Printable View
is there an any-cid executorr.b for K610 R1JG001 RED53 i can only find R1KG001.....
and i guess theres some difference, so plz let me know if there is one available for my phone or if i can use the K firmware instead fo the J
The reason im flashing is that my sim-card was collected by my employer, and now i havent got a working sim for the phone as my private card is from another carrier.
So i would allso like to know if theres anyway to execute the quickaccess patch without a sim ?
Hi!
Some questions... i'm a little confused. For a cid53 phone...
After reboot the phone with the "executer" application, and applyed the REST file created from same main firmware already installed (same version into any_cid package), is necessary flash the main too? Same version? CID53 or CID52?
Or only the main or both?
Then i can apply the quick access patch and unlock-patch... Created from which main?
And last question: for update the firmware after unlocked, how to proceed?
last week, when i remove my sim card then my K800i dead adi...
then i use wotanclient to flash my k800i that can work...
all work nice....(include bluetooth)
only problem is language....
then i direct use SE Update Service to flash it....
the language is soft adi...(K800_R8BF003_WI_RED53)
but now my bluetooth can turn on (phone will lag for a while)but ppl cant find me also can seach device but nothing will appear then the bluetooth cant be turn off...
i try to use patching cid53 method it can work but i still facing the same problem...
bluetooth dun not work properly.......(K800_R8BF003_WI_RED53)
isnt the firmware problem...?
have anyone face same bluetooth problem....?
hope anyone can answer me what wrong with my k800i.....
thank alot...
hardware problem, need to service
where is the mkrest saved i cant find it anymore haha....iv searched everywhere on the computer i cant find it...i changed my windows and now when i make mkrest i cant find it nowhere....any idea???
inside c:\documents & settings\"username"
I'm going to try this later I hope, charging my phone right now because i was getting an error flashing it which turns out to be the safety line to block you from flashing it on low-ish battery
hi,
I would like to know if there are a risk in the execution of Executor.b in the phone ?
Thank you.
;)
only risk for patching CID53 phone
when i try and make my rest file for K770_R8BE001_MAIN_GENERIC_VI_RED53.mbn mkrest just says it can't read it, I have had no luck getting mkrest to read any MAIN :(
does it not do CID53 MAINs?
try this one out and post reply. the rest generator in jdflasher has some problem with mine too but this works for CID53 phone
Thank You!Quote:
Originally Posted by riders4sia
I will give this a try a little later when I can get back on the windows PC... rest of the family are hogging it lol.
Will update this post if I'm successful :)
EDIT:
I'm not sure if I'm doing something wrong but I think you do this one the same as mkrest, so I put my MAIN (renamed to 1.mbn) and the ssw2rest.exe into C:\ and run this in cmd
C:\ssw2rest.exe 1.mbn
all I get is a 'file io error'
I'm using XP Professional 32-bit so it should work :S
just drag and drop the mbn file over the ssw2rest.exe, the rest file will be created, don't rename the mbn file
i have a quick question: i uploaded the 3 files and then when i run the the executor file on my k800i it comes up with'Operation Failed' What do i do to fix this?!
i think you need to full flash your phone as there might be software issue with your current firmware or corrupt
and how do i full flash? sorry for asking its just that i'm new at this kind of thing
Quote:
Originally Posted by riders4sia
I have tried dragging the mbn file onto ssw2rest.exe as well, cmd pops up very quickly and closes straight away. I cannot find a generated rest anywhere on the computer.
I think it pops up very briefly in cmd before it exits 'file io error' probably not compatible with my firmware?
***Quote:
Originally Posted by riders4sia
its works:cool:
***Quote:
Originally Posted by ricksterm
dudE, try to find it on C:// ..,or in your defaullt cmd path, i.e C:\Documents and Settings\User>***
(after the pop up appears,the rest file goes to that path)in my case,,hehe;)
Thank you,
all is sorted now, it would also help if i extracted the .mbn from the rar file LOL.. got my QApatch, rest file, executor.b (other stuff is already on the phone... now to try aand patch the phone some... wan't to change network you see and I'm not paying!
edt: can anybody help me here, I just realised I lost the unlock .vkp for my K770i... K770_R8BE001_MAIN_GENERIC_VI_RED53.mbn
I had it all ready but must have accidently deleted it :-{
I know there is an unlock patch for this firmware and it isn't in the downloads section :'(
I don't want to have to change my firmware because I had trouble getting the K770_R8BA024_MAIN_GENERIC_VI_RED53 to flash. but I know this firmware has the most patches!
get the simlock vkp generator here : Remove SIM-lock patch generator - Top Sony Forums
Quote:
Originally Posted by riders4sia
I think that only goes up yo CID 52 and my phone is a 53 :(
well, if you look thoroughly, you could find it. here it is, it's better to upload here
Does any have anyCID for k810i R8BA024?
Thankyou, my w610i is now unlocked (db2020 with cid53), guide was a little confusing to follow, all worked fine once i replaced the qa2020 file in jdflasher with the one from anycid. flash seemed to take a lot longer than normal in bflash but it worked and now i can use my new sim in my old phone :D:)
k850 is an A2 platform based device you need to use the A2 Uploader V3 and the A2 CDA File Generator v1.03... :oQuote:
Originally Posted by SeaMonkey
why everytime when i run EXECUTOR it says "operation failed" and when i go on "bflash" an error massage comes up and my phone turns on for some reason help! plz btw i am using a k770i
I would to ask if I patch my phone (cid53) (using this methode I'll have access to bflash-isn't :cool:) then another time I flash it a full flash (Main+FS+Cust),
will have I access to bflash or I'll use this methode again :confused: ?
