dont know if this is the right section to ask for this but anyway.
i nned v600 testpoint sulution.
if some one have any good picture where the testpoint is.
and what can i use to do testpoint with.
does a cable and a needle work?
Printable View
dont know if this is the right section to ask for this but anyway.
i nned v600 testpoint sulution.
if some one have any good picture where the testpoint is.
and what can i use to do testpoint with.
does a cable and a needle work?
Box(setool2,3) have testpoint .
Why you want use it?
i neeed it to flash a erom to the phone with usb-smart 8.4 it wont flash erom withouth testpointQuote:
Originally Posted by marn
marn: He asked for the picture, not for programmes that are able to handle it.
nissenisse: Try SE Tool 2 Cracked, Testpointing should'nt be required at all.
Just type K600 testpoint in google picture search, you'll find everything you need (but I don't think you need testpoint at all).
setool2 cracked dont want to take the phone it say something with coverdly refused to load empty loaderQuote:
Originally Posted by justme
What caused the problem? Please give some details (what happened, what CID do you have etc). I don't think testpointing is necessary.
But anyway, if you want to go for the testpoint:
You can use a piece of wire or, like you mentioned, a needle.
It's not my phone but the guy disconnected it when flashing after that he flashed it again. it worked but customize did not work so good so he customized it again but the gdfs was corupted and he writed a new clean gdfs to phone. reflashed the phone and started it but the loading in the begining of start stands on about 5% and wont go longer the phone is cid49. i have looked for a erom to flash with xs++ becuse it dont need testpoint but i can find it.
i have many different erom files for usb-smart but in usb smart i need to do testpoint.
You have to unlock the phone after writing a blank GDFS, did you do that?
yes it was unlocked after gdfs writing.Quote:
Originally Posted by justme
i have fixed the phone now.
a strange thing happend i have tryied to use repair function and other things many time but usb-smart never wanted to do it but now it wanted to repair phone without doing any special.
but it stil dont want to customize
If you still need that picture, I did lot of time that TP and can upload some pictures
No need to upload, like i said you get them instantly if you type k600 testpoint in google ;)
if you write blank gdfs you format old gdfs.because may new value dont same by old value.so format old gdfs then write blank gdfs.
i want the picture i'm going to flash the erom any way becuse something is stil not right with the phone and it's good to have.
Didn't you read my previous posts?
yes but the testpoint picture on the net dont for K600 and K608 does not look like the one on this v600Quote:
Originally Posted by justme
the image is from this phone and it does not have all tha parts like in k600 and k608.
look att the image with the word tp that area does not exist in this phone
There are two testpoints, try the other one:
Test Point de celulares - Top Sony
K600/K608 and V600 use the same hardware. I just looked at an old V600 I have here, it really seems like your board misses some pins.
i have tryed that testpoint to and that didnt work. it seems like it some differens betven swedish V600/K600/K608 and other countrys.Quote:
Originally Posted by justme
look here Dead K608 - SE-NSE Forums this is a swedish K608 and that to does not have that testpoint area.
Now thats really strange...
Anyway, if you got something like that:
PHONE IS INVISIBLE (00000000)
NO VALID FLASH CID DETECTED (00)
on SE Tool it's most likely that it's a problem with the hardware.
this is what i get when trying to flash erom with setool but it works to flash main and fs with xs++ but not in setoolQuote:
Originally Posted by justme
Loaded 49 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Cowardly refusing to load empty loader.
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:1 secs.
During TP, with semc tool -FLASH CID DETECTED- should be 29
I attach the tp I used for k608i (should be the same).
i will test this tomorowQuote:
Originally Posted by berthstein
Any positive results?
i didnt have time to try it that day but i'm about to try it now so we will se if come back and cry or give you a kiss :)Quote:
Originally Posted by berthstein
i have tried all the testpoint but dont work this phone is different then others will soon trow it out the window
What window?!
*edit* I read "try out the window" instead of "throw it out the window".
Sorry if that upset you even more :rolleyes:
Send it to me I'll do it for you!!
That's a nice offer but the shipping cost may be more expensive than buying one on ebay ;) Just got on today for less than 30€ (incl. shipping costs).
i think to that it will be expensiv to ship from sweden.
the phone works but it's some kind of problem with the erom.
Dont know why it should be so hard to find a cid49 erom for this model that i can flash with xs++