please attach the vkp file here and post the complete log tooQuote:
Originally Posted by Dylanosi
Printable View
please attach the vkp file here and post the complete log tooQuote:
Originally Posted by Dylanosi
can some one help me with this its kind of confusing
2. In Windows Explorer drag (Windows drag and drop operation) the MAIN firmware (*.mbn) onto [SETool2 Lite v1.11 folder]\qamaker\qamaker.exe's icon. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
for simple understanding, copy the MAIN file to qamaker folder. now drag the main file over the qamaker.exe, a file will be generated, that is the quck access patchQuote:
Originally Posted by SG1000
Quote:
Originally Posted by simox
1000000000000000000% work for my W580i
thanks for you sharing ans support you
Hi all, I have a question about the following part of the tutorial:
I have successfully unlocked my phone thanx to this but I now have a question which I need answered to help a new member of this forum.Quote:
B. How to apply the generated patches to DB2020 CID52 phones:
...
I. We will apply the quick access patch to phone. It is needed to be able to use the quick access method in future. Due to this great patch you can easily apply the further patches, just like to DB2010 CID 49 phones.
!!!YOU NEED TO DO THIS ONLY ONCE!!!
With SETool2 Lite v1.11.
1. Select your phone model.
2. In Windows Explorer drag (Windows drag and drop operation) the MAIN firmware (*.mbn) onto [SETool2 Lite v1.11 folder]\qamaker\qamaker.exe's icon. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
3. Click on ... (three dots) button near MISC files box, and select the vkp file generated in step 2.
4. Tick Bypass DB2020 security check box.
5. Click on Add button and select the MAIN firmware file.
6. Press FLASH button.
7. Follow the instructions given by SETool2 Lite.
8. When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.
Note: After pressed the FLASH button, at one moment you will believe that nothing happens and the status windows is not changing! DO NOT remove the CABLE! Wait until "ELAPSED x SECONDS" appears in status window.
This process will take some time, about 10-15 minutes or a little more...
...
When I did it, for this step, I used the same MAIN version as the one which was originally on my phone.
What I want to know is, what would happen if you used some other MAIN? Would it actually replace the old main with this new one, and apply the QA patch at the same time?
So for instance if I had R1CF001 on my phone, and I used R1ED001 main for this step, would the new firmware on the phone be the R1ED001 with the QA patch installed. If so, the next step would be: apply the unlock patch, flash FS and CUSTOM to match the new MAIN?
Thank you and regards,
Narqval
HI
I'm new here. i have read this thread from start to finish and have done everything as explained. my problem is after i have done the tut on first page i got an config error. contact service provider. i then loaded custpack using xs++ but it still gives me the same error. e\
what should i do.
1. Your FS firmware must match the MAN firmware (R1GB001 for example)
2. Your cust pack must be matching the FS firmware (EU_5 for example)
If you mix up FS/cust pack you will probably get config error, check if you put the correct cust. pack in.
what is the FS you are using? provide it and we can give the correct custpack to solve your configuration errorQuote:
Originally Posted by villa1982
hi
the current firmware is R1JC002_VFE_LIVE2.
I used K800_R1JC002_MAIN_VODAFONE_WI_RED52 &
K800_R1JC002_FS_VFE_LIVE_2_RED52.
what should i do? should i reflash the main and fs then do the whole proceedure again?
hey guys
i did it. the reason why the config error appeared was because i took the enitre tpa file from custpack and loaded it via xs under tpa/preset/custom.
i extracted the contents from the custom folder of custpack and loaded it that way and it works perfect.
i guess being a newbie it is trial and error until you get it right.
all i can say is simox is a genius. if you need to unlock your phone just use the tools he recomends and it will work just fine.
that's good news from you, now you are a master of your own. he he....:)
Hello,
How can i unlock the sim card on the K310i Vodafone branded? I waht to use COSMOTE.
I red almost all the articles, and to all the things, .. but i can not be able to apply the patch, ...
the best tool to apply the patch is setool2lite v1.11.
i think.... yes..;)Quote:
Originally Posted by villa1982
thanks broo good advance
Thank you man. Its work perfectly!!! so easy,so perfect for my k610i,for no money. god blass you .gr.from croatia.
after doing everything you said my w580i is not unlocked although cant find quick access patch checkbox and this is what im getting when i run the script any help would be very much appreciated Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35651402830088 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\paul\My Documents\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W880_R8BE001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:14 secs.
