Problem with XS++...HELP!

[crueldz]

Hi..I'm trying to flash my w600i RED49 with XS++ using dcu-60 usb cable with W600_R7CA017_MAIN_NAM_1_RED49.mbn for the Main Flash and W600_R7CA017_FS_AMERICA_1_RED49.fbn for the File System. :(

Flashing Main Firmware is no problem..its done successfully..but when its time flashing firmware at 114 blocks it gave me this warning..." Failed sending flashblock 130. Returnvalue 0x45 "..:mad:

Now my phone cannot be switch on..But I know its not dead yet because I can still access through FarManager. I can see all the FS and FLASH and can access FS with no problem...And now searching whether I can save the phone via FarManager...:confused:

Anyone outhere can help me on this whether using FarManager or XS++ to "resurrect" back my phone?..Thanks a Lot...:o


Here is the Log for one of the activity captured..

11:47:07| Turn off phone
11:47:07| Hold C Button on phone and connect phone.
11:47:07| You have 30 seconds.
11:47:07| ++++++++++++++++++++++++++++++++++
11:47:12| PORT STATUS: ACTIVE
11:47:12| Baseband ID: 8040
11:47:12| Hardware Platform: db2010 Marita compact
11:47:12| Protocol Version: 3.1
11:47:12| Sending loaders\db2010_cid00_prodid_p3k.bin...
11:47:12| This is a PRODUCTION_ID loader
11:47:12| Activating GDFS...
11:47:13| phone name detected
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| PHONE INFO
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| DBID: db2010
11:47:13| OTP CID: 49
11:47:13| EROM CID: 49
11:47:13| EROM color: Red
11:47:13| IMEI: 35744500xxxxxx
11:47:13| Phone: W600
11:47:13| Operator: AMERICA_1
11:47:13| CDA: CDA102453_120905 120905
11:47:13| Firmware: R7CA017
11:47:13| EROM: n/a
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| Ready for operation!
11:47:51| Sending loaders\db2010_cid49red_flash_r2a003.bin...
11:47:52| This is a FLASH loader
11:47:52| +++ Now flashing firmware main...
11:47:52| Sending flashfile D:\SonyEricssonThingy\Others_fs_mf\W300i_R9A036_MA IN_GENERIC_JE_RED49.mbn
11:47:52| 336 flashblocks
11:54:02| Finishing flash
11:54:04| Done flashing
11:54:04| +++ Now flashing filesystem...
11:54:04| Sending flashfile D:\SonyEricssonThingy\Others_fs_mf\W300i_R9A036_FS _EUROPE_2_RED49.fbn
11:54:04| 161 flashblocks
11:56:19| Failed sending flashblock 130. Returnvalue 0x45
11:56:19| Finishing flash
12:00:08| +++ Sendinging shutdown signal to phone...
12:00:10| Shutting down...

[Eddy87]

Try it with another Firmware!

[raj_s_007]

Hai Your phone is detected by FAR. So Try to Flash your phone using FAR Manager.

[miltank]

SEUS would be good too. :))
Or try, as *Eddy87* said -> try different FW.

GL

[pimpster]

try using phone xc v6 command line

rename flash file to fs-flash.bin
main file to main-flash.bin

select flash.bat and then it starts flashing

after flashing donot start phone

download custom files and copy them in files_to_phone folder

then select finalize.bat

its easy i done it before

[splitter11]

Hai Your phone is detected by FAR. So Try to Flash your phone using FAR Manager.

far manager is an filemanager or not?!?

can i flash my k510i with far too??

[OWIES]

far manager is an filemanager or not?!?

can i flash my k510i with far too??

yes, but with plugin caled SEFP we can get access to FS firmware stored in phone

proably yes, but try to use XS or Phone XS+ and FAR only for customization.

regards

[splitter11]

i just try to flash my k510i with phone xs.

but it doesn´t work.

so i will try with far.

how can i flash it with far?

what files i need?

[miltank]

*splitter11* To use your phone with FAR, you need FAR plugin, called SEFP.
Search the forum - it sould be there, and phone needs to be flashed with special MAIN, included in plugin (use XS++).


GL

[splitter11]

*splitter11* To use your phone with FAR, you need FAR plugin, called SEFP.
Search the forum - it sould be there, and phone needs to be flashed with special MAIN, included in plugin (use XS++).


GL

i´ve just SEPF an far manager too.

where can i find this special MAIN ?