Phone not booting up!!! Help!

Printable View

03-14-2007
mr.sovereign

Phone not booting up!!! Help!

hey all u geniuses out there.. last nite i wanted to install some menu files so 1st i did wat my fellow buddies on the forum told me to do... i.e i downloaded db2010cid49_3_3.rar.zip and extracted the w300_p3k_dcu.49R.ss in the FAR directory... i'm usin a w300i so... then i opened xs++ and conneected the phone.. it all did well.. den i chose the w300_p3k_dcu.49R.s (MAIN) file to break in as told to me... then as said it flashed 5 blocks... waited it didint end so i manually choose 'STOP'... (as directed).. then i disconnected the phone... and NOW... THE PHONE ISN'T BOOTING UP!!!!!!!!!!!! where have i gone wrong? or still somethin's remaining??? HELP NEEDED GUYS.... !!
here's the log..

---------------------------------------------------------------------------
0:42:08| XS++ v1.2 Ready !
00:42:17| Attempting to open the interface...
00:42:17| ++++++++++++++++++++++++++++++++++
00:42:17| Turn off phone
00:42:17| Hold C Button on phone and connect phone.
00:42:17| You have 30 seconds.
00:42:17| ++++++++++++++++++++++++++++++++++
00:42:22| PORT STATUS: ACTIVE
00:42:22| Baseband ID: 8040
00:42:22| Hardware Platform: db2010 Marita compact
00:42:22| Protocol Version: 3.1
00:42:22| Sending loaders\db2010_cid00_prodid_p3k.bin...
00:42:22| This is a PRODUCTION_ID loader
00:42:22| Activating GDFS...
00:42:23| phone name detected
00:42:23| ++++++++++++++++++++++++++++++++++
00:42:23| PHONE INFO
00:42:23| ++++++++++++++++++++++++++++++++++
00:42:23| DBID: db2010
00:42:23| OTP CID: 49
00:42:23| EROM CID: 49
00:42:23| EROM color: Red
00:42:23| IMEI: 35998800xxxxxx
00:42:23| Phone: W300
00:42:23| Operator: S_ASIA_LEVAN
00:42:24| CDA: CDA102665/110 R2A
00:42:24| Firmware: R9A036
00:42:24| EROM: n/a
00:42:24| ++++++++++++++++++++++++++++++++++
00:42:24| Ready for operation!
00:43:17| Sending loaders\db2010_cid49red_flash_r2a003.bin...
00:43:17| This is a FLASH loader
00:43:17| +++ Now flashing firmware main...
00:43:17| Sending flashfile C:\Program Files\Far\Plugins\w300_p3k_dcu.49R.ssw
00:43:18| 5 flashblocks
00:43:20| Finishing flash
00:45:30| ++ Error: Flashing failed
00:45:30| Disconnected... Unplug the phone
------------------------------------------------------------------------
03-14-2007
rockybhai

Download the 1st main file from here http://www.topsony.com/forum/local_links.php?catid=263

connect ur fone with xs++ in flash main select the file downloaded and flash it .It will turn on .

the problem is caused because u don't hv to us breakin method in xs++ .The software does it automatically all u hv to do is simple uplod any patch any file u hv to then simple reflash the main file and it's done Simple...;)
03-14-2007
ThE_MaStEr

Hi.

Yes this should work.

T.M.
03-14-2007
Magicnet2

Yeah, this XS++ procedure is good, if he doesn't want to install the menus, but if he wanna do the menu mods, then using far is better. After flashing breakin, use far to do modds and then flash the rest file. Its faster than to flash the whole fw with XS++. the whole fw takes several minutes, the rest with Far only about 2-3 seconds.
03-15-2007
rafox

But this SEFP method can damage the phone if it is used a lot...
I sugest you to download the Gslide patches, then u can change everything without this stuff...
03-16-2007
Magicnet2

Quote:

Originally Posted by rafox

But this SEFP method can damage the phone if it is used a lot...
I sugest you to download the Gslide patches, then u can change everything without this stuff...

Well, I use the SEFP method a LOT, several times a day and haven't damaged the phone in any way. The thing is: you cannot damage the phone when flashing. I mean the hardware. The only thing you cam damage is the software and that can be easily repaired = reflashed.
03-17-2007
seyediali4

Quote:

Originally Posted by Magicnet2

Well, I use the SEFP method a LOT, several times a day and haven't damaged the phone in any way. The thing is: you cannot damage the phone when flashing. I mean the hardware. The only thing you cam damage is the software and that can be easily repaired = reflashed.

if you Beginner may be damage to the hardware of phone.
so you should learn about flashing mobile and help of other user.
03-20-2007
Heshamborhan

Quote:

Originally Posted by rafox

But this SEFP method can damage the phone if it is used a lot...
I sugest you to download the Gslide patches, then u can change everything without this stuff...

really..?? what kind of damage..? i use the SEFP too, coz Gslide make my phone firmware damage.. LOL
04-04-2007
Lunks

I wish I could use far to send vkp patches =P
No, you can't damage your phone at all.
04-07-2007
connah

no you cant attach vkp patches using far manager
04-07-2007
tanmoy89

how to use vkp pathes using far manager? i use gslide for vkp pathes but it would be cool with far
04-08-2007
connah

sefp will not damage your phone unless done wrongly! follow directions and your safe!
04-09-2007
moedjs

Quote:

Originally Posted by tanmoy89

how to use vkp pathes using far manager? i use gslide for vkp pathes but it would be cool with far

the same as when you flash MAIN or FS firmware to your phone .. SEFP will recognize the .vkp ext and ask you wheter to run or remove the patch ...
04-13-2007
Vinzend

gslide is better..if u using correct header and patches every thing will okay..
02-20-2008
herbert23

sir u seem to be a expert in this forum i will test ur skills i unlocked a w300i with cruiser 6 months ago and i tryed every thing possible cruiser says erom damaged this seems pretty bad, but now the phone is dead i had to buy this fone from customer so now its mine i want to fix it if anyone think they can help me repair this heres my e-mail anyone is welcome to try to help its herbie_yee@hotmail.com and type me a message about w300i please i paid alot for this 16,000ja dollars