I flashed a CID49 W810i with XS++ with below stated files and it was successfully except the last custom files wouldn't finish properly. The phone is dead and can't be started at all now. I've looked at tons of threads but can't figure it out. Anyone who can tell me where I did wrong and how I can solve it? Thank you.

W810_R4DB005_MAIN_GENERIC_HN_RED49.mbn
W810_R4DB005_FS_EUROPE_4_RED49.fbn
W810_CDA102555_13_R2A_Generic_EUROPE_4

My process so far:
Ready for operation!
23:45:20| Sending loaders\db2010_cid49red_flash_r2a003.bin...
23:45:21| This is a FLASH loader
23:45:21| ***** Read flash vendor & id (cmd 0D)
23:45:21| ***** Read otp (cmd 24)
23:45:21| +++ Now flashing firmware main...
23:45:21| Sending flashfile C:\Program Files\XS++\W810_R4DB005_MAIN_GENERIC_HN_RED49.mbn
23:45:21| 343 flashblocks
23:48:07| Finishing flash
23:48:07| Done flashing
23:48:07| ++ Flashing was successful
23:48:09| Disconnected... Unplug the phone
23:49:10| Attempting to open the interface...

23:51:30| Ready for operation!
23:51:43| Sending loaders\db2010_cid49red_flash_r2a003.bin...
23:51:43| This is a FLASH loader
23:51:43| ***** Read flash vendor & id (cmd 0D)
23:51:43| ***** Read otp (cmd 24)
23:51:43| +++ Now flashing filesystem...
23:51:43| Sending flashfile C:\Program Files\XS++\W810_R4DB005_FS_EUROPE_4_RED49.fbn
23:51:43| 161 flashblocks
23:53:00| Finishing flash
23:53:01| Done flashing
23:53:01| ++ Flashing was successful
23:53:03| Disconnected... Unplug the phone
23:56:29| Attempting to open the interface...

00:25:21| Ready for operation!
00:26:06| +++ Flashing breakin...
00:26:06| Sending loaders\db2010_cid49red_flash_r2a003.bin...
00:26:07| This is a FLASH loader
00:26:07| ***** Read flash vendor & id (cmd 0D)
00:26:07| ***** Read otp (cmd 24)
00:26:07| Sending flashfile loaders\W810.bin
00:26:07| 5 flashblocks
00:26:09| Done flashing
00:26:09|
00:26:09| Disconnect phone from USB-port and wait for
00:26:09| further instructions.
00:26:09| You have 10 seconds.
00:26:09|
00:26:19| Open the battery-cover and reinsert the battery.
00:26:19| Hold C Button on phone and connect phone again.
00:26:19| You have 30 seconds.
00:26:19|
00:26:28| Baseband ID: 8040
00:26:28| Hardware Platform: db2010 Marita compact
00:26:28| Protocol Version: 3.1
00:26:28| +++ Phone has restarted successfully...
00:26:29| This is a PRODUCTION_ID loader
00:26:29| Sending loaders\db2010_cid49brown_cs_v26.bin...
00:26:30| Binary acknowledge failed with: 89
00:26:30| Failed sending datachunk
00:26:31| Failed sending header: 0x00
00:26:31| Error: FSX failed.
00:26:31| ++ Error: FSX failed
00:26:33| Disconnected... Unplug the phone
00:28:04| Shutting down...