Post here any problem with flashing with Setool2 Lite

[ts013]

Is it possible to format it for free?

SE Tool 2 cracked should do the job.

[paladinzluka]

SE Tool 2 cracked should do the job.

We speak about 2020 platform. Setool 2 craked doesn't support 2020

[gsmkiller]

my K800 phone is dead and having problem to flash with Setool2lite

The flash procedure cdan't start so what's wrong

BR GsmKiller :)

[jhacky0816]

i have also a problem after i applied patch on my w810 fone. It turns on but only to the SE logo..afterwards it just blink and cant turn on..what is the problem?

[MUNEEB_AKH]

SE Tool 2 cracked should do the job.

i dont think so becaz it only support Db2010......

[vinodnair4]

welcome to setool2 lite edition v 1.07
supported DB2010/DB2012 CID49/50/51, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35155901265233 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4HA014_CXC1250719_GENERIC_ME
Restore from:R4HA014_CXC1250719_GENERIC_ME
llbug: can't get all data, got:0 expected:5641
verify block error
last blk:441A0000,00010000
ldr_on_ldr hdr no ack,err:00
can't load bypass loader !
Elapsed:94 secs.


this is the error which i get in SE tool

anyway i can recover my gdfs

the set is K 310 , i tried to mod it to W200
i cant even use recovery mode , same error