W200i from USA...need to unlock to work in India

[avadhoot]

My brother was using W200i in US during his 6 months stay. Now i need to use this cell here in India. I inserted my Vodafone Sim in the phone but it still says "Insertar Tarjeta SIM"

If im not worng the freqency used by both countries are different. India mostly uses GSM network.

How do i solve this problem?

Thanks in advance.

[riders4sia]

your phone is a network lock, you need to unlock, the best thing is debrand it and unlock it and you'll need far+jdflasher
Read the following tutorial
1st : USB Flash Driver Installation - Guide - Top Sony Forums
2nd : XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums and post the log here so that we can tell you what files to use for debranding your phone
3rd : Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums but use files only for W200 (when you post the log, we will tell you what files to use)
4th : Remove SIM-lock patch generator - Top Sony Forums to generate your simlock patch
5th : Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums if your phone is CID53 or Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums if you phone is CID52 or below (CID49, CID50, CID51)

[avadhoot]

13:15:04| XS++ v3.1 (Darwin) Ready !

13:15:04| Executed on Microsoft Windows XP

13:15:09|

13:15:09| Attempting to open the interface...

13:15:09|

13:15:09| TURN OFF PHONE!

13:15:09| Hold 'C' button on phone and connect phone NOW.

13:15:09| You have 30 seconds...

13:15:09|

13:15:39| Error: Cannot open phone communication port

13:15:41| Disconnected... Unplug the phone

[philzfog]

make sure the phones turned of and u have the flash usb driver instailed on ur pc

[avadhoot]

make sure the phones turned of and u have the flash usb driver instailed on ur pc

In the guide it says i have to select SEMP.
http://img337.imageshack.us/img337/1774/19389555zs8.jpg

but when i download the software it is SEMC usb flash driver:confused:

When i installed the driver it says "wdfcoinstaller01005.dll" file not found.

When i try XS++ V3.1 is connecting phone failed.

[riders4sia]

In the guide it says i have to select SEMP.
http://img337.imageshack.us/img337/1774/19389555zs8.jpg

but when i download the software it is SEMC usb flash driver:confused:

When i installed the driver it says "wdfcoinstaller01005.dll" file not found.

When i try XS++ V3.1 is connecting phone failed.

there is no SEMP driver, it should be SEMC, download setool from here : Top Sony Forums it contains driver for SEMC or you may also try below attached file

[avadhoot]

Now while Backing up DGFS i get this error.

22:25:52| Phone name detected!
22:25:52|
22:25:52| Profiling SEMC phone...
22:25:52| Platform: DB2010
22:25:52| OTP CID: 51
22:25:52| EROM CID: 53
22:25:52| EROM Color: Red
22:25:52| IMEI: 35735501xxxxxx
22:25:52| Phone ID: W200
22:25:52| Region: TELEF_GEN
22:25:52| CDA: CDA102738/57 R11A
22:25:52| Firmware Version: R4GB001
22:25:52| EROM: n/a
22:25:52| Ready for operation!
22:25:56| Sorry, your phone is NOT SUPPORTED
22:25:56| Error: Failed to send CSLoader!
22:25:56| FSX Shutdown!
22:25:58| Disconnected... Unplug the phone

[philzfog]

xs or se tool doesnt surport cid 53 phone u are going to have to pay to have it unlocked
22:25:52| OTP CID: 51
22:25:52| EROM CID: 53