W200i Unlocking

[jocoolguy]

there is a simple method to unlock,leave other alternatives
get unlock code here and then unlock it http://www.onlinegsmunlock.com/

[riders4sia]

Hi,
I'm having some hassle unlocking a w200i can someone look at the log and tell me where i'm going wrong?


I would genuinely appreciate any help guys!

Insane.

Read here : Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums
and here : Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums

[riders4sia]

Simox, I have a w200i DB2012 CID52 RGB001_MAIN_GENERIC_RED52.
I used your Remove SIM-lock patch generator v2.2 to generate the patch.
I created the REST file.
Then I ran Setool2lite v1.11 and tried to flash with the unlock patch using DCU-60 cable.

I got the following message which indicates failure to flash.
Can you tell me what does it mean ?

=========Setool2lite session log=========IDENTIFY
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W200i
Brand:Optus
MAPP CXC article: R4GB001 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4GB001
Language Package:EUROPE_2
CDA article: CDA102738/14
CDA version: R3A
Default article: cxc1250728
Default version: R4GB001

Network LOCKED
Operator: 505-02

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:14 secs.
===================FLASH with VKP file
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: D:\mobile\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W200_R4GB001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:15 secs.
=========end of log=========

i think you need to apply quick access first like in db2020 phones

[kanaga]

you cannot unlock W200i for free of cost. But you can purchase the code from Online GSM Unlock.com- Unlock Your Phone and unlock it at very low cost

[sums]

When i put my .mbn file in mkrest.exe, it blinks a screen and disappears. What can i do

[pHysiX]

old topic, so sorry to revive but good news.

managed to UNLOCK CID 52 W200 =]

[nightrider70]

w200 cant be unlocked for free

In my suggestion don't use free unlocking code for your mobile phone. Because you use this free code after you face lot of problem into your mobile. So better you try to get your mobile unlocking code from here. it's a pay codes site but reasonable cost.

[idnaf72]

I haven't tried this method neither... what is the problem? the executor?

I have w200i, R4HA014......and I've followed the instruction to that step>"run the executor"....but when I ran it, there was a message "operation failed".....why?what does it mean?