K800i oflash folder is empty

[blassmegod]

Thanks for thr reply, I will try again with version 0.08, but i haven't received any confirmation email from Omnius, but i can login in the site, but on flashing from Omnius it shows me that it can't log in with my credentials.

[blassmegod]

This are the logs from Omnius Identification, replace certificate and restore GDFS.

Action journal

20:44:48   Identify

20:44:48   Shows detailed information about the connected phone.

20:44:48   Operating system: Microsoft Windows XP Embedded Service Pack 3 (build 2600)

20:44:48   Application version: 0.08.2498 (beta)

20:44:48 . The action name is 'Identification'

20:44:48   Selected phone type: K800

20:44:48   Selected connection method: USB EROM

20:44:48 i Instructions

20:44:48 i 1. Make sure the phone battery is charged to at least 50%.

20:44:48 i 2. Switch off the phone!

20:44:48 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!

20:44:48 i 4. Press and hold the button C, then connect the cable to the phone!

20:44:48 . The action started waiting for the user

20:45:49 . The action finished waiting for the user

20:45:49   Connecting via Generic EMP USB Flash Device (USB2)...

20:45:49   Device driver version: 2.2.0.5

20:45:49   Entering baseband CPU service mode...

20:45:49   Detected chipset: DB2020 '9900

20:45:49   Boot mode: ROM

20:45:49   Sending loader...

20:45:49   Flash chip manufacturer: Intel®

20:45:49   Flash chip ID: 897E

20:45:49   IMEI: 3573150168****
20:45:49   OTP CID: 51

20:45:49   OTP area status: Locked

20:45:49   Product type: Retail

20:45:49   Effective CID: 52

20:45:49   Effective color: Red

20:45:49   Initializing GDFS access...

20:46:17 e Failed!

20:46:17 . The action entered shutdown phase

20:46:17 . The action reported failure



Error code

# 9A5CD8C17AC17EF7



Error details

---

17 9D 51 19 2C 48 54 5B 3A 2D B0 65 CA DF 4C 92 

8A 32 86 28 12 59 44 5F 3A 21 37 BA F4 20 C4 2D 

E2 9F 94 58 F5 51 9A 1A 1A 83 70 25 10 17 4F CF 

00 84 F8 29 32 0D 5C 40 22 03 2E 60 7A 61 1C 87 

05 5C 51 36 90 D6 14 65 06 E9 45 C7 13 50 A2 02 

32 FB E8 87 AE 99 FC 15 6A ED A0 1F 34 AC 04 13 

A2 25 D8 C6 1E 69 F4 3B D3 7F FE C3 D6 D1 14 6D 

12 5B 38 ED 99 B4 DB FE 

---

Action journal

20:46:58   Replace FW security certificate

20:46:58   Change the firmware security certificate to enable or disable developer access to the phone content.

20:46:58   Operating system: Microsoft Windows XP Embedded Service Pack 3 (build 2600)

20:46:58   Application version: 0.08.2498 (beta)

20:46:58 . The action name is 'Replace certificate'

20:46:58   Selected phone type: K800

20:46:58   Selected connection method: USB ROM

20:46:58 i Instructions

20:46:58 i 1. Make sure the phone battery is charged to at least 50%.

20:46:58 i 2. Switch off the phone!

20:46:58 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!

20:46:58 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!

20:46:58 . The action started waiting for the user

20:47:05 . The action finished waiting for the user

20:47:05   Connecting via Generic EMP USB Flash Device (USB2)...

20:47:05   Device driver version: 2.2.0.5

20:47:05   Entering baseband CPU service mode...

20:47:05   Detected chipset: DB2020 '9900

20:47:05   Boot mode: ROM

20:47:05   Sending loader...

20:47:06   Flash chip manufacturer: Intel®

20:47:06   Flash chip ID: 897E

20:47:06   IMEI: 3573150168****
20:47:06   OTP CID: 51

20:47:06   OTP area status: Locked

20:47:06   Product type: Retail

20:47:06   Effective CID: 52

20:47:06   Effective color: Red

20:47:06   Restarting the phone...

20:47:08 i Instructions

20:47:08 i 1. Make sure the phone battery is charged to at least 50%.

20:47:08 i 2. Switch off the phone!

20:47:08 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!

20:47:08 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!

20:47:19   Connecting via Generic EMP USB Flash Device (USB2)...

