Remove SIM-lock patch generator

[SoulFeeder]

I figured out the flasing part by the way it's just the patching part that I need thanks

[gpardi]

Hello there, tried to unlock W710i , CID52 and it works. Thanks

[b3nja]

Hi

Can anyone help me with my problem?

heres the link: http://www.topsony.com/forum/showthread.php?t=11515

[simox]

Do you see a red blinking light near the infra port? Maybe the EROM is damaged. To repair it, follow the REPAIRING EROM GUIDES for most sonyericsson phones.

[bhagiratha]

I tried to unlock my sony ericcson W580i using your guide but came up with a few errors. I took some screen shots so you can have a better idea of what happened.
Not really sure what went wrong, so am hoping someone will let me know.

Specs:
db2020 CID52
EROM: R3A022
Firmware ver.: R8BA024






Thanks

[simox]

Have you installed the USB Flash Driver from [SETool2 Lite v1.11folder]\drivers\USBFlash_driver\ folder? If not then install it: remove the cable from phone, right click on ggsemc.inf and choose Install.
If this will not solve the problem, use jdflasher instead of SETool2 Lite.

[bhagiratha]

Have you installed the USB Flash Driver from [SETool2 Lite v1.11folder]\drivers\USBFlash_driver\ folder? If not then install it: remove the cable from phone, right click on ggsemc.inf and choose Install.
If this will not solve the problem, use jdflasher instead of SETool2 Lite.

I did install the USBFlash_driver. But what I noticed is that when I press the "C" key and connect the cable the phone goes into the usb data transfer mode and windows brings up the window to view the files and folders on the phone. Is that surpose to happen?

Also, I downloaded the jdflasher application, but don't know how to use it.
Can you please link me to some instructions.

thanks again

[simox]

But what I noticed is that when I press the "C" key and connect the cable the phone goes into the usb data transfer mode and windows brings up the window to view the files and folders on the phone. Is that surpose to happen?

NO, it is not normal (the phone display should remain black). This is a driver problem. So install the driver what comes with SETool2 Lite v1.11: You can follow the USB Flash Driver Installation - Guide, but use the driver from [SETool2 Lite v1.11folder]\drivers\USBFlash_driver\ folder, and it should work.

Here is a jdflasher tutorial: JDFlasher DB2020 CID52. But please bear in mind to install the good driver first.

[bhagiratha]

Ok .. since I wasn't having any luck with SETool2 in regards to the USB Flash driver install, I went ahead and tried the jdflasher tutorial.
I followed the instructions to the "T" and all seem to have gone well ... didn't encounter any errors and the phone stayed at the "black screen" throught out the process.

After all was done I restarted the phone and it was as I left it before trying to unlock it. Now my question is, how can I tell for sure that the phone is unlocked?

thanks again Simox for all your assistance!

[robby]

it sure worked for me on my SEk790 thanks