Did you follow every step of B. How to apply the generated patches to DB2020 CID52 phones ?
In order to apply patches you must first apply "quick access patch".
Did you follow every step of B. How to apply the generated patches to DB2020 CID52 phones ?
In order to apply patches you must first apply "quick access patch".
i do that but 15 sec wait n then seetool say unplug phone flashed error :(
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 0/E
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Elapsed:4 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401820425 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Microsoft\Desktop\quick_access_K810_R8BA0 24.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:56 secs.
Abort all operations.
Can't load ID loader !
Elapsed:2 secs.
RECOVERY MODE STARTED
Abort all operations.
Elapsed:4 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
well, that's not the right way to apply quick access patch.Quote:
Originally Posted by laraib
Start setool2lite v1.11, select model, tick Bypass DB2020 Security, add the main firmware and in the Misc ... select the quick access patch file. click the Flash button, wait for instruction on the setool log window and so as instruction. i hope you'll successfully apply quick access patch. to apply patch after quick access patch successful, unplug cable, reinsert battery, now tick the "Use quick access patch", on the misc ... select the patch file and click on the "Write script" and do as instructed. please post result
I keep getting flash error and can not remove network limitations as it dose not register my 02 sim
hi am new to phone unlocking all i want is my w660i on o2 NOT HUTCHINSON'S 3G !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! lol
i am competent comp user i soft-mod games consoles not phones lol
anyway here is my problem
i have so far flashed my phone with xs++ and mainly setool2 1.11
i am SORT OF sure that QA patch worked but don't no how 2 check
i can not find custom pack for my exact original firm main so i tried to flash with genetic firm
and then patched what i think was successfully simunlock patch but not successful when i turn phone on anyway here is phone details as my phone stands now will leave all alone until some very help-full person reply's
could some one also write what firm main firm fs an custom pack i should try for my phone
original firm main was (W660_R6BC002_MAIN_HUTCHISON_FY_RED52)
original firm fs was (W660_R6BC002_FS_HUTCH_1_RED52)
and cda (W660i_CDA102804_46_R14A_3_United_Kingdom)
stats from setool2 1.11
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501257531 CERT:RED
FLASH CID:52 COLOR:RED
Model:W660i
MAPP CXC article: R6BC002 prgCXC1250446_GENERIC_FY
MAPP CXC version: R6BC002
Language Package:HUTCH_1
CDA article: CDA102804/46
CDA version: R14A
Default article: cxc1250839
Default version: R6BC002
Network LOCKED
Operator: MULTIPLE
Elapsed:17 secs.
hope info i posted is enough to help you to help me and others
PS. I ALSO THINK A SEPARATE GUIDE FOR THIS PHONE'S SETUP NEED 2 BE POSTED AS IT IS NOT AS OTHER GUIDES SAY OR IF IT IS OTHER GUIDES NEED 2 GO INTO MORE DETAIL I WILL HELP IF IT IS NEEDED
yours madyotto
Could somebody please help me out with my w810. It seems like I have a damaged or corrupted GDFS whic I successfully backed up (but I guess it was corrupted already) nevertheless, I got a gdfs form the download section and was able to successfully apply it to my phone stating imei mismatch etc...
I then flashed my phone successfully til the end on SETool Lite v.1.11, but as I turn the phone on, all it shows is a white screen and it rarely turns on.
I'm not really too good with falshing pohnes but I guess I followed the right proceedure. First time I flashed it it worked fine however there were things missing from the settings screen (display icons etc. found on top of the selection for general, sounds, display etc.) and when I shut down the phone it does not give the usal SE and walkman splashscreen during shutdown.
So I thought, I ought to flash the CDA again but it came up with configuration error, tried another & the phone wouldn't turn on.
Next time I checked it gave me a prompt of cant read SRSC or something but was able to back up my phone's gdfs. Now after successfully flashing it, all it gives is the WSOD. Can I still revive my W810?
Help needed...please :-)
select your prefered language here : Top Sony Forums - Languages Description and post replyQuote:
Originally Posted by madyotto
post identify log from setoolQuote:
Originally Posted by bleurdeur
i had the same problem nd im still trying to fathom out what im doing (well reading the guides anyways) but instead of pressing c press 2 that will work :)
please tell me link for download link
live in uk so wich eva 1 is that is bestQuote:
Originally Posted by riders4sia
original was hutch1
=$
sorry for long reply was kinda goin give up on it
and
THANK YOU FOR RESPONSE
Hi Guys,
This is the story of my w810i.
I flashed my phone successfully and backed up my gdfs with the following over setool 2 lite:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXX CERT:RED
FLASH CID:49 COLOR:RED
Model:W810i
MAPP CXC article: R4CE012 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4CE012
Language Package:CENT_EUROPE
CDA article: CDA102555/2
CDA version: R2A
Default article: cxc1250324
Default version: R4CE012
Operator: 000-00
USERCODE:0000
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
Elapsed:8 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXXX CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4CE012_CXC1250316_GENERIC_HN
Restore from:R4CE012_CXC1250316_GENERIC_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:1641
Found:985 variables
Found:407 variables
Found:249 variables
GDFS read all done, GDFS_XXXXXXXXXX.BIN written
Phone detached
Elapsed:114 secs.
After which, I noticed that even though almost all functions worked fine, everytime I charge my phone through a wall charger, the IR port steadily lights red but through USB charging and car charging the light is off. I also noticed that a few of the frames in the "frame function" of the camera were distorted.
