W810i dead after flash

Printable View

12-05-2007
Coramoor

W810i dead after flash

I flashed a CID49 W810i with XS++ with below stated files and it was successfully except the last custom files wouldn't finish properly. The phone is dead and can't be started at all now. I've looked at tons of threads but can't figure it out. Anyone who can tell me where I did wrong and how I can solve it? Thank you.

W810_R4DB005_MAIN_GENERIC_HN_RED49.mbn
W810_R4DB005_FS_EUROPE_4_RED49.fbn
W810_CDA102555_13_R2A_Generic_EUROPE_4

My process so far:
Ready for operation!
23:45:20| Sending loaders\db2010_cid49red_flash_r2a003.bin...
23:45:21| This is a FLASH loader
23:45:21| ***** Read flash vendor & id (cmd 0D)
23:45:21| ***** Read otp (cmd 24)
23:45:21| +++ Now flashing firmware main...
23:45:21| Sending flashfile C:\Program Files\XS++\W810_R4DB005_MAIN_GENERIC_HN_RED49.mbn
23:45:21| 343 flashblocks
23:48:07| Finishing flash
23:48:07| Done flashing
23:48:07| ++ Flashing was successful
23:48:09| Disconnected... Unplug the phone
23:49:10| Attempting to open the interface...

23:51:30| Ready for operation!
23:51:43| Sending loaders\db2010_cid49red_flash_r2a003.bin...
23:51:43| This is a FLASH loader
23:51:43| ***** Read flash vendor & id (cmd 0D)
23:51:43| ***** Read otp (cmd 24)
23:51:43| +++ Now flashing filesystem...
23:51:43| Sending flashfile C:\Program Files\XS++\W810_R4DB005_FS_EUROPE_4_RED49.fbn
23:51:43| 161 flashblocks
23:53:00| Finishing flash
23:53:01| Done flashing
23:53:01| ++ Flashing was successful
23:53:03| Disconnected... Unplug the phone
23:56:29| Attempting to open the interface...

00:25:21| Ready for operation!
00:26:06| +++ Flashing breakin...
00:26:06| Sending loaders\db2010_cid49red_flash_r2a003.bin...
00:26:07| This is a FLASH loader
00:26:07| ***** Read flash vendor & id (cmd 0D)
00:26:07| ***** Read otp (cmd 24)
00:26:07| Sending flashfile loaders\W810.bin
00:26:07| 5 flashblocks
00:26:09| Done flashing
00:26:09|
00:26:09| Disconnect phone from USB-port and wait for
00:26:09| further instructions.
00:26:09| You have 10 seconds.
00:26:09|
00:26:19| Open the battery-cover and reinsert the battery.
00:26:19| Hold C Button on phone and connect phone again.
00:26:19| You have 30 seconds.
00:26:19|
00:26:28| Baseband ID: 8040
00:26:28| Hardware Platform: db2010 Marita compact
00:26:28| Protocol Version: 3.1
00:26:28| +++ Phone has restarted successfully...
00:26:29| This is a PRODUCTION_ID loader
00:26:29| Sending loaders\db2010_cid49brown_cs_v26.bin...
00:26:30| Binary acknowledge failed with: 89
00:26:30| Failed sending datachunk
00:26:31| Failed sending header: 0x00
00:26:31| Error: FSX failed.
00:26:31| ++ Error: FSX failed
00:26:33| Disconnected... Unplug the phone
00:28:04| Shutting down...
12-05-2007
djape48

00:26:29| Sending loaders\db2010_cid49brown_cs_v26.bin...
Was your phone cid49 brown? What happens now when you connect phone to xs++, can xs identify your w810?
12-06-2007
nitroblu

djape84 brings up a good point. if you had a brown phone, u needed to change it to red before flashing with "red" files.

also, if you used XS++ with your w810i, the custom files should already have been in the drop down list in FSX.

if your version wasn't there, then you should have unzipped our custom files, and put in the directory "own_custpack/tpa/preset/custom", where "own_custpack" should be in the same directory as XS++
12-06-2007
Coramoor

I don't know if it's CID49 brown. Most of the time I get "Did not receive 0x5a. Continuing.." when I try to connect the phone again through xs++.
12-06-2007
ts014

get xs++3.1 and reflash ur main
12-06-2007
devnull9836

If you can't connect or are having trouble to connect your phone to the computer using a normal DCU-60 cable then try using a service cable and it should work better.
12-06-2007
j313c

Hello there, I have the same problem with the same w810i, I flashed it with XS++3.1 and Far Manager softs with the firmware R4EA031_MAIN_GENERIC_HN_RED49, I do this yesterday, and now is gone, nothing, dont want to boot just the screen flashing white, I thought that is normal and desapear in few secs but I leave the phone all night and now continue apearing the white screen, Im going to try to flashing with xs++3.1, I hope this can fix it, or I going to be waiting for be available to download the new firmware R4EK001 (RED49/RED50). I want my phone back to life :(
12-06-2007
Coramoor

Ok, I will try and reflash it with 3.1 :). Hopefully that will do the trick. I got a hold of a service cable as well, will use that instead.

