W580 - Dead ? There's a hope ?!

[SeaMonkey]

When you hear sound - that mean that Setool done his job (you will see in Setool at the end "Ealpsed ..sec) and you can unplag USB cable from phone,reinsert battery and follow thrue the end. If you don't remove battery - that procedure don't work

[rhed2k]

When you hear sound - that mean that Setool done his job (you will see in Setool at the end "Ealpsed ..sec) and you can unplag USB cable from phone,reinsert battery and follow thrue the end. If you don't remove battery - that procedure don't work

Ok, but when I take off the battery, adn reinsert in the phone to boot with "C" pressed, the XS++ don't detect the phone and the windows default sound of detected don't play !!!


More information, that time, I'm not waiting the setool finish, so I finish and the log is:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:XXXXXXXXXX CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:79 secs.