Need HELP z610i

[BIOS]

dear expert!

it was a bad idea to flash my z610i... but anyway...

now I have set_gdfs_props failed!

If you can tell me what to do now? Is it possible to repare this z610i or I have to forget about?

Thanks in advance!


ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3528********* CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:5 secs.

[BIOS]

sorry... I forget to say... it is possible to flash it, but the main problem - mobile not starting any more...

waiting for help...

[ryberto]

does that phone have a power light thats green when its on if so when you press the power does it flash red?

[BIOS]

OK!!! some good! it is starting now!

but problems not gone...

now if I power on after menu about flight and normal mode I choose normal and inpu PIN the next sentence appears on a screen
Configuration error. Please contact your network operator or service center.

Does it mean that I have to flash generic firmware on it?

and what is a comlete set of files?

main like Z610_R6DA001_MAIN_GENERIC_MY_RED52

file customisation like Z610_R6DA001_FS_C_ASIA_RED52 or generic as well?

some think more? finalisation files? what is it and where to get this one?

thanks a lot for answers!

[SeaMonkey]

You need CUSTPACK and you find him in download section - custom files - Z610custpack

[BIOS]

can you say to me where I have to put cust file in SETool? I am fix all problems with z610, but have only russian set of files, by the way it is working well!

[SeaMonkey]

can you say to me where I have to put cust file in SETool? I am fix all problems with z610, but have only russian set of files, by the way it is working well!

Put CUSTPACK in MISC in Setool2lite

[realworks]

if you are using SEtool box just reflash again the phone and check complete phone after flash... and use the latest version...

[BIOS]

Yes, job done! for 2 phones, z610i and k770i, for the second one russian menu desapear after a few starts, but english on a right place, which is OK for me!


could some body tell me, if I make unlock for phone (which was OK) and after reflash again with all 3 files set, what can hapen? do i lose the unlocking or not?

sorry for stupid question, but flashing take a lot of time!

Also I install the quick access pack on phones, question is the same, what hapens is I decide to reflash it again?

Or probably I need only 2 filef FS and CUST?

thanks for answering!

[SeaMonkey]

Yes, job done! for 2 phones, z610i and k770i, for the second one russian menu desapear after a few starts, but english on a right place, which is OK for me!


could some body tell me, if I make unlock for phone (which was OK) and after reflash again with all 3 files set, what can hapen? do i lose the unlocking or not?

sorry for stupid question, but flashing take a lot of time!

Also I install the quick access pack on phones, question is the same, what hapens is I decide to reflash it again?

Or probably I need only 2 filef FS and CUST?

thanks for answering!

If you reflash phone (like with new firmware) you need to apply QA and unlock patch again