i saw somthing important
"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."
my phone is cid 51 how can i upgrade
Printable View
i saw somthing important
"i STRONGLY recommend use LATEST usbflash drivers (included in distributive) and use ONLY dcu60 for cid52 bypass."
my phone is cid 51 how can i upgrade
Upgrade to CID52:Quote:
Originally Posted by khli2001
Use Phone XS++ 3.1 (darvin)
Instructions:
1. Launch Phone XS++ 3.1 (Darvin)
2. Press Connect Button
3. HOld "C" button on the phone and connect the phone
4. If the phone is not CDI52 the Phone XS++ will ask you to upgrade it.
Would like XS++ to update your EROM CID to 52?
*Please note - This can be undone!* --> press Yes button.
5. Wait until the procedure finish.
WBR. Norberto_
Please Can Anyone Brief About What This SIM-Lock Patch Does - I Mean What This Patch Exactly Changes In Your Phone. By Its Name Looks Somewhat Related To Unlocking.
I don't know exactly the firmware and the GDFS of these phones, but the point is:
In the main FW is a routine what check the locks in gdfs. with the patch you can modify the simlock checking routine. After the patch the routine doesn't check the locks in gdfs.
If i'm wrong please tell me.
Quote:
Originally Posted by norberto_
after is done the phone still cid 51 nothing change
@mohdumer
This software create a patch to unlock SIM Lock. You know some people buy branded phone and the phone is locked to the BRAND SIM card like T-Mobile or Vodafone BRAND. This patch generator software will create a patch to open the SIM lock so can use with other SIM card.
Okay, so I've updated to SETOOL2LITE v1.11, I have also created the simlock patch. When I try to apply the patch I always end up with this error: Block @ $44600000 read error. Have only: 00000000 bytes
Can anyone help me?
P.S. - I'm using a k790a
Please post the LOG from the Phone XS++! So we can see if there is a problem.Quote:
Originally Posted by khli2001
i just update my phone with update serves
now is cid 52 but the fireware change is well
can any one make a R6BC002 hong kong 52 for me please
Hmm it seems that I have a big problem. Like I said before, everytime I try to apply patch setool gives me message "some patch values differs" and after that my phone (k550i) is dead. I tried with R8BA024, R6BC002, I even flashed my phone to w610i and then tried to patch it with w610i patch but it was the same. What is more, I tried to apply a quick access patch (on a clean firmware) and setool gave mi that fu:mad: message again... :( Is there something wrong with my phone or am I doing something wrong? I followed your instructions carefully... Please help.
Thank's for response to me.Quote:
Originally Posted by simox
I'm using the last version of you aplication (2.1), and the firmware file that I have, are not corrupted, I flashed my phone many times with them and didn't have any problem.
What would be the problem if I change the CID49 to CID52, Can I lost the personalitation option??
Greetings
i have update to cid 52 but it still not working
hope someone can help me
What kind of problems are you having?Quote:
Originally Posted by khli2001
Nevermind my problem, I decided to patch my phone using jdflasher and it finally works :D So at last I can thank you very much Simox for your program. :D
Th3z3D: It is my tool's bug. I haven't tested with DB2020 CID49 firmwares at all, because we cannot patch them for free. If you want to apply the unlock patch, you need to update the phone's CID to 52. Is there always a chance to loose your settings etc, but should not happen if you update the CID. You should always back-up your user data(contact list, pictures, ringtones, etc.) and then your GDFS.
khli2001: Please can you be more specific? My patch generatot isn't works, or you don't have the R6BC002 hong kong 52 firmware?
manjak: I'm glad that you have found a way to apply the patch. Enjoy the freedom :)
And guys, excuse me if I missed someone. There are so many questions...
sorry i was meaning the setool lite 1.11 not working on me
your tool just working fine
i got the patch is well
but i just cant apply the patch with setool 1.11
can i use setool 1.10 to apply the patch?
because i am working fine with 1.10
It's working ! Now my v630i is unlocked !
my firmware version is V630_R1JC002_MAIN_VODAFONE_MW_RED52
Great job simox !!!
You can apply the patch with v1.10 too, but 1.11 would be better... You can try jdflasher too.Quote:
Originally Posted by khli2001
Where can we download jdflasher?
Thanks
Can anyone advise:
if this will work with a K800i...I could not see K800 on SEtool2lite drop menu
If it is permanent or not (i think i know...)
Does this work with EXTENDED LOCK ?
Thanks
:o :o
Se-nse forum!Quote:
Originally Posted by rtmsz25
http://forums.se-nse.net/index.php?showtopic=17857
or here:
JUST_DAn_PO homepage
Thanks everyone! I just unlocked mine with jdflasher!!! THANK YOU SIMOX!!!
But K800 is on dropdown box. It isn't permanent. If you reflash your MAIN firmware, the phone will be locked again... You will not have any locks after you will apply the patch.Quote:
Originally Posted by joca
k550_R1JD001 cid52 need this patch pls
Tested and works.
Quote:
;W580 SW-R6BC002
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4E8118: 30B5041C00231A1C111C1C2095F4 F0B505213A229CF4F1FA0020F0BD
Tryed with a w580i as well, but couldnt start the phone after Flash
Used simox SIM_lock_remover patch generator v2.1 with this W580_R6BC002_MAIN_GENERIC_LA_RED52 to make patch. Flash went smooth but....