OK this is not going to well. Using XS++ 3.1 with both USB DC-60 cable and a 2in1 cruiser cable and neither seem to be able to access the phone. The DC-60 cable only produces the response " "Did not receive 0x5a. Continuing.." while the cruiser cable won't even go that far. Any ideas?

Ok after some more trying I got it to connect to the phone with the 2in1 cable and the phone is red and not brown. Trying to re-flash the main and all now.

23:26:33| Attempting to open the interface...
23:26:33| Baseband ID: 8040
23:26:33| Protocol Version: 3.1
23:26:34| Speed set to 115200
23:26:34| Sending db2010_cid00_prodid_p3l.bin...
23:26:38| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
23:26:38| This is a PRODUCTION_ID loader
23:26:38| Activating GDFS...
23:26:39| Phone name detected!
23:26:39| Restarting phone - please wait...
23:26:45| Baseband ID: 8040
23:26:45| Protocol Version: 3.1
23:26:46| Speed set to 115200
23:26:46| Phone has restarted successfully...
23:26:46| Profiling SEMC phone...
23:26:46| Platform: DB2010
23:26:46| OTP CID: 49
23:26:46| EROM CID: 49
23:26:46| EROM Color: Red
23:26:46| IMEI: 35233601xxxxxx
23:26:46| Phone ID: W810
23:26:46| Region: EUROPE_2
23:26:46| CDA: CDA102494/2 R4A
23:26:46| Firmware Version: R4ED001
23:26:46| EROM: n/a
23:26:46| Ready for operation!
23:27:48| After making any changes with FSX
23:27:48| you must press the 'Shutdown' button
12-06-2007
j313c

I flash it again with another firmware and it works! is Alilve! :D

IT WORKS!! man!! Im very happy couse I would fix my W810i! I just flash it again with this firmware W810_R4EK001_MAIN_GENERIC_HN_RED49 and this W810_R4EK001_FS_AMERICA_2_RED49 use it the XS++3.1 and FAR 1.7 o yeah and I use the USB DC-60 cable ;)

