downloaded, how to install?

[xone]

Hi SE fans,

Today i purchased "R9GA001_R6E28" firmwarte for my P990. I'm using XS++ to flash the p990. The problem is XS++ reads and recognizes the p990, but when i press FLASH, it says it doesn't support the phone.

Can anyone help?
TX!

14:27:44| Executing SEMC Smartphone Operations!
14:27:44| Please hold boot key ('@' or 'C') and connect device...
14:27:44| Master Port detected: COM8
14:27:44| Slave Port detected: COM9
14:27:44| Opening Port!
14:27:44| Init master...Init OK!
14:27:44| Aquiring phone info...Info sampled OK!
14:27:44| Sender application header...Sent OK!
14:27:45| Sending application...Sending loaders\db2000_application1_epoc.bin...Sent OK!
14:27:45| Shutting down...Master Shutdown OK!
14:27:46| Baseband ID: 7100
14:27:46| Hardware Platform: db2000 Smartphone
14:27:46| Protocol Version: 3.1
14:27:48| +++ Speed set to 460800
14:27:48| Sending loaders\NPACXC125871_DB2000_PRODUCTIONIDLOADER_R3A .bin...
14:27:49| This is a PRODUCTION_ID loader
14:27:49| ***** Read flash vendor & id (cmd 0D)
14:27:49| ***** Read otp (cmd 24)
14:27:49| Activating GDFS...
14:27:49| Cannot open GDFS
14:27:49| Activating GDFS...
14:27:49| Cannot open GDFS
14:27:49| Activating GDFS...
14:27:49| Cannot open GDFS
14:27:49| Warning: IMEI name does not match GDFS name (IMEI:P990 GDFS:n/a)
14:27:49| ...using IMEI name
14:27:49|
14:27:49| Profiling EPOC smartphone...
14:27:49| Baseband ID: db2001
14:27:49| OTP CID: 49
14:27:49| EROM CID: 49
14:27:49| EROM Color: Red
14:27:49| IMEI: 35959300xxxxxx
14:27:49| Phone ID: P990
14:27:49| Part Number: n/a
14:27:49| Phone firmware version: n/a
14:27:49| Phone smartphone version: R2D01
14:27:49| Activating GDFS...
14:27:49| Cannot open GDFS
14:27:49|
14:27:49| Ready for operation!
14:28:20| Sorry, your phone is NOT SUPPORTED
14:28:20| Error: Cannot send flash loader
14:28:20| ++ Error: Flashing failed
14:28:22| Disconnected... Unplug the phone
14:28:35| Shutting down...
1

[ts014]

wot version of xs++ have u got try 1.6.8 and i don't think it supports smart phones so try setool2 lite 1.08

[xone]

wot version of xs++ have u got try 1.6.8 and i don't think it supports smart phones so try setool2 lite 1.08

,

we have got xs++ 1.6.8 and setool 2 lite 1.08....

[ts014]

do they both not work ???

[xone]

do they both not work ???

Well no, not really, as you see in the log, xs recognizes but than quits...

[ts014]

yea db2000 smartphones aren't supported

[xone]

yea db2000 smartphones aren't supported

Ok, but how do i use this new firmware i just purchased?? :(
Seems a bit strange, you can buy the firmware but no options to use it??

[bugmenot2]

thanks for the ideas

[jibe82]

I have the same problem, do you have fix it ? The cause seems to be GDFS bad writting

[ts014]

xs++ nor setool2 can flash a smartphone but if ur trying to debrand and update to the newest firmware i know how to do it with seus and xs++2.2