K800i locked to 3 > needs to use orange sim

hi guys,

ive used the forum before to fix my own broken phone and got great assistance to do it :D
I now have another k800i which is currently locked to 3. i need to unlock this (or debrand whatever) so i can use an Orange sim card in it.
i tried to reflash but now kinda stuck.

here is the log from xs++ when i first connected the phone.

14:01:19| Baseband ID: 9900
14:01:19| Protocol Version: 3.1
14:01:19| Phone name detected!
14:01:19|
14:01:19| Profiling SEMC phone...
14:01:19| Platform: DB2020
14:01:19| OTP CID: 49
14:01:19| EROM CID: 49
14:01:19| EROM Color: Red
14:01:19| IMEI: 35170701xxxxxx
14:01:19| Phone ID: K800
14:01:19| Region: HUTCH_1
14:01:19| CDA: CDA102511/69 R14A
14:01:19| Firmware Version: R1CD001
14:01:19| EROM: R3A011
14:01:19| Ready for operation!

14:01:44|
14:01:44| Sending db2020_cid01_prodid_p3j.bin...
14:01:44| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
14:01:44| This is a PRODUCTION_ID loader
14:01:44|
14:01:44| Sending db2020_mem_patcher_cid49_r2a006.bin...
14:01:44| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
14:01:44| This is a MEM_PATCHER loader
14:01:44|
14:01:44| Sending db2020_red49_cs_r3a009.bin...
14:01:46| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
14:01:46| This is a CHIPSELECT loader
14:01:46| Activating loader...
14:01:46| Activating GDFS...
14:02:06| This loader is UNLOCKED
14:02:06| Run GDFS-script...
14:02:06| Wrote 1 variables!
14:02:06| Read 0 variables to .\Backup\K800_35170701xxxxxx_GDFSSCRIPT_OUTPUT_080 105140206.script!
14:02:06| GDFS-Script was run successfully!
14:02:06| GDFS operation was successful
14:02:08| Disconnected... Unplug the phone
14:03:10|
14:03:10| Attempting to open the interface...
14:03:10|
14:03:10| TURN OFF PHONE!
14:03:10| Hold 'C' button on phone and connect phone NOW.
14:03:10| You have 30 seconds...
14:03:10|
14:03:16| Baseband ID: 9900
14:03:16| Protocol Version: 3.1
14:03:16| Phone name detected!
14:03:16|
14:03:16| Profiling SEMC phone...
14:03:16| Platform: DB2020
14:03:16| OTP CID: 49
14:03:16| EROM CID: 52
14:03:16| EROM Color: Red
14:03:16| IMEI: 35170701xxxxxx
14:03:16| Phone ID: K800
14:03:16| Region: HUTCH_1
14:03:16| CDA: CDA102511/69 R14A
14:03:16| Firmware Version: R1CD001
14:03:16| EROM: R3A011
14:03:16| Ready for operation!

it changed something from 49 to 52 automatically but im not sure what it was.

if someone could assist or point me in the direction of which files i need to download then it would be much appreciated.

thanks :D

Remove SIM-lock patch generator - Top Sony Forums

Ever heard about the search option or sticky threads? :p

hey yeah i was following that guide but didnt get it to work :(

not sure if im using the wrong main firmware?
was using this one which i had previously used on my own phoen (and worked)
K800_R8BA024_FS_MEDITERR_RED52.fbn

probably something simple!

You need any firmware (better newer version) you want, just check the CID52, so with XS++ add main + fs with customize checked flash that firmware (debranding). With main and the right vkp (unlocking patches) open setool lite and apply the patch togheter with main.
Good luck

Quote:

---

Originally Posted by mogyi1888

hey yeah i was following that guide but didnt get it to work :(

not sure if im using the wrong main firmware?
was using this one which i had previously used on my own phoen (and worked)
K800_R8BA024_FS_MEDITERR_RED52.fbn

probably something simple!