So I tried my luck with SEUS and my firmware was updated to R4EA031 and it gave me a configuration error right after.
So I flashed my CDA with setool lite once more and got it to work fine.
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXXXX CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (2048)
customize.xml (819)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
SETT_RINGTONE_HOOK_3.itm (10240)
Phone detached
Elapsed:127 secs.
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXXX CERT:RED
phoneid error 1
Error during phone id.
Elapsed:14 secs.
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXXX CERT:RED
FLASH CID:49 COLOR:RED
Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:CENT_EUROPE
CDA article: CDA102555/2
CDA version: R2A
Default article: cxc1250324
Default version: R4ED001
Operator: 000-00
USERCODE:0000
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
Elapsed:6 secs.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:XXXXXXXXXXX CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
CSloader version:
SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
loader startup: executed
loader GDFS startup: executed
stated number of vars:1633
Found:979 variables
Found:384 variables
Found:270 variables
GDFS read all done, GDFS_XXXXXXXXXXX.BIN written
Phone detached
Elapsed:134 secs.
Everything seems fine., however the red light is still there when I charge through a wall socket, "demo tour" just plays for 2-3 secs and says cannot play this video, had to change and reinstall "music mate" as the installed one just freezes and tones have changed when I switch off the phone. Java version changed to 6.5 but sadly the mega bass feature ain't that solid anymore...sounds through the headphones just turned soft from the previuos firmware.
Can I change the acoustics on it with setool lite as well? I've been reading through this this topic and it seems like I need to reflash my MAIN .mbn file to do it?
Kindly shed some light, I'm just starting to get the hang of modding & stuff. :a018:
Thanks!
may be you have a hardware problem, bro.
Quote:
Originally Posted by riders4sia
Is this pertaining to the red IR light that goes on when I charge through a wall socket?
How about the acoustic issue & any chance that I may get back the demo tour completely. It just give me a sense on completeness if I see all default menu files there.:a004
flash IC problem might be the main reason of dissapearing files. if you are a technician, apply hot air with good liquid flux on the Flash IC and try again
Ok thanks man...did it but still no luck, is there any chance that I get to change the acoustic settings of the phone via setool2 lite as well?
Hi i am trying to flash se w595 with se tool2 but i dont see my phone in the drop down menu, any help please, when i turn on phone it is locked and i dont remember the code will flashing work for this?
you may also try using different FSQuote:
Originally Posted by bleurdeur
Welcome to SEtool2 ( LITE edition ) v 1.11Quote:
Originally Posted by riders4sia
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102568/11
MODEL:HB1-06 Gen
VARIANT:EUROPE_2
LANGUAGE: EN
LANGUAGE: FR
LANGUAGE: DE
LANGUAGE: TR
LANGUAGE: ST
LANGUAGE: ZU
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401820425 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:48 secs.
which firmware i upload my cell phone thanx
You need this guide : Flash K800 CID53 with K810 software CID53 (for begginers)
Please specify phone model
What about W910i?? How can I unlock this?? and with program?? Please help me
Finndo
Can your friends and upload here the tutorial explains how and what is meant by files VKP, Patching, Simlock Remove it, thanks
hi! jasmin, u 've provided link, it will get struck at 65% during download, plz can u give another link for setool2lite 1.11.Quote:
Originally Posted by jasmin
welcome to setool2 lite,DB2010/DB2012 CID49 edition v 1.01
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3565*********** CERT:RED
FLASH CID:49 COLOR:RED
MAPP CXC article: R4CE012 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4CE012
Language Package:
CDA article: ذ
CDA version: ذ
Default article:ذ
Default version:ذ
Network LOCKED
Network subset LOCKED
Service provider LOCKED
Corporate LOCKED
Extended LOCKED
Operator: MULTIPLE
USERCODE:0000
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
Elapsed:10 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102555/6
VARIANT:M_EAST_N_AFR
LANGUAGE: EN
LANGUAGE: AR
LANGUAGE: FA
LANGUAGE: FR
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35************ CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok
DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4CE012_CXC1250316_GENERIC_HN
Restore from:R4CE012_CXC1250316_GENERIC_HN
Setting up GDFS...
format gdfs complete.
will write 67324752 variables
cut length from 3657433088(0A/0000)
FAIL: gdfs blk/unit:10/0000
Exception in GDFS write. maybe bad gdfs file.
Elapsed:57 secs.
Please help what is best MAIN FS misc files (Customer) to Download
When I run MY W810I
Show
Plese wait
and Remain that way
sure you have fully charged
battery. And again do fullflash.
First with FS and later MAIN.
I have this problem : K810i locked to Orange - i unlock it with setool2 1.1 but i after that i decide to debrand it by flashing with (R8BA024) old was (R6CA001_FS_ORANGE_GEN_RED52). After flashing phone was locked again to orange .I've try to unlock by patching but setool says that their is some different .... this message i receive from setool and two choises yes or no and after than phone dies .What should i do ?
hi,
can someone help me i have a sony ericsson model k810i. my IMEI:35799401182286650 and i have put a o2 sim card in but its saying inactive sim also tried vodafone and giffgaff still no joy. my phone is on o2 but still saying the same
must be locked on o2 how can i open it up on all networks,
i don't have a memory stick or or owt so is there any way i can do this.
PS am not very good with phones so must be easy to follow,
thank you in advance..
Post here log from your phone.You can see instructions in 1st post in this thread.