20:47:19   Device driver version: 2.2.0.5

20:47:19   Entering baseband CPU service mode...

20:47:19   Detected chipset: DB2020 '9900

20:47:19   Boot mode: ROM

20:47:19   Sending loader...

20:47:19   Establishing connection to the server...

20:47:22 e Account inactive

20:47:22 e Login failure

20:47:23 e Failed!

20:47:23 . The action entered shutdown phase

20:47:23 . The action reported failure



Error code

# 0E8B48C159D73B41



Error details

---

72 D2 B8 40 11 7B 5F 24 4D 70 75 AC 67 2D 09 3A 

26 D2 0D 31 0F B6 71 C6 E2 9A 73 FF E7 AF 27 3C 

D5 24 D3 F4 A1 09 BF AB AE E5 45 89 07 22 57 46 

17 0B AD AB 01 8B EF AC A3 D8 3C 68 60 AB D7 45 

CB F6 33 0A C2 15 6A 69 A3 7F 4B 88 A7 4C B7 6C 

1B 86 9D 10 B1 8A E1 D9 BD B2 7B 96 F7 2F 19 7C 

6B 16 9A E2 CF 4A 81 84 6D D0 AB A8 B9 9A F6 EE 

F5 88 

---

Action journal

20:48:06   Restore GDFS

20:48:06   Allows to restore the GDFS (Global Data Flash Storage) content.

20:48:07   Operating system: Microsoft Windows XP Embedded Service Pack 3 (build 2600)

20:48:07   Application version: 0.08.2498 (beta)

20:48:07 . The action name is 'Restore GDFS'

20:48:07   Selected phone type: K800

20:48:07   Selected connection method: USB EROM

20:48:07 i Instructions

20:48:07 i 1. Make sure the phone battery is charged to at least 50%.

20:48:07 i 2. Switch off the phone!

20:48:07 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!

20:48:07 i 4. Press and hold the button C, then connect the cable to the phone!

20:48:07 . The action started waiting for the user

20:48:13 . The action finished waiting for the user

20:48:13   Connecting via Generic EMP USB Flash Device (USB2)...

20:48:13   Device driver version: 2.2.0.5

20:48:13   Entering baseband CPU service mode...

20:48:13   Detected chipset: DB2020 '9900

20:48:13   Boot mode: ROM

20:48:13   Sending loader...

20:48:13   Flash chip manufacturer: Intel®

20:48:13   Flash chip ID: 897E

20:48:13   IMEI: 3573150168****
20:48:13   OTP CID: 51

20:48:13   OTP area status: Locked

20:48:13   Product type: Retail

20:48:13   Effective CID: 52

20:48:13   Effective color: Red

20:48:13   Sending loader...

20:48:15   Waiting for loader response...

20:48:15   Loading data from file: MyK800i_GDFS.bin

20:48:15 w A SETool backup file is about to be written to the phone. It can not be verified it is suitable for this phone.

20:48:15 b Click this bar if you want to continue.

20:49:22 e Failed!

20:49:22 . The action entered shutdown phase

20:49:22 . The action reported failure



Error code

# 474AC6D2B1BAAF82



Error details

---

46 3A 57 DB E6 A8 F2 B9 64 05 CA 19 C0 F0 C6 C9 

73 2D 50 EA C8 E7 7E 83 BE 71 9D E5 1E 90 36 0F 

4C 89 CF D7 33 FE 40 46 BC 55 AA 59 0F D7 47 C3 

92 32 E2 95 18 73 A3 AB 95 6D 48 42 90 2F EA 61 

2C 23 52 65 F8 D7 CE 07 8A E6 8A 4D 80 71 7A 9E 

1C 8D C2 CB F1 E5 90 9B EC 9B FA ED 90 31 F6 CB 

82 53 CF AD 

---

[senter]

Thanks for thr reply, I will try again with version 0.08, but i haven't received any confirmation email from Omnius, but i can login in the site, but on flashing from Omnius it shows me that it can't log in with my credentials.

Open http://www.cruiserlog.net/ and resend activation email !

[blassmegod]

Now my K800i it's alive, i have done this:
1. Downgrade certificate to Brown 49;
2. Rebuild GDFS with Ultimate Unlocker;
3. Repaired/unlocked with Ultimate Unlocker;
4. Flashed main and fs, customize with Omnius.
Done.