this is my log from XS++3.1

17:07:59| XS++ v3.1 (Darwin) Ready !
17:07:59| Executed on Microsoft Windows XP
17:08:05|
17:08:05| Attempting to open the interface...
17:08:05|
17:08:05| TURN OFF PHONE!
17:08:05| Hold 'C' button on phone and connect phone NOW.
17:08:05| You have 30 seconds...
17:08:05|
17:08:10| Baseband ID: 8040
17:08:10| Protocol Version: 3.1
17:08:10|
17:08:10| Sending db2010_cid00_prodid_p3l.bin...
17:08:10| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:08:10| This is a PRODUCTION_ID loader
17:08:10| Activating GDFS...
17:08:11| Phone name detected!
17:08:11|
17:08:11| Profiling SEMC phone...
17:08:11| Platform: DB2010
17:08:11| OTP CID: 49
17:08:11| EROM CID: 49
17:08:11| EROM Color: Red
17:08:11| IMEI: 35657401xxxxxx
17:08:11| Phone ID: W810
17:08:11| Region: EUROPE_1
17:08:11| CDA: CDA102295/7 R2A
17:08:11| Firmware Version: R4ED001
17:08:11| EROM: n/a
17:08:11| Ready for operation!
17:08:47| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:08:47| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:08:47| Generic(non-branded) custpack: Yes
17:08:47| Allowed languages: en, pt, es, fr,
17:08:47| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:08:52| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:08:52| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:08:52| Generic(non-branded) custpack: Yes
17:08:52| Allowed languages: en, pt, es, fr,
17:08:52| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:10:30| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:10:30| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:10:30| Generic(non-branded) custpack: Yes
17:10:30| Allowed languages: en, pt, es, fr,
17:10:30| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:03| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:03| Custpack: AMERICA_2 (CDA102494/76) (W810)
17:13:03| Generic(non-branded) custpack: Yes
17:13:03| Allowed languages: en, pb, xl,
17:13:03| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:32| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:32| Custpack: AMERICA_2 (CDA102494/76) (W810)
17:13:32| Generic(non-branded) custpack: Yes
17:13:32| Allowed languages: en, pb, xl,
17:13:32| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:44| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:44| Custpack: AMERICA_2 (CDA102555/107) (W810)
17:13:44| Generic(non-branded) custpack: No
17:13:44| Allowed languages: en, pb, xl,
17:13:44| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:53| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:53| Custpack: EUROPE_1 (CDA102555/10) (W810)
17:13:53| Generic(non-branded) custpack: No
17:13:53| Allowed languages: en, pt, es, fr,
17:13:53| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:14:26| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:14:26| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:14:26| Generic(non-branded) custpack: Yes
17:14:26| Allowed languages: en, pt, es, fr,
17:14:26| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:14:33|
17:14:33| Sending db2010_cid49red_flash_r2a003.bin...
17:14:33| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:14:33| This is a FLASH loader
17:14:33| Now flashing firmware main...
17:14:33| Flashing c:\documents and settings\jhaeson\escritorio\flash w810i\w810_r4ek001_main_generic_hn_red49\w810_r4ek 001_main_generic_hn_red49.mbn
17:14:33| Header type: BABE
17:14:33| 344 flashblocks
17:17:16| Finishing flash
17:17:16| Done flashing
17:17:16| Now flashing filesystem...
17:17:16| Flashing c:\documents and settings\jhaeson\escritorio\flash w810i\w810_r4ek001_fs_america_2_red49\w810_r4ek001 _fs_america_2_red49.fbn
17:17:16| Header type: BABE
17:17:17| 157 flashblocks
17:18:30| Finishing flash
17:18:31| Done flashing
17:18:31|
17:18:31| Sending db2010_cid49red_cs_r3a010.bin...
17:18:34| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
17:18:34| This is a CHIPSELECT loader
17:18:34| Activating loader...
17:18:34| Activating GDFS...
17:18:57| This loader is UNLOCKED
17:18:57| Success! CS-loader has been unlocked!
17:18:57| Uploading customization files to phone...
17:18:57| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
17:18:57| Activating filesystem
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_PICTURES_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_THEMES_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/GAMES_HOOK_3.itm...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/GAMES_HOOK_3.itm
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/GAMES_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/customize.xml...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/customize.xml
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/customize.xml
17:20:13| Done uploading
17:20:13| Uploading /files_to_upload to phone...
17:20:13| Sending shutdown command to phone...
17:20:13| Customizing was SUCCESSFUL!
17:20:13| Disconnecting phone...
17:20:13| You may now unplug your phone.
17:20:13| Flashing was successful
17:20:15| Disconnected... Unplug the phone

hope this can help you ;)
12-06-2007
Coramoor

Thanks. When and how exactly did you use Far manager? As far as I can read it's for the custom files but seems to your log you are using XS++ to do that? Unless I am misreading it.

I re-flashed the MAIN and it got up and running again but instead of logging in properly after the PIN code has been entered I now get Configuration error please contact your operator...
12-07-2007
beto_nl

A couple of months ago, when I killed my phone, doing i dont know what any more(newbie), I started SEtool2 lite, selected my phone model and hit "FLASH" :

-I didn't add any (rest)file before pressing flash, SEtool detects and uses the rest file by itself ( at least in my case) otherwise you should look for the right rest file.
- It worked on my W800 cid49 red (K750) all patched, I hope it will work for you!!!

so that's what I did then:

1) Open SEtool2 lite
2) Choose your phone model
3) Then press "FLASH" button (without adding any files in any windows), follow instructions, disconnect and..voilá! phone is revived

It worked for me so tell me if it worked for you too!!

Quote:

Originally Posted by Coramoor

Thanks. When and how exactly did you use Far manager? As far as I can read it's for the custom files but seems to your log you are using XS++ to do that? Unless I am misreading it.

I re-flashed the MAIN and it got up and running again but instead of logging in properly after the PIN code has been entered I now get Configuration error please contact your operator...
12-07-2007
Coramoor

Hmm I must say I'm a bit skeptical to involve a 3rd program. The phone is not dead per say but gives a conf. error when started. Would this SEtool2 fix this and make it operational?
12-07-2007
abmadman

dude you just got config error right?
Then cool man you're phone is one step away from coming back! Just download the custpack and install either via FAR or setool.(Cust pack defines ways for your phone to connect/behave in ur region. Hence check that cust pack corresponds the SAME FS u flashed with. I mean a EMEA_4 fs WILL HAVE ITS OWN EMEA_4 custpack)
Although doing it via setool is the easiest way i guess :)
Here are some links:
Customizing using FAR:
[how-to]customizing W810 With Far+sefp - SE-NSE Forums
you will find the link to a custfile library on that thread too :D
(special higlighting to make it wasy for you :))