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: F:\_Upload\SIMLockPatchGen\vkp\Remove_SIM_lock_W58 0_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:377 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:*********** CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:10 secs.
something went Wrong...but what ??? can some help how to do it right
SEtool2 Lite v1.11, select "By Pass DB2020 Security," after clicke on "ADD" and select the Firmware, the same as vc used to generate the patch. Clicke on "Misc Files", select the patch vkp created by SIM Lock PatchGen and clicke in "Flash"
k550_R1JD001 cid52 need this patch simox .:) thx i got this message :
Entry point cannot be found. Probably it is not a MAIN firmware, but if you are sure
that it is, then please contact the author.
ahhh okay didnt ADD the MAIN firmware just the Patch.. ill try,,ill get in 10 min after flash..hang on ;)
;K550 SW-R1JD001Quote:
Originally Posted by xulos
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
4DBFB0: 30B5041C00231A1C111C1C20A4F4 F0B505213A22ABF407FA0020F0BD
i am not sure if this work with your or not
because this is from a hong kong fimeware
i dont know its that the same or diffenert with other language fimeware or not
Did the Falsh again on my w580i, this i could start the phone again, but its still Locked..damn
Color: Red ; OTP CID: 51
EROM CID: 52
Phone Model: W580i
Operator: EUROPE_4
CDA: CDA102426/12 R2A
Phone Firmware: R6BC002
Firmware CXC: R6BC002_prgCXC1123362_GENERIC_LA
Firmware supported for patch unlocking.
MCC+MNC: 238-01 - USIM
NCK: - Unlocked - 5
NSCK: - Locked - 5
SPCK: - Unlocked - 5
CCK: - Unlocked - 5
PCK: - Unlocked - 5
ESL: - Unlocked - 5
Phone Code: - Empty
Phone Code lock state: - Unlocked
Log from Setool..
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing F:\_Upload\_MOBIL\_Flash_Files\W580_R6BC002_MAIN_G ENERIC_LA_RED52\W580_R6BC002_MAIN_GENERIC_LA_RED52 .mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: F:\_Upload\SIMLockPatchGen\vkp\Remove_SIM_lock_W58 0_R6BC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:679 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:*********** CERT:RED
FLASH CID:52 COLOR:RED
Model:W580i
Brand:Generic
MAPP CXC article: R6BC002 prgCXC1123362_GENERIC_LA
MAPP CXC version: R6BC002
Language Package:EUROPE_4
CDA article: CDA102426/12
CDA version: R2A
Default article: cxc1123364
Default version: R6BC002
Network subset LOCKED
Operator: MULTIPLE
Elapsed:9 secs.
Damn... any suggestions
You found a bug. I will check it tomorrow, because it is too late here. I'm going to sleep :)Quote:
Originally Posted by xulos
Test Now some other sim-card.Quote:
Originally Posted by [golddickaz
Yes mannn, it Worked...hehe thx alot, and thx too simox, Very nice work m8, thx ;) keep up the good work
So, is it obbligatory to FLASH Main to th phon ? If I create teh patch from the same FW version the phone is running cant I just apply the patch ?
And can someone please tell me in few words how to upgrade CID 50 to CID52 without for examplel giving some credits to seking server?
And... after I upgrade CID, will the patching stuff work? with OTP CID50 andn EROM CID 52?
Simoxx, is there any way to read MAIN from the phone using setool lt and then Generate the patch from that created file ? is this possible ?
otherwise one has to download every possible firmware from the inteernet and this is not an easy task, after you have released this latest version, nobody wants to continue sharing their patches of teh firmwares they already have :((
Flashed my 3-locked w850i with firmware and fast-access script with SEtool 2.11 according to seunlock's guide, then wrote the simox-generated script to unlock it to it by "quick access." This rid it of the 3-screens and gained me access to all phone-functions except making calls. It displays "Inactive SIM" and won't let me pick my network. Any ideas?
SeTool output:
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\Administrator\Desktop\Remove_SIM_lock_W85 0_R1KG001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:14 secs.
Read Flash:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101272487 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Done
Phone is detached.
Elapsed:5 secs.
i m getting error while patching w200i with version r4a
check this sir and tell me where i m wrong?
any good patch for w200i
log from setool2lite 1.11
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901169312 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_FS_CENT_EUROPE_RED5 2\W200_R4JA011_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:2500
Will flash 125 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:242 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3542690xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: G:\kaku from 10 month\sony ericcson\SIMLockPatchGen_v2.1\SIMLockPatchGen\vkp\ Remove_SIM_lock_W200_R4JA011.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:12 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:2 secs.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35426901xxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\National Computers\Desktop\W200_R4JA011_MAIN_GENERIC_ME_RED 52\W200_R4JA011_MAIN_GENERIC_ME_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6360
Will flash 318 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\National Computers\Desktop\Unlock_Patch_DB2010_DB2012_DB202 0\W200_R4JA011_RED52.vkp
VKP script loaded OK. Lines: 5
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:176 secs.
setool2 lite only supports DB2012 CID49Quote:
Originally Posted by gurinder
I suggest you to read the following tutorial before you try to do anything How to apply patches with SETool2 Lite V1.11. And don't forget to backup your GDFS(it is very important to have a backup, otherwise you can brick your phone forever.)Quote:
Originally Posted by yurais
You can upgrade the CID with XS++ v3.x versions. When you connect the phone to XS++ it will ask you if you want to upgrade the CID or not. Yes, after your EROM CID will be 52 you can apply the patch...
Shitblast: The generated patch is good, I know for sure because that patch was tested on sen-se forum under v2.1 development. First reflash your MAIN firmware, then read this thread How to apply patches with SETool2 Lite V1.11, and follow the instruntions. Is should work. If not try jdflasher. Just read above a few posts and you will find the link for jdflasher...
xulos: I'm working on your problem...
i m using setool2lite v1.11Quote:
Originally Posted by seunlock
then i m getting this message,if this software supports only cid49 then why other people saying that it supports db2020 also. anyother solution plz..................