Printable View
My brother Debranded my w580i Successfully but then my he was trying to fix something but now my phone doesn't want to work when ever i try to turn it on it show a red light please can someone help me i really need my phone it my life please and thank
Your EROM Is Dead. You Need To Repair It. See REPAIRING EROM GUIDES for most sonyericsson phones - Top Sony Forums
Blinking red led in the infra red port. If is that, then look one post above.
If is not this, then tried it to flash again.
Nice day
you can try to flash again with others files.
for my own experience...... i have two pieces which experenced such situation
just like k610, but cannot be done via EROM upgrade
the first pieces i use a hot airgun to blow the board until cannot read IMEI
replace with another one and get it to sony ericsson
i hope the 2nd pieces need not to do so
it only get trouble in import and self-change languages w580i
for those which have a gurantee by sony ericsson does not get such errors
i have discoverd the problem 3 months ago and cannot get anyway to fix it
hope will have a free EROM update soon
Please try to connect it to SE Tool lite and post your log.
If connecting with "c" doesn't work try "2+5". And do try a service cable if you have one.
It's most likely a dead flash chip.
this shld work ..!! it worked just for friend
Simplest tut here
click on Unlock\Repair in SeTool 2 lite 1.11 !!
Reinsert battery
then connect phone holding 2+5 .. ! just leave it !!
it will get back alive in 40 seconds ..!!
This will only work if the EROM is still the original one :(
That's why I asked for the log.
PLEASE HELP ME
I HAVE KILLED MY PHONE
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
Abort all operations.
wrong response, break.
failed, that is fatal
Elapsed:33 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed:195 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:20 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:11 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
Abort all operations.
wrong response, break.
failed, that is fatal
Elapsed:14 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
Model:W580i
Brand:Orange
MAPP CXC article: R8BA024 prgCXC1123474_ORANGE_LA
MAPP CXC version: R8BA024
Language Package:ORANGE_GEN
CDA article: CDA102774/18
CDA version: R5A
Default article: cxc1123364
Default version: R8BA024
Network LOCKED
Operator: 234-33
Elapsed:35 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:9 secs.
RECOVERY MODE STARTED
Abort all operations.
Elapsed:2 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:1 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:4 secs.
MY PHONE DOESNT EVEN TURN ON,WHEN I PRESS THE POWER BUTTON IT VIBRATES ONCE VERY QUICKLY
IM GONNA TRY AND FLASH IT AGAIN.
1)Recovery mod not support for this cid.
2)you click buttons then click cancel.why?
3)its good you have backup gdfs.
4)for solve problem flash phone agian if you want just add main (same by fs ver)
5)if you add "use quick access patch" before flash phone by main frist remove this patch.
5)When you remove patch(up) dont forget mark "bypass DB2020 security".
6)Now add main and click flash.
7)Dont add fs because if add it you must custome pack
Dont forget choose phone model.
8)your phone trun on.
Did you tick the bypass db2020 security? AND try the 2+5 to repair?
If you before "use quick access patch" mark it enough.but i think it dont work.flash phone by main
heres my log
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:9 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:12 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35683401685901 CERT:RED
FLASH CID:52 COLOR:RED
Model:W580i
Brand:Orange
MAPP CXC article: R8BA024 prgCXC1123474_ORANGE_LA
MAPP CXC version: R8BA024
Language Package:ORANGE_GEN
CDA article: CDA102774/18
CDA version: R5A
Default article: cxc1123364
Default version: R8BA024
Network LOCKED
Operator: 234-33
Elapsed:6 secs.
it flashes red at the side i think the erom is nackered.
im gonna try 1 of the guides can some1 help me please.
step by step guide?
thanks Ashley
Red blinking on the side light, maybe EROm is broken or Dead battery.
Did you charge it?
hi guys i just got the same red ring of death problem on my 580i , i click the power button and the red light on the C button flashes this is my log on setools
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100487600 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:143 secs.
any recommendations would really help!!! ill reply6 quickly thanks!!!
what did u do? Looks like a brick to me. Do you have a backup of the GDFS for that phone?Quote:
Originally Posted by ynotrhyme
I also had the very same problem of error:29, which most probably is a brick.
even the service centre couldn't repair it and i got a new set.
if u wanna give EROM update a try then use KulanKendi. it will surely update ur EROM. After that try to Flash ur Main, FS and customization. That is ur only hope.
try using XS++ to flash again, that might help