i have the same problem with s500....
Hi
I have a major problem and despite struggling with my w580 phone for the last 1 day,
uing FarManager, SeTool2, SeTool2Lite and XS++ i have been unable to resolve the issue !!
1. I have a sony ericsson phone (W580i ) from Rogers Telecom (bought in Dec 2007), which i had unlocked in Feb 2008.
2. It was unlocked perfectly and was working fine until i decided to automatically upgrade it.
I used SEUS ( the automatic update service ) to update my phone. After the update,
I used the phone on Rogers network, and later kept it aside since I had gotten another phone.
3. Now almost after 1 year I took out the W580 phone again, bought a Fido SIM and tried using it,
only to realize that it will not accept any non-Rogers SIM.
4. I researched on forums and tried checking my firmware to realize that W580 security had been automatically
upgraded to CD53 and the phone was relocked to Rogers ( perhaps during the SEUS update).
5. I have used FarManager to Flash W580 with a new CD53 Firmware and FS, but the phone is still locked.
6. I also generated a phone unlocking TKP patch using SIMLockPatchGen_v2.2.rar ( for the new CD53 firmware / MBN )
but i am unable to apply it using setool2lite ....
Please help me with this, as I am really confused and need to fix this ASAP !!
find below the setool2lite logs while IDENTIFYING, BACKING UP GDFS and APPLYING UNLOCK TKP SCRIPT ...
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
MAPP CXC article: R8BA024 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BA024
Language Package:T_MOB_INT_B
CDA article: CDA102774/165
CDA version: R2A
Default article: cxc1123364
Default version: R8BA024
Network LOCKED
Operator: 302-72
Elapsed:28 secs.
Will backup GDFS now.
<< I cancelled the operation since it doesn't work beyon this point >>>
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.
Basically, after identifying the phone succesfully setool2lite is not able to do any other
operation, neither can it read GDFS properly, nor can it write the TKP script !!!
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "READ GDFS" and insert cable while pressing in C key )
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:6 secs.
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "WRITE SCRIPT" and insert cable while pressing in C key )
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:0 secs.
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "READ GDFS" and insert cable while pressing in C key )
Also, i wanted to to know if above steps are the right way to use setool2
As far as FarMNanager is concerned, once the phone it identified i donot have to dicsonnect everytime after flashing firmwares or uploading XML files ???
So does, setool2 reauire me to connect the phone everytime again for each new operation ?
Also would it be possible to generate the unlock code based on the IMEI number ??( perhaps decoding the tkp patch info may help)
thanks a lot for the help !
Ode
LOG FOR UNLOCK PATCH ------------------------------------------------------------------
---------------------------------------------------------------------------------------
welcome to Remove SIM-lock patch generator v2.2
supported firmwares: DB2000/DB2010/DB2012/DB2020 CID36/CID49/CID50/CID51/CID52/CID53
This tool is free, do not pay for it to anybody!
You can drag firmware files here...
Selected firmware: 'C:\Ode\Sony Ericsson\Firmware Updates\20090508_to_apply\W580_R8BA024_MAIN_GENERI C_LA_RED53.mbn'
Analyzing firmware...
BABE header found and seems OK.
Generating raw firmware...
Firmware generated.
Getting firmware info...
Firmware info:
Phone Model: W580
Firmware Version: R8BA024
Firmware Branding: GENERIC
Firmware Platform: DB2020
Firmware CID: 53
Firmware Color: Red
Base Address: 44140000
Searching for required addresses...
Addresses found.
Generating vkp patch...
'C:\Documents and Settings\odeseus\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W580_R8BA024_GENERIC .vkp' patch file created.
Finished.
AS SEEN ABOVE, I NOTICED THAT THE BASE ADDRESS OF THE FIRMWARE IS 44140000 INSTEAD OF DEFAULT 44000000 ( In setool2lite )
DO I NEED TO CHANGE THE BASE ADDRESS WHILE APPLYING THE UNLOCK TKP SCRIPT THROUGH SETOOL LITE ?
even chaging the address gives the same results.
1. either iam not applying the tkp script properly
2. or the cd3 unlocking is not working ???
---------------------------------------------------------------------------------------
you need to do all operations with FAR+Jdflasher, none of the software work on CID53 phone
Read here : Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums but use files only for w580
here for unlocking procedure : Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums
There are currently 1 users browsing this thread. (0 members and 1 guests)