w200 error not unlock
Printable View
w200 error not unlock
Simox, thanks for the link, anas sorry to be late, but I did not receive notify by email for replies of the thread.
that tutorial doesnt replies all of my questions.
please read my quoted post again and try to reply ifd possible, I'm not that newbie, so, dont reply as if I was one ;), just that there are doubts :)
Quote:
Originally Posted by simox
I see, that post doesn't have much sense, sorry...Quote:
Originally Posted by yurais
First upgrade the CID with XS++. It will ask you if you want to upgrade the CID, so press yes. Now you need a CID52 MAIN firmware to generate an unlock patch. Then follow that tutorial to apply the generated patch.
does any body have the firmware for a w850i RJ1C002 ??
thanks for any help
Didnīt work with w580i.. Anyone had it working with w580i ? I need to unlock to use another SIM from other OP.
it is locked to voda i guess now as when i put in orand or o2 it said inactive sim
please help me simox
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801726461 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801726461 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDRB2020_PRELOADER_FOR_SETOOL2
LDRB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Del\My Documents\mobile phone unlocking tools firmwear\unlocking sony k800i\K800_R1JC002_MAIN_VODAFONE_WI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Del\My Documents\mobile phone unlocking tools firmwear\unlocking sony k800i\Remove_SIM_lock_K800_R1JC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:596 secs.
anyone about to help me please
thankyou del
This patch does work.
However it has to accompany with SETool2 and XS++ to make your phone unlock, at least it worked on my K610i locked by UK 3.
In order to generate the correct patch, you will have to find the right MAIN firmware. To me, this could be the most difficult part since I decided not to spend a penny to get the phone unlock.
what about DB2010 ? does it work on those phones?
yes it does IF the phone is db2010 CID49
I just unlocked Z610i. Updated to CID52 with XS++, then applied patch with SETool2 Lite v1.11.
I've flashed the phone with R6DA001:
Z610_R6DA001_MAIN_GENERIC_MY_RED52.mbn
but for FS I found just Z610_R6DA001_FS_C_ASIA_RED52.fbn , so after customizing, I've english only...
So I'm looking for:
Z610_R1KH001_FS_EUROPE_2_RED52.fbn
or
Z610_R6DA001_FS_EUROPE_2_RED52.fbn
P.S. I'm unable to unlock W200i (CID52). At the end, it says:
Starting to process VKP patch script: \\Pc1\pc1-mis documentos\SIMLockPachGen1.1\vkp\Remove_SIM_lock_W 200_R4GB001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:8 secs."???
With XS++ I can't flash/customize this phone, so I've tried to do everything with setool2 Lite...
Any suggestions?
use xs3.1Darwin and it will work, or flash with jdflasher
Excuse me for late reply.Quote:
Originally Posted by del12
The problem is that your phone isn't locked... inactive sim means that there is a problem with network, or the phone's IMEI is blacklisted, or there is a problem with sim card.
Try to set your phone to GSM only(Settings->Connectivity->Data comm.->Preferred service->GSM only), then restart the phone a couple of times.
You can try to remove the SIM card, restart the phone, then put back the SIM and start the phone again.
If it doesn't works the only option left is that contact the service provider for further help...
Mocko:
You cannot unlock W200 phones for free...
Is necessary to have *.mbn file to can unlock the phone ( i have K800i locket to Orange in UK and i am trying to unlock it )
Please help me
Yes it is necessary. Generate an unlock patch, and apply it with SETool2 Lite. Here is how to do it: How to apply patches with SETool2 Lite V1.11.
this is the file what i need to generate tha patch, right?
K800_R1JC002_MAIN_ORANGE_WI_RED52?
when the patch will be generated, can i write without flashing the phone?
Yes, that is the file... No need to flash the phone before applying the patch, but you need to follow the tutorial.
I read the tutorial, but i cant understand something, can i post about it and unlocking k800 here or not?
thanks
If you don't understand something just ask. No need to ask for permission ;)
OK, Thank
Here is the log of my phone:
01:52:49| XS++ v3.1 (Darwin) Ready !
01:52:49| Executed on Microsoft Windows XP
01:52:53|
01:52:53| Attempting to open the interface...
01:52:53|
01:52:53| TURN OFF PHONE!
01:52:53| Hold 'C' button on phone and connect phone NOW.
01:52:53| You have 30 seconds...
01:52:53|
01:52:57| Baseband ID: 9900
01:52:57| Protocol Version: 3.1
01:52:57| Phone name detected!
01:52:57|
01:52:57| Profiling SEMC phone...
01:52:57| Platform: DB2020
01:52:57| OTP CID: 51
01:52:57| EROM CID: 52
01:52:57| EROM Color: Red
01:52:57| IMEI: 35908701xxxxxx
01:52:57| Phone ID: K800
01:52:57| Region: ORANGE_GEN
01:52:57| CDA: CDA102511/47 R21A
01:52:57| Firmware Version: R1JC002
01:52:57| EROM: R3A022
01:52:57| Ready for operation!
and i have this files:
K800_R1JC002_MAIN_ORANGE_RED52.mbn
K800_R1JC002_FS_ORANGE_GEN_RED52.fbn
Can i use this files to Flash and unlock my phone?
thanks again
Yes, you can use those files...
BIG THANKS to simox, i have unlocked my K800i
Every time I try to apply the Simox unlock patch I receive the following error.