Thank for all, guys :)
I'll apply with my w200i RED CD53 :(
Help me please with K810 R8BA024 Orange firmware, there is no files in anycid archive for this firmware
Quote:
Originally Posted by SeaMonkey
but when i went back using ofs, the files werent there!
wat do i do?
I cannot get to stages below because I am getting Invalid Sim after doing the flash upgrade from K800i to K810i.
I successfully uploaded the related executorb files to give me the Bflash option but I cannot get to execute No.8
Please help!
8. Turn on phone and go to FileManager-Games- and run EXECUTOR.Now your phone will restart,but before he turns on - remove battery and put it back - don't turn on phone.
9. Start jdflasher - press Alt+F1 - and select just da flasher
I got this error message "Operation Failed" too.Quote:
Originally Posted by daflip
The file is R1KG001_CXC1250374_GENERIC_TH.zip,
but my firmware is R1KG001_CXC1250542, it this OK ? :(
need w850cid53 firmware please help me
So I'm brand new to this phone unlocking malarkey. Therefore I am falling at this first hurdle. I have downloaded all it said in the "you will need" section.:
1. With your MAIN make rest files with mkrest2 (you find him in /Far/Plugins/jdflasher/rest/mkrest2)
a) What is my MAIN?
b) Where is/Far/Plugins/jdflasher/rest/mkrest2?
I'm trying to reset the phone lock code, 4-8 digits, on my SE K800i, with CID53. Any replies, or anyone who wants to add me on msn and help would be greatly appreciated!
Your MAIN is one of the 3 files you will need to upload to your phone. One is MAIN, one is FS and they both must be added in the oflash section of FAR, and then the next is the Cust files which give your phone its regional settings, and you upload the entire folder containing these files, called tpa, into the ofs section of FAR. To get to the mkrest2 program, go into your FAR file, then the plugins file, then the jdflasher file, then the rest file and then drop your MAIN file on top of the mkrest2 icon thats there. That will spit out a new file into that folder, which is your rest file.
Im still learning too, buddy, and half the time, all people do here is send you a link to another thread which youve already read and didnt work. Im still not there yet but Im getting there.
Please help: my k770i cannot open due to i didnt remember the code i tried everything to open. i tried xs++ but it said that "phone is not supported" heres my phone log hope somebody can help with tihs... im totally dont have any idea or knowldge...
11:20:02| XS++ v3.2 Dev1 (Crystal) Ready !
11:20:02| Executed on Microsoft Windows XP
11:20:41|
11:20:41| Attempting to open the interface...
11:20:41|
11:20:41| TURN OFF PHONE!
11:20:41| Hold 'C' button on phone and connect phone NOW.
11:20:41| You have 30 seconds...
11:20:41|
11:21:09| Disconnected... Unplug the phone
11:21:29|
11:21:29| Attempting to open the interface...
11:21:29|
11:21:29| TURN OFF PHONE!
11:21:29| Hold 'C' button on phone and connect phone NOW.
11:21:29| You have 30 seconds...
11:21:29|
11:21:29| Baseband ID: 9900
11:21:29| Protocol Version: 3.1
11:21:29| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K770)
11:21:29| ...using GDFS name
11:21:29|
11:21:29| Profiling SEMC phone...
11:21:29| Platform: DB2020
11:21:29| OTP CID: 51
11:21:29| EROM CID: 53
11:21:29| EROM Color: Red
11:21:29| IMEI: 35362703xxxxxx
11:21:29| Phone ID: K770
11:21:29| Region: APAC
11:21:29| CDA: 1202-7695 R3A
11:21:29| Firmware Version: R8BC004
11:21:29| EROM: R3A022
11:21:29| Ready for operation!
11:21:42| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
11:21:42| Custpack: AMERICA_2 (CDA102460/101) (K510)
11:21:42| Generic(non-branded) custpack: Yes
11:21:42| Allowed languages: en, pb, xl,
11:21:42| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11:21:45| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
11:21:45| Custpack: EMEA_3 (CDA102286/10) (K700)
11:21:45| Generic(non-branded) custpack: Yes
11:21:45| Allowed languages: en, el, sq,
11:21:45| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11:22:36| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
11:22:36| Custpack: US_2 (CDA102286/22) (K700)
11:22:36| Generic(non-branded) custpack: Yes
11:22:36| Allowed languages: ae, pb, xl,
11:22:36| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11:22:41| Sorry, your phone is NOT SUPPORTED
11:22:41| Error: Customizing failed.
11:22:41| Error: Flashing failed
11:22:43| Disconnected... Unplug the phone
11:22:52| Executing SEMC Smartphone Operations!
11:22:52| Please hold boot key ('@' or 'C') and connect device...
11:22:59| Disconnected... Unplug the phone
You can't reveal or reset "user code" for a CID53 phone. You must use a BOX, or an online site(like Davinci).
Hello, I got flash my k550i to w610i, then i should chooose which CID?? CID for k550i or w610i?Quote:
Unpack .zip archiv for your firmware(or match firmware with one in anycid- but for your phone model).Here you have executor.b
Thanks.
CID for w610i, eg. if your K550i has CID50 then you need firmware for W610i CID50