If you want to cust via Setool2 then visit Index of ./. Its their official site and ahas amazing video tuts.
12-07-2007
devnull9836

When I flashed my w800 (and k750) and got the same error you have Coramoor, then it was because of an error with the FS flashing part. But back then I also used GFlash and SeTool so I don't know if they did the customization correctly for me.
12-07-2007
djape48

Quote:

Originally Posted by Coramoor

Hmm I must say I'm a bit skeptical to involve a 3rd program. The phone is not dead per say but gives a conf. error when started. Would this SEtool2 fix this and make it operational?

Don't be sceptical, many people had same problem (configuration error when phone started after flashing with xs++) and SETool fixed that. beto_nl is telling it right, I fixed my w700 doing same thing month ago :)
12-07-2007
beto_nl

Yes! finally a confirmation, ty djape.

Sometimes things go a bit wrong when you use XS++ specially the older versions ( the version 3.1 works fine though).

SEtool just puts automatically a rest file back to your phone and it usually does the trick unless the damage caused by XS++ was worse than usual.

If it doesnt repair it, at least it wont make it worse.

Anyhow if you are going to use XS++ in the future (i am using it always to delete and upload files to FS), use the version 3.1, it works like a charm with less bugs..

Greetz

Quote:

Originally Posted by djape48

Don't be sceptical, many people had same problem (configuration error when phone started after flashing with xs++) and SETool fixed that. beto_nl is telling it right, I fixed my w700 doing same thing month ago :)
12-07-2007
mayur_dj

hi any1 can send me a step by step precodure for the customizing of my w810i... am using Xs++ 3.1.... please........

17:20:13| Uploading /files_to_upload to phone...
17:20:13| Sending shutdown command to phone...
17:20:13| Customizing was SUCCESSFUL!

can anyone help me with this part, i have been able to do everything except this.....
12-08-2007
abmadman

it says customizing succesful !
Try to switch your phone on now :)
Considering what it says i guess your phone should be working.
12-08-2007
mayur_dj

