Printable View
Well, when I put SIM card from another network (T-mobile) it works, but with mine it says to put right card, so I don't think phone is flashed wrong.
And yes, I have k530 mobile with w660 software, and it is db2020 (52)
And another thing; is it normal that the file I get from SIMLockPatchGen is only 1KB?
Oh, and 1 more thing: I already flashed my k530 to w660. When applaying quick acess patch, which MAIN do I choose, and which mobile tipe? k530 or w660
you should choose W660 as your phone model, remember to tick the bypass db2020 security box
Yes, you are right. The reason this tool support CID 50/51/52 is that there are a few cross flashed phones for e.g. K310@W200 (DB2010 CID49) with CID52 firmware in it.
Salam;
My W810i is a :
PF(DB2010);OPT CID:50;EROM CID:50 ;FirmWare v:R4ED001,
It dosn't accept the patch for the SIM-unlock
show us the log from setool
thanks man you really saved my life
hi mi phone k800i :r8bf003prgcxc120210_generic_wi r8bf003
customization:cda 102511?4 r11acxc1250490 r8bf003 europe_2
can i unlocked mi phone by SIMLockPatchGen2.2
yes sure, download setool and show us the log from setool and post hereQuote:
Originally Posted by quankid
Hello..
I followed your tutorial to unlock a S500i mobile phone..
But I still get the "Configuration error. Please contact your network operator or service centre"
the log..
Code:Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35912202330722 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\JimKarvo\Τα έγγραφά μου\FF_Downloads\SIMLockPatchGen\vkp\Remove_SIM_lock_S500_R8BE001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
block already patched, skipping.
VKP script executed OK
Elapsed:17 secs.
flash a custom pack to it will solve it 100%
Could you help me more?
I have downloaded Top Sony Forums , but as I can see, I can't flash it with XS++
What I have to do?
show us the log, post the log you got from xs and we could give you a guide
Hello. I used the FAR manager to add the custom file to phone, and it is works! Thank you :)
Hi I have a major problem and despite struggling with my phone for the last 1 day, uing FarManager, SeTool2, SeTool2Lite and XS++ i am still not able to resolve my issue !!
1 I had a sony ericsson phone (W580i ) from Rogers Telecom (bought in Dec 2007), which i had unlocked in Feb 2008.
2. It was unlocked perfectly and was working fine until i decided to automatically upgrade it. I used SEUS ( the automatic update service ) to update my phone. After the update, I used the phone on Rogers network, and later kept it aside since I had gotten another phone.
3. Now almost after 1 year I took out the W580 phone again, bought a Fido SIM and tried using it, only to realize that it will not accept any non-Rogers SIM.
4. I researched on forums and tried checking my firmware to realize that W580 security had been automatically upgraded to CD53 and the phone was relocked to Rogers ( perhaps during the SEUS update).
5. I have used FarManager to Flash W580 with a new CD53 Firmware and FS, but the phone is still locked.
6. I also generated a phone unlocking TKP patch using SIMLockPatchGen_v2.2.rar ( for the new CD53 firmware / MBN ) but i am unable to apply it using setool2lite ....
Please help me with this, as I am really confused and need to fix this ASAP !!
find below the logs ...
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
MAPP CXC article: R8BA024 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BA024
Language Package:T_MOB_INT_B
CDA article: CDA102774/165
CDA version: R2A
Default article: cxc1123364
Default version: R8BA024
Network LOCKED
Operator: 302-72
Elapsed:28 secs.
Will backup GDFS now.
<< I cancelled the operation since it doesn't work beyon this point >>>
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.
Basically, after identifying the phone succesfully setool2lite is not able to do any other
operation, neither can it read GDFS properly, nor can it write the TKP script !!!
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "READ GDFS" and insert cable while pressing in C key )
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:6 secs.
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "WRITE SCRIPT" and insert cable while pressing in C key )
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:53
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35928501525966 CERT:RED
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:0 secs.
( after IDENTIFYING the phone, I disconnect the phone, plug the battery again, press "READ GDFS" and insert cable while pressing in C key )
Also, i wanted to to know if above steps are the right way to use setool2
As far as FarMNanager is concerned, once the phone it identified i donot have to dicsonnect everytime after flashing firmwares or uploading XML files ???
So does, setool2 reauire me to connect the phone everytime again for each new operation ?
Also would it be possible to generate the unlock code based on the IMEI number ??( perhaps decoding the tkp patch info may help)
thanks for the help
Hasan
you need to do all operations with FAR+Jdflasher, none of the software work on CID53 phone
Read here : Flash K800 CID53 with K810 software CID53 (for begginers) - Top Sony Forums but use files only for w580
here for unlocking procedure : Patching CID53 (DB2020)DB2010,2012 - Top Sony Forums
Please help...I'm trying to unlock a w850i locked to Orange UK, but even when I follow instructions, the .bin file I have created, when I put it in qamaker.exe. it says "not a BABE".....also sim lock generator says "is not valid firmware"
Here is log
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35536301592425 CERT:RED
FLASH CID:52 COLOR:RED
Model:W850i
Brand:Orange
MAPP CXC article: R1JC002 prgCXC1250202_ORANGE_CY
MAPP CXC version: R1JC002
Language Package:ORANGE_GEN
CDA article: CDA102677/36
CDA version: R11A
Default article: cxc1250489
Default version: R1JC002
Network LOCKED
Operator: 234-33
Elapsed:11 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35536301592425 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1414
Found:663 variables
Found:676 variables
Found:75 variables
GDFS read all done, GDFS_35536301592425.BIN written
Phone detached
Elapsed:54 secs.
