DB 2020 tunning!

It is in this section, because You mustn't use PhoneXS with DB2020 ;)

K800, W850 or W880 are most popular now, so this thread can help a lot of people... ;)

What we need?

FAR with DB2020 CID49/51/52 support - look here: DOWNLOAD

daVinci for check Your's CID: DOWNLOAD

First, check Your CID using daVinci. Turn off the phone, turn on daVinci, press Read CID/Test cable and connect Your SE with "C" - on the left You will see Your CID.

Turn on FAR Manager, press F11 and take SEFP 0.10.0.51:

http://img129.imageshack.us/img129/8...board01do4.jpg

Take DCU-60 in Device, 921600 in Speed and Your's CID in Boot script. Mine is 52:

http://img338.imageshack.us/img338/3...board01ck6.jpg

If all is good, press Enter the matrix. Then the loader will works. If all will be loaded, take FS [in DB2020 You can't go to FLASH]. Now You can change some files what You won't :) for example:

camera driver: ifs/settings/camera
acoustic: ifs/settings/acoustic
menu: tpa/preset/system/menu
layout: tpa/preset/layout [i don't know exactly]
font: tpa/preset/system/fonts

If You will finish copy Your new files, come back with ".." to main folders - e.g ifs, tpa, QUEUE... Then once again press dots ("..") and take YES if the question about shut down loader will appear.

Turn on the phone and be happy with Your modded DB2020! :)

10x for the instructions

Can i copy the FS files from Cellphone to PC？

not yet...

in db2020 i think that's impossible to copy from phone to pc

not impossible 2 copy files from FS u can use a .xml file called default_upgrade.xml

so we can copy to the fone, just not back from the fone to the computer? do you need to flash a fake main like with the W810 method?

no you don't...far dose it all.....you only have to connect, copy the files needed in phone then shut down loader and then you can turn on the phone....here you go...modded phone...much easier then break into it....the only inconvenient: you cannot copy files from phone so no backup :( but you can find decompiled fs so it is ok....or you can decompile fs yourself :D

This is a very helpful post. I've trying to find modding a K800 using FAR..thanks! and hope that you can find someway of extracting files from FS...

no. if you want to see a structure of fs you must:
download your fs from the topsony (for example) then convert with main2raw and then unpack with SEFStool4...

just get an extracted files directories , and use no bruteforce customizing methode with customize_upgrade.xml with default upgrade generator program
and upload the file at tpa/preset/custom
you will have all your wanted file
tested i think it work fine

can someone clarify me that they have already done this with K810?!

K800, db2020, cid52...

it's possible to delete file camerashutter.3gp in tpa/preset/system/sound ? or replace with empty silent file ?


and what's this > camerashutter_rer.3gp ?


thnx

I can connect with my phone .
But I can't see FS flie. Why ?
my phones is k550 CID52 .

Quote:

---

Originally Posted by patrix242

K800, db2020, cid52...

it's possible to delete file camerashutter.3gp in tpa/preset/system/sound ? or replace with empty silent file ?


and what's this > camerashutter_rer.3gp ?


thnx

---

try here
/tpa/preset/system/sound/camerashutter4.3gp
/tpa/preset/system/sound/camerashutter4_rer.3gp

thankyou for the topic.

you can delete camera shutters for example with far manager and plugin...

thx for the topic

where i will find some nice camera shuttters
?

Quote:

---

Originally Posted by patrix242

K800, db2020, cid52...

it's possible to delete file camerashutter.3gp in tpa/preset/system/sound ? or replace with empty silent file ?


and what's this > camerashutter_rer.3gp ?


thnx

---

when you want to make photos without sound, just turn your phone to silent mode, and you camera won't make a sound ;-)

Thanks for the notes above, they'll help a lot of guys. My phone is a Cid 52 K800i running on R1KG001. I've been able to mod my phone since the Cid 52 plugin for Far manager came out. I've changed my menu and layout files many times without a hitch until this week.

Problem is that now when I plug in the cable while C is pressed, detection of the phone always stops at the file system server startup stage just before the GDFS activation. I try closing Far and disconnecting the phone several times and trying again but nothing.

On reading the log that's created, it shows that everything runs fine till then where there's a timeout. It will now only connect when I perform a master reset (lose all my data, apps, etc !!!!) then try and connect. It then connects as usual on the first try but the layout files in tpa/system/layout are all deleted. Custom menu files and icons however remain intact.

Somebody please help, I'd really like to have this sorted. I'm worried for my phone. R1KG001 is so damn unstable!!

Thanks in advance.

Thanks for this ive been looking for far for db2020 for ages now just wondering how do people extract file systems from db2020?? it has been done as i can download W660i db2020 file sytem files just wondering if far can do it with plugins or anything?
thanks again

And what about patching?

Okay... I have a CID52 w580i and I want to upload a flash menu. I did all that was sayd in the first post and it worked. I want to upload a file from c:/flash to the phones directory for flash menus. I navigated there and then I dragged the file from the PC to my phone... now it asks this:
http://img513.imageshack.us/img513/7352/far1mx2.jpg

What should I do?

THX in advance :)

Press "Copy"

Ok thx, I was not sure if I should fill out the path again :)

Ok bit of a stupid question can i upload using far and how do i because i normally use phone xs+ but to save time i want to use far so i dont have to dissconnect and reconnect to phone xs+ and then upload if anyone know where a tut or somthing might be please give a link or somthing and p.s i have tryed search with no luck thanks

Its ok guys i figured it out what a idoit i am just drag files across cant belive i could'nt figure that out

it recognizes the w200?

I think top sony got spamed lol

Quote:

---

Originally Posted by addict26

Okay... I have a CID52 w580i and I want to upload a flash menu. I did all that was sayd in the first post and it worked. I want to upload a file from c:/flash to the phones directory for flash menus. I navigated there and then I dragged the file from the PC to my phone... now it asks this:
http://img513.imageshack.us/img513/7352/far1mx2.jpg

What should I do?

THX in advance :)

---

I too did this but used the SWF files that came with XS++ and it is taking what seems like forever and is stuck on 70 percent. Now what?

can we find .vkp f ile in far