7:07:59| XS++ v3.1 (Darwin) Ready !
17:07:59| Executed on Microsoft Windows XP
17:08:05|
17:08:05| Attempting to open the interface...
17:08:05|
17:08:05| TURN OFF PHONE!
17:08:05| Hold 'C' button on phone and connect phone NOW.
17:08:05| You have 30 seconds...
17:08:05|
17:08:10| Baseband ID: 8040
17:08:10| Protocol Version: 3.1
17:08:10|
17:08:10| Sending db2010_cid00_prodid_p3l.bin...
17:08:10| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:08:10| This is a PRODUCTION_ID loader
17:08:10| Activating GDFS...
17:08:11| Phone name detected!
17:08:11|
17:08:11| Profiling SEMC phone...
17:08:11| Platform: DB2010
17:08:11| OTP CID: 49
17:08:11| EROM CID: 49
17:08:11| EROM Color: Red
17:08:11| IMEI: 35657401xxxxxx
17:08:11| Phone ID: W810
17:08:11| Region: EUROPE_1
17:08:11| CDA: CDA102295/7 R2A
17:08:11| Firmware Version: R4ED001
17:08:11| EROM: n/a
17:08:11| Ready for operation!
17:08:47| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:08:47| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:08:47| Generic(non-branded) custpack: Yes
17:08:47| Allowed languages: en, pt, es, fr,
17:08:47| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:08:52| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:08:52| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:08:52| Generic(non-branded) custpack: Yes
17:08:52| Allowed languages: en, pt, es, fr,
17:08:52| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:10:30| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:10:30| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:10:30| Generic(non-branded) custpack: Yes
17:10:30| Allowed languages: en, pt, es, fr,
17:10:30| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:03| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:03| Custpack: AMERICA_2 (CDA102494/76) (W810)
17:13:03| Generic(non-branded) custpack: Yes
17:13:03| Allowed languages: en, pb, xl,
17:13:03| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:32| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:32| Custpack: AMERICA_2 (CDA102494/76) (W810)
17:13:32| Generic(non-branded) custpack: Yes
17:13:32| Allowed languages: en, pb, xl,
17:13:32| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:44| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:44| Custpack: AMERICA_2 (CDA102555/107) (W810)
17:13:44| Generic(non-branded) custpack: No
17:13:44| Allowed languages: en, pb, xl,
17:13:44| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:13:53| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:13:53| Custpack: EUROPE_1 (CDA102555/10) (W810)
17:13:53| Generic(non-branded) custpack: No
17:13:53| Allowed languages: en, pt, es, fr,
17:13:53| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:14:26| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
17:14:26| Custpack: EUROPE_1 (CDA102494/108) (W810)
17:14:26| Generic(non-branded) custpack: Yes
17:14:26| Allowed languages: en, pt, es, fr,
17:14:26| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
17:14:33|
17:14:33| Sending db2010_cid49red_flash_r2a003.bin...
17:14:33| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:14:33| This is a FLASH loader
17:14:33| Now flashing firmware main...
17:14:33| Flashing c:\documents and settings\jhaeson\escritorio\flash w810i\w810_r4ek001_main_generic_hn_red49\w810_r4ek 001_main_generic_hn_red49.mbn
17:14:33| Header type: BABE
17:14:33| 344 flashblocks
17:17:16| Finishing flash
17:17:16| Done flashing
17:17:16| Now flashing filesystem...
17:17:16| Flashing c:\documents and settings\jhaeson\escritorio\flash w810i\w810_r4ek001_fs_america_2_red49\w810_r4ek001 _fs_america_2_red49.fbn
17:17:16| Header type: BABE
17:17:17| 157 flashblocks
17:18:30| Finishing flash
17:18:31| Done flashing
17:18:31|
17:18:31| Sending db2010_cid49red_cs_r3a010.bin...
17:18:34| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
17:18:34| This is a CHIPSELECT loader
17:18:34| Activating loader...
17:18:34| Activating GDFS...
17:18:57| This loader is UNLOCKED
17:18:57| Success! CS-loader has been unlocked!
17:18:57| Uploading customization files to phone...
17:18:57| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
17:18:57| Activating filesystem
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_PICTURES_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_PICTURES_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_THEMES_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_THEMES_HOOK_3.itm
17:20:12| Done uploading
17:20:12| Uploading /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm...
17:20:12| Creating directory /tpa
17:20:12| Creating directory /tpa/preset
17:20:12| Creating directory /tpa/preset/custom
17:20:12| Deleting file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
17:20:12| Deleted...OK!
17:20:12| Uploading file /tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/GAMES_HOOK_3.itm...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/GAMES_HOOK_3.itm
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/GAMES_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
17:20:13| Done uploading
17:20:13| Uploading /tpa/preset/custom/customize.xml...
17:20:13| Creating directory /tpa
17:20:13| Creating directory /tpa/preset
17:20:13| Creating directory /tpa/preset/custom
17:20:13| Deleting file /tpa/preset/custom/customize.xml
17:20:13| Deleted...OK!
17:20:13| Uploading file /tpa/preset/custom/customize.xml
17:20:13| Done uploading
17:20:13| Uploading /files_to_upload to phone...
17:20:13| Sending shutdown command to phone...
17:20:13| Customizing was SUCCESSFUL!
17:20:13| Disconnecting phone...
17:20:13| You may now unplug your phone.
17:20:13| Flashing was successful
17:20:15| Disconnected... Unplug the phone

i have been able to do everything above except the one in red.... i dont know how to start the uploading in XS++ v3
12-08-2007
abmadman

go to the directory where XS++ exists (you will find XS++.exe and XS++log also there) and add the folder files_to_upload.
Paste your custom files folder there in UNCOMPRESSED FORM(ie without zip or rar) and i guess since you wouldve downloaded the pack it would have the correct folder automatically (folder order being \tpa\preset\custom i THINK)
in xs++ select customization and the select own pack and you will find your files there.
12-08-2007
mayur_dj

ok i will try it and let you know stay online
hey i cant find my ownpack..... i have CDA102555/16..... why is this the case
12-08-2007
abmadman

i guess you can use that too.. try it!
12-08-2007
mayur_dj

nah not working.... me going to leave my mobile to get repared... am fed up... but the prob i that they will again put a branded firmware
12-08-2007
abmadman

try setool if you want .. its also very easy
visit http://www.setool.net .. its the official forum.. they have good tutorial videos.
12-08-2007
mayur_dj

hi i got my mobile debrand from my mobile shop, but at home when i try to add flash menu to it, it just dont switch off again... can you giv any help...
12-08-2007
abmadman

i dint quite get the problem! your phone does not switch off?
do the menus work? how did you upload them?
12-08-2007
mayur_dj

sorry it didin't switched on.... it was working before i do the FSX... i was using XS++ 1..... am trying with XS++ 3.1 now... hope it will work,, i think i have erased the generic