New block #0000 added: $45100000
Blocks selected OK. Reading blocks: 1
Block @ $45100000 read error. Have only: 00000000 bytes
or
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Can you assist so that I can remove the Network lock?
did you bypass-ed db2020 security?
guesss not, so that is your problem. use setool 1.10 at least (or 1.11 if you want more than one patch)
Do you use SETool2 Lite v1.11? The phone's EROM CID is 52? Do you follow one of DB2020 patching tutorials?
I read over the tutorials and the patch gave the following:
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\SOny Ericsson W610\SeTool 2 Lite 1.11_ with_video_tutorials\setool2lite_db2020\qamaker\qu ick_access_W610_R6BC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45A80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:3281 secs.
But when I insert another carrier sim card i get "Insert correct Sim card"
hmm?? any ideas
meybe you(sprangga) trying to apply wrong patch...It is for your firmware which you flashing via setool??
You need to apply the unlock patch as well. Here is how to do:Quote:
But when I insert another carrier sim card i get "Insert correct Sim card"
hmm?? any ideas
Quote:
Originally Posted by simox
Yes I am tryiing to unlock my phone with my firmware! I cannot see it being the wrong patch as i dragged the firmware main over the qmaker file and it generated the vkp file.
hmm
ok Simox, now leaving work, will try it later and post the results! thanks for the help and patience with me so far!
You didn't understood me. The qameker WILL NOT unlock your phone. It is for speed up the further patching. It is all ok what you did, but you need to do the following as well:
1.) First generate an unlock patch. Download my tool from first post of this thread(use the latest version 2.1). Run my tool, select the MAIN firmware and press Make patch button.
2.) In SETool2 Lite select your phone type, tick 'Use "quick access" patch' checkbox, select the generated unlock patch(Remove_SIM_lock_XXX_XXXXXXX.vkp) in Misc files and click Write SCRIPT button.
If you do this, your phone will be unlocked...
Success AT LAST!!
Thanks SIMOX ! thanks so much! I finally understand the entire process end to end!
And I have the other carrier sim working in the w610!
Ok im trying to unlock my k800i locked to 3 but you say i need this
K800_R8BA024_MAIN_GENERIC_WI _RED52.mbnQuote:
Originally Posted by simox
ok, so you put the quick access. Now you need to put the unlock patch generated by my tool:
First generate an unlock patch. Run my tool, select the MAIN firmware(K800_R8BA024_MAIN_GENERIC_WI _RED52.mbn) and press Make patch button.
In SETool2 Lite select your phone type, tick 'Use "quick access" patch' checkbox, select the generated unlock patch(Remove_SIM_lock_K800_R8BA024.vkp) in Misc files and click Write SCRIPT button
Where do i get that. download link?
every time i try to unlock my w850 i got similare message : Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
why ??
try to patch with jdflasher
Baseband ID: 9900
23:10:19| Protocol Version: 3.1
23:10:19| Phone name detected!
23:10:19|
23:10:19| Profiling SEMC phone...
23:10:19| Platform: DB2020
23:10:19| OTP CID: 51
23:10:19| EROM CID: 52
23:10:19| EROM Color: Red
23:10:19| IMEI: 35908701xxxxxx
23:10:19| Phone ID: K800
23:10:19| Region: EUROPE_2
23:10:19| CDA: CDA102511/187 R3A
23:10:19| Firmware Version: R1KG001
23:10:19| EROM: R3A022
23:10:19| Ready for operation!
Simox, can you help me to find the right firmware for my mobile ?
I have download more firmware (e.g. : K800_R1KG001_MAIN_GENERIC_WI_RED52.mbn, or K800_R1KG001_MAIN_GENERIC_WI_RED52_for_Vodafon.mbn , ...) , but that not right firmware for my mobile,
thanks you, simox
the main that u downloaded flash him with xs++, than make patch using main that u patched, and than apply patch
Read this: How to get access to Download Area?Quote:
Originally Posted by eraldo
I cannot give you links because it is against the forum rules, but you can search for it on internet...
xulos:
I think you made something wrong. Did you followed any tutorial? Please give us more information.Quote:
every time i try to unlock my w850 i got similare message : Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
why ??
feuer:
That firmware is the right one for your phone;). Why you think that it isn't good? Do you want to flash your phone or you want to unlock it?Quote:
Simox, can you help me to find the right firmware for my mobile ?
I have download more firmware (e.g. : K800_R1KG001_MAIN_GENERIC_WI_RED52.mbn, or K800_R1KG001_MAIN_GENERIC_WI_RED52_for_Vodafon.mbn , ...) , but that not right firmware for my mobile,
thanks you, simox
Xulos: I've got a w850 as well. It tended to happen to me when flashing the main with XS++ and then applying the patch with SETool. This went away when I started doing it all in SETool. Worked in FAR as well.
aha so iv got to wait 2 months before i can attempt to unlock my phone... nice...
Played around with it on a friends k750, and worked fine. Got usb-smart but 15-30 minutes with flashing/reading codes compared to 2minutes patching it makes it a well worth tool.
Simox:
That firmware is the right one for your phone;). Why you think that it isn't good? Do you want to flash your phone or you want to unlock it?[/QUOTE]
I want unlock my phone, but when i start to write Script, then
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:42 secs.
why ????????
what is wrong ?
can you help me, pleaser
thanks you.