use setool2lite v1.11 and apply qucik access first. your problem is with the quick access, you have not apply it yet. download setool v1.11 and you'll find "Bypass DB2020 Security", tick this and on the Add button, select the MAIN file and on the misc... select the quick access patch and click on the flash button, do whatever setool said. after the procedure is successfull, now select Use "quick access" patch and on the misc... select the vkp file (patch) you want to apply and click on the "Write Script"Quote:
Originally Posted by wookie1965
hello .. i recently unlocked my se v630 and i have a small problem.
my phone was DB20202 CID49 and i upgraded it to DB2020 CID52 so i could apply the sim unlock patch.
so i have the following problems:
-when i lock my phone and leave it for some time it won't unlock as fast as it did in the past.. it seems that i need to push the unlock key a few times (4-5 times) before it responds
-my display brightness is at the lowest level (like the times it's idle, before the display turns off or after you lock it ). when i change it from the display settings it works fine until the phone stay idle again
some help please?
Hi since the new version simlockpatchgen 2.2 now supports CID53 can I just follow the steps for CID52 to unlock my phone?
Pardon my ignorance if my question has already been posted on this thread: I currently don't have the time to read 138 pages of this thread.
My question: Can this guide be used for a sim-locked SE P990i from the Philippines.
I am now the proud owner of an unlocked V630 :D
Had it lying around for years, brand new in it's box. I'm on O2 and could not use the phone so I thought I'll give it a go and see what happens....
Thank you very much for an easy to follow guide!
Great, thank alot! I has done it
Hi.
I am trying to remove the sim-lock of my W580i (db2020 CID52), but when I run the setool V1.11, it shows that it doesn't find the setool2lib_lt.dll module. This file is in the same folder than setool2lt.exe file.
Could you help me with this?
Best regards,
CIB.
redownload and try again, probably a corrput file
Hi, i'm trying to unlock my s500i db2020 cid52, i've debrand it with xs++, made the sim-lock patch but when i hit "write script" on se tool, (with the phone turned off) it tells me to hold c and plug usb cable, then the phone goes to file transfer mode and the script doesn't run, just aborts after a few seconds. what am i doing wrong?
edit: if i uncheck the "use quick access patch" it runs the script, dialog box appears (remove/apply patch) but the phone remains unlock. This is what i get:
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501307715 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\SIMLockPatchGen\vkp\Remove_SIM_lock_S500_R8BE00 1.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Block @ $44600000 read error. Have only: 00000000 bytes
Elapsed:15 secs.
oops! never mind, forgot to apply the quick acess path first, my bad! the script runnned, my phone is unlocked now :D
Great tool! Thanks Simox.
hi can you help me to unlock c702 IMEI no is 357787022863709 working in talenor network norway
I am getting error when try to run qapatch:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:46 secs.
can anyone help me around this errors ?
try with a fully charge battery
SE w518a Issues:
Ok my friends, help me out a bit here.
I just upgraded my (beloved) w580i to the w518a (mostly as it has a better camera and I couldn't afford the Sony Cybershot, lol)
So here's the BIG problem - the blasted center button auto-connecting to MediaNet (which I NEVER use). I've yet to find very much info on the w518a. Feature and usage-wise, I'm fine with everything BUT this blasted Media Net. I contacted AT&T and they said it was an SE issue - contacted SE and (using an UNBRANDED version), they said the button to them straight to settings, so that it was *definitely* an AT&T branding issue. I'll be raising some hell with AT&T over this. My question is this: is there a way to change this without de-branding, or i that my only way to go, and if so, HOW do I go about unbranding it and locating the appropriate firmware?
I have checked with upper AT&T techs and they said that they are not aware of any way to change this, and did not know how to go about contacting the development (firmware) department. Going to attempt to contact upper echelon of AT&T Wireless regarding this issue as it *really* p**ses me off. If necessary, I will see if I can get them to give authorization to SE to provide me with an appropriate unbranded firmware. I'd rather not have to do this, but if they leave me no choice .... (and for those of you who think I can't get it done the "hard" way, lol, you don't know me).
I'll keep everyone posted on the progress, but if anyone knows of an easier way, I'd sure appreciate knowing about it
Unbranding is *not* my first choice - I remember the issues with unbranding the 580 - like turning IMs into data instead of text, etc. I'm also VERY irked at this 300k MP3 limitation. I went through a LOT today to get this phone, and I'm going to be even more ticked off if I find that the only thing this phone has over my 580 is the 3.2mpx camera vs the 2mpx. Not a happy camper at this point.
===========
I am waiting to hear from the developers at AT&T (yes, a message was sent to that dept).
