Problem with XS++...HELP!

Hi..I'm trying to flash my w600i RED49 with XS++ using dcu-60 usb cable with W600_R7CA017_MAIN_NAM_1_RED49.mbn for the Main Flash and W600_R7CA017_FS_AMERICA_1_RED49.fbn for the File System. :(

Flashing Main Firmware is no problem..its done successfully..but when its time flashing firmware at 114 blocks it gave me this warning..." Failed sending flashblock 130. Returnvalue 0x45 "..:mad:

Now my phone cannot be switch on..But I know its not dead yet because I can still access through FarManager. I can see all the FS and FLASH and can access FS with no problem...And now searching whether I can save the phone via FarManager...:confused:

Anyone outhere can help me on this whether using FarManager or XS++ to "resurrect" back my phone?..Thanks a Lot...:o


Here is the Log for one of the activity captured..

11:47:07| Turn off phone
11:47:07| Hold C Button on phone and connect phone.
11:47:07| You have 30 seconds.
11:47:07| ++++++++++++++++++++++++++++++++++
11:47:12| PORT STATUS: ACTIVE
11:47:12| Baseband ID: 8040
11:47:12| Hardware Platform: db2010 Marita compact
11:47:12| Protocol Version: 3.1
11:47:12| Sending loaders\db2010_cid00_prodid_p3k.bin...
11:47:12| This is a PRODUCTION_ID loader
11:47:12| Activating GDFS...
11:47:13| phone name detected
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| PHONE INFO
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| DBID: db2010
11:47:13| OTP CID: 49
11:47:13| EROM CID: 49
11:47:13| EROM color: Red
11:47:13| IMEI: 35744500xxxxxx
11:47:13| Phone: W600
11:47:13| Operator: AMERICA_1
11:47:13| CDA: CDA102453_120905 120905
11:47:13| Firmware: R7CA017
11:47:13| EROM: n/a
11:47:13| ++++++++++++++++++++++++++++++++++
11:47:13| Ready for operation!
11:47:51| Sending loaders\db2010_cid49red_flash_r2a003.bin...
11:47:52| This is a FLASH loader
11:47:52| +++ Now flashing firmware main...
11:47:52| Sending flashfile D:\SonyEricssonThingy\Others_fs_mf\W300i_R9A036_MA IN_GENERIC_JE_RED49.mbn
11:47:52| 336 flashblocks
11:54:02| Finishing flash
11:54:04| Done flashing
11:54:04| +++ Now flashing filesystem...
11:54:04| Sending flashfile D:\SonyEricssonThingy\Others_fs_mf\W300i_R9A036_FS _EUROPE_2_RED49.fbn
11:54:04| 161 flashblocks
11:56:19| Failed sending flashblock 130. Returnvalue 0x45
11:56:19| Finishing flash
12:00:08| +++ Sendinging shutdown signal to phone...
12:00:10| Shutting down...

Try it with another Firmware!

Hai Your phone is detected by FAR. So Try to Flash your phone using FAR Manager.

SEUS would be good too. :))
Or try, as *Eddy87* said -> try different FW.

GL

try using phone xc v6 command line

rename flash file to fs-flash.bin
main file to main-flash.bin

select flash.bat and then it starts flashing

after flashing donot start phone

download custom files and copy them in files_to_phone folder

then select finalize.bat

its easy i done it before

Quote:

---

Originally Posted by raj_s_007

Hai Your phone is detected by FAR. So Try to Flash your phone using FAR Manager.

---

far manager is an filemanager or not?!?

can i flash my k510i with far too??

Quote:

---

Originally Posted by splitter11

far manager is an filemanager or not?!?

can i flash my k510i with far too??

---

yes, but with plugin caled SEFP we can get access to FS firmware stored in phone

proably yes, but try to use XS or Phone XS+ and FAR only for customization.

regards

i just try to flash my k510i with phone xs.

but it doesn´t work.

so i will try with far.

how can i flash it with far?

what files i need?

*splitter11* To use your phone with FAR, you need FAR plugin, called SEFP.
Search the forum - it sould be there, and phone needs to be flashed with special MAIN, included in plugin (use XS++).


GL

Quote:

---

Originally Posted by miltank

*splitter11* To use your phone with FAR, you need FAR plugin, called SEFP.
Search the forum - it sould be there, and phone needs to be flashed with special MAIN, included in plugin (use XS++).


GL

---

i´ve just SEPF an far manager too.

where can i find this special MAIN ?