---

Are You Talking About Main? The One You Mentioned Is Not MAIN Its FS. Main Would Be Like Generic etc.

you need to change CID49 to CID 52 with XS++ and after that you need to use Remove SIM-lock patch generator - Top Sony Forums

Quote:

---

Originally Posted by mohdumer

Are You Talking About Main? The One You Mentioned Is Not MAIN Its FS. Main Would Be Like Generic etc.

---

sorry this is the main i was using

K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn

Quote:

---

Originally Posted by stamenco

you need to change CID49 to CID 52 with XS++ and after that you need to use Remove SIM-lock patch generator - Top Sony Forums

---

this is the bit i got stuck at. it updated part of it automatically when i connected the phone to xs++

14:03:16| Profiling SEMC phone...
14:03:16| Platform: DB2020
14:03:16| OTP CID: 49
14:03:16| EROM CID: 52
14:03:16| EROM Color: Red

but now you see that one part is 49 and the other is 52? how do i change this?

OTP Is Something Different Than EROM. That Doesnt Matters. The Main Thing You Need To Concern With It EROM Here.

mogyi1888:

Quote:

---

but now you see that one part is 49 and the other is 52? how do i change this?

---

XS++ updated the EROM CID from 49 to 52, which is required to unlock your phone by patch.
The OTP CID is programmed by SE, and cannot be changed later. That is why you have the OTP CID: 49 and EROM CID: 52...

Don't worry your phone is just fine ;)

Now follow the guide in Remove SIM-lock patch generator thread...

Quote:

---

Originally Posted by simox

mogyi1888:

XS++ updated the EROM CID from 49 to 52, which is required to unlock your phone by patch.
The OTP CID is programmed by SE, and cannot be changed later. That is why you have the OTP CID: 49 and EROM CID: 52...

Don't worry your phone is just fine ;)

Now follow the guide in Remove SIM-lock patch generator thread...

---

do you need to use setool2lite to do this?

every time i try to add a file it just locks up?

running windows xp and have disabled anti-virus. can you do this using xs++??

also my anti-virus is reporting the qamaker exe as a virus - is this normal?

Yes, you need to use SETool2 Lite v1.11 to apply the patches. XS++ cannot apply patches at the moment.

Quote:

---

also my anti-virus is reporting the qamaker exe as a virus - is this normal?

---

NO, it is not normal at all. My advice is to update your antivirus and make a full virus scan on your computer. Then download the SETool2 Lite again, and make sure that it is not infected with some malware...
You can download from here(it is clean): http://rapidshare.com/files/80561870...g.net.rar.html

Quote:

---

Originally Posted by simox

Yes, you need to use SETool2 Lite v1.11 to apply the patches. XS++ cannot apply patches at the moment.

NO, it is not normal at all. My advice is to update your antivirus and make a full virus scan on your computer. Then download the SETool2 Lite again, and make sure that it is not infected with some malware...
You can download from here(it is clean): http://rapidshare.com/files/80561870...g.net.rar.html

---

is this a complete setool lite v1.11? i cannot use rapidshare in work so cannot download.

i was getting the virus errors after downloading v1.10 then using the upgrade patch to add the qamaker folder and exe.

download work fine

Yes, it is a complete SEtool2 lite v1.11
You can download form here as well: http://www.4shared.com/file/35050308..._v111.html?s=1
Or just search for it, using any search engine...

Quote:

---

i was getting the virus errors after downloading v1.10 then using the upgrade patch to add the qamaker folder and exe.

---

Understand... Then there is no problem. It is normal that in this situation the AV detects virus like activity. No need to worry...

Quote:

---

Originally Posted by simox

Yes, it is a complete SEtool2 lite v1.11
You can download form here as well: http://www.4shared.com/file/35050308..._v111.html?s=1
Or just search for it, using any search engine...

Understand... Then there is no problem. It is normal that in this situation the AV detects virus like activity. No need to worry...

---

Woo Hoo! I got it to work. Thanks very much for your help :D

i think my version of setool2 lite was corrupted when i updated from v1.10 to v1.11? The update patch didn't apply properly.

anyway that download you provided worked perfectly. cheers :)

it can be done ive done mine

You can easily patch unlock using setool and xs++

Flash your phone and How to apply or remove patch using SETool 2 Lite

Nice day