In the meantime, I have seen that Ultimate Unlockers 4.01 indicates "Instant Full Unlock of DB3200 & DB3210 CID53 supported" and I have read that the w518a is a DB3200 CID53.
I have located several firmwares for the 518a -
W518a_1220-7732_R6A_ATT_USA
W518a_1220-7732_R7A_ATT_USA
W518a_1220-7732_R10A_ATT_USA
W518a_1220-7732_R12A_ATT_USA
W518a_1220-7732_R14A_ATT_USA
How can I tell which firmware is the appropriate one for my system?
Thanks!!!!
---Dragon77
What do i need to download?...what firmware do i need?Code:
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35777401313338 CERT:RED
FLASH CID:52 COLOR:RED
Model:W880i
Brand:Vodafone
MAPP CXC article: R1JC002 prgCXC1250641_VODAFONE_AI
MAPP CXC version: R1JC002
Language Package:VFE_LIVE_2
CDA article: CDA102719/122
CDA version: R3A
Default article: cxc1250651
Default version: R1JC002
Network LOCKED
Operator: 234-15
Elapsed:6 secs.
please tell us what is your problem first and we will help you
thank you thank you thanks a lot this tutorial has helped me unlocking my k800i
i am very happy
thanks a lot simox
Hmm..
Location : UK
Provider : T-Mobile (Was an Orange provided phone which was unlocked)
Reason for this action.. Phone suffered White Screen On Display issue.
Phone : K800i
Main firmware used : K800_R1CB001_MAIN_GENERIC_WI_RED52
FS Firmware used : K800_R1CB001_FS_EUROPE_2_RED52
Firstly.. Simox.. such a wonderful guide you have provided and the work you have put into it.. WELL DONE!!
Secondly, and it's sad..
Followed your guide to the letter... and had failure, phone temporarily bricked.
Here's the last (more or less) of the setool responses.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
LDR: DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Users\Anonymous\Desktop\Phone shit etc\SetTOOL Lite\qamaker\quick_access_K800_R1CB001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:482 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR: DB2020_PRELOADER_FOR_SETOOL2
No ack during phoneid
Phone info read error !
Elapsed:5 secs.
As with everyone, all I want is my phone working again
Need unlocked UK service with T-Mobile sim card.
Anything I am doing wrong?
Please ignore last message..
I changed MAIN and FS firmware, went through the guide once again
and it WORKED!!!!!! Unlocked working K800i again..
[bows before Simox]
Hi Simox, I am having a bit of trouble with the Remove_SIM_lock_W580_R8BE001_GENERIC.vkp. It never makes it to the apply yes or no option. This is log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BE001
Language Package:AMERICA_2
CDA article: CDA102568/107
CDA version: R8A
Default article: cxc1123364
Default version: R8BE001
Network LOCKED
Operator: MULTIPLE
Elapsed:5 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\W580_R8BE001_MAIN_GE NERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: D:\Downloaded Programs\Sony Ericsson\W580i\R8BE001_RED_52\quick_access_W580_Ma in_ Generic_LA_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:949 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxx CERT:RED
Loader not responding !
Elapsed:42 secs
I am re-flashing everything and I hope it will work this time. Any help would be appreciated.
Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock Tick Tock
Well i tried it again and it did the same thing. Its not unlocked and same problem. What am I doing wrong? Anyone??
Guys, need help with Far manager (JDFlasher), when i try to open oflash to flash my W660 (it has R8BB001 flash atm) with R8BE001 so i can unlock it, JDFlasher gives me this error...
http://img190.imageshack.us/img190/9750/farerror.th.jpg
Can someone help me? :eek::eek:
JDFlasher can read the mobile, but it can't open the oflash dir so i can flash it with main R8BE001.
I tried reflashing the mobile with SE program but with no luck, after it reflashed, JDFlasher still keep giving the same result... :(:eek::(
Ok I fixed it myself. Used Far Manager+JD Flasher. F11 then connect using JD Flasher. Double click BFLASH and follow instructions. Asked me to remove battery 4 times and reconnect. After that it says to flash main first. I did. Then Flashed VKP file. Then hit .. until you get this: Warning Are you sure, Click Yes. Restarted phone and its was unlocked. I dont know why Setool2lite would not work but FAR did it after trial and error.
:p:rolleyes:
I have w850i .. and unlockeeeeeeed :))
thank youuuuu so muchhhhh :)
the last step (B. How to apply the generated patches to DB2020 CID52 phones) doesnt worked for me.. just with farmanager and jdflash :)
(sorry for my english..im hungarian)