Printable View
Ive seen through the forum and i am familiar with flashing my phone, i have both xs++ and SETools 2 Lite, but when i get to the part where it says hold C and connect, the screen just stays white and my pc does not have any reaction,basically my pc doesn't "see" my W550. Im not sure if i am doing the right thing, please anyone help, it would even be better and much easier if anyone wants to help by msn or skype.
Have you installed the USB-Flashdrivers?
you have to turn off your phone, before connecting it to your PC.
1. Turn Off Your phone, disconnect the cable
2. start the program, proceed to place, where it says to hold C
3. Press and Hold "C"
4. Connect the cable.
i know how to do that, i have downloaded 2 usb drivers for my w550, but i placed them on my desktop, is that ok? so basically i need help in making my computer recognize my cell. any suggestions?
1. Turn off phone.
2. Hold "C" and connect with USB , then click :
http://img265.imageshack.us/img265/8918/01zr8.th.jpg
nothings happening rite now, do i have to restart pc or smthn to work? and do ihave to keep holding the c button? can u give me ur msn, so it would be easier?
ok so when i check my device manager, there are 2 unknown devices, 1 multimedia audio controller, 2 PCI simple communications controller
Turn off phone and wait 30 sec.Quote:
Originally Posted by baxhimself
Start XS and click Connect , hold "C" then connect with USB cable.
if not,,, change your usb cable, make it orig.
Try copying it into Windows\System32 and also try after removing battery and putting it back....Quote:
Originally Posted by baxhimself
hizzzzzzzzzzzz
rattlesnake
Check This Step By StepQuote:
Originally Posted by baxhimself
1. Check Your Battry Fully Charged.
2. Check Your USB Cable.
3. First One Time Take Out Battry And Replace it.
4. Hold C Botton And Connect The USB Cable.
5.Go To Control Panel --> System --> Device Manager
6. Find USB Bus Controller
7. Right Click On New USB Flash Device (Maybe Unknown Device) Finded And Click Update Driver
8. Then Browse Your USB FLASH Driver On your Computer And Install It.
9. Now You Can Flash Your Phone !!!
Any Question ?
download and run
4shared.com - online file sharing and storage - download gg-setup.exe
it automatically installs the needed drivers
make sure u Take Out Battry for a few secs And then Put it back in it, check ur cable is pluged in properly, and connect holding down C
reboot the compter till your usb is recognised by compter, if not recognised remove any usb driver pertaining to usb cable reboot and install usb driver freshly by connecting usb, xs++ will install automatically, try this on recognition u can go further.
This happened to me, what I did was I took off the baterry for a night, and the next day I set everything ready and I chose my model (w600), then 30 seconds befor I hold the c key after 30 seconds I click "identify"(setools 1.08) and I conected, and I let it go once it recognized. I recomend you do this, but if you have a cingular phone you may have some dificulties because I could not flash my phone.
You said you know about flashing phone, but you didn't say what cable you are using to connect your phone?Quote:
Originally Posted by baxhimself