What can I do?
Look...It worked after all...just need someone to give me the .vpd file to turn the briwser from orange to o2.....thanks
Hi folks,
I use Setool Lite 1.11 to unlock S500i which is locked to multiple operator when I identify phone. I follow the the instructions carefully and the process was finished successfully. But the phone is still locked. Could it be the reason because my phone is locked to multiple operator.??
Please help me. I have include the log, thanks in advance.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
Model:S500i
MAPP CXC article: R8BE001 prgCXC1123326_GENERIC_LY
MAPP CXC version: R8BE001
Language Package:EUROPE_5
CDA article: CDA102765/129
CDA version: R3A
Default article: cxc1123328
Default version: R8BH001
Network LOCKED
Operator: MULTIPLE
Elapsed:7 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
HOLD "C" BUTTON AND ATTACH PHONE
CID52 BYPASS PROCEDURE FINISHED
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\SElite2\qamaker\S500_R8BE001_MAIN_GENERIC_LY_RE D52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: D:\SElite2\qamaker\quick_access_S500_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:892 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: D:\SElite2\SIMLockPatchGen\vkp\Remove_SIM_lock_S50 0_R8BE001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:27 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
:confused:The identify log after patch unlocking is pratically the same:(
Model:S500i
MAPP CXC article: R8BE001 prgCXC1123326_GENERIC_LY
MAPP CXC version: R8BE001
Language Package:EUROPE_5
CDA article: CDA102765/129
CDA version: R3A
Default article: cxc1123328
Default version: R8BH001
Network LOCKED
Operator: MULTIPLE
Elapsed:19 secs.
it will be as the patch only fools the phone in to thinking its unlocked :-)
did u add the main and patch then tick the bypass box then press flash
I guess I did, as you can read in the log.
I will try to unlock it again and post the results.
OK, when trying to follow the steps to unlock a k550i (locked to a portuguese network) I got carried away and did something I wasn't supposed to (it wasn't even part of the steps... doh!)... now the phone doesn't seem to work and I can't even find the gdfs file that I'm supposed to use to fix the thing...
why?? I definitely did the "read GDFS"... I thought it would save that gdfs_IMEI file automatically...
what can I do? I'm like a 8 year old to this stuff so please explain it to me with that in mind.
Thanks! Unlocked K770i CID53 R8BE001 :D
good job, now can someone help me out here :)
trying to patch K610im_R1EJ001 (Top Sony Forums) or similar in the catageory byt the patch keeps coming up with
' BABE header integrity check failed! "C:\Contenido Sony\Programas\SEtool lite 1.11\SIMLockPatchGen\K610_R1GB001_MAIN_GENERIC_TH_ RED49.mbn" firmware is probably corrupted!
FINISHED.'
any thoughts what am i missing here!! tried it with a handful of firmware for 610 but giving me the same headache. can som1 create the patch for me plz.. ..
cheers!
ok appologies the new version solves the problem but hit another wall.....
the stupid fone won't apply it now
'Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
'
it starts the fone and it goes to file transfer screen but setool wont respond and then just gives up. ???
any help appreciated.
fully reflash it with cid 52 firmwere and upgrade the cid to 52 with xs then retry to unlock
so i cant patch 49 :(.... thanks maite for your help.
hmmmm xs+ never used it before. just gimme a quick hint i just get a firmware mbn and flash the fone with xs..... what do i do after that?
download xs use it to upgrade ur cid to 52 start it up press conncet it it will ask if u want to uprade to cid 52 press yes the u can dwn load the main and fs from the download area on hear add the main to the main box and fs to the fs box chose a gernic main and fs or eruope 2 one from the download area on xs there will be a 3rd box custom files pick europ 2 from the list then when u have all the files in the boxes just press flash if u want to use se tool add the main and fs to the big box and a custom pack with u can download hear add that in rar forum then press flash hope this helps
Help please - could not find security check box as decribed - am useing setool 1.11 - getting this error -
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:356 secs.
Is this due to check box and if so where is it?
you need to apply quick access first,Quote:
Originally Posted by never_sane
Read here : Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums
Same problem again when applying patch - what am i missing?
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401030068 CERT:RED
FLASH CID:52 COLOR:RED
Model:K810i
Brand:Tele2
MAPP CXC article: R8BA024 prgCXC1250811_GENERIC_SM
MAPP CXC version: R8BA024
Language Package:EUROPE_1
CDA article: CDA102511/101
CDA version: R1A
Default article: cxc1250813
Default version: R8BA024
Extended LOCKED
Operator: MULTIPLE
Elapsed:22 secs.
Elapsed:22 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401030068 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing C:\sonyuse\K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\sonyuse\K810_R8BA024_FS_EUROPE_1_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4260
Will flash 213 blocks...
SSW loading returns:0
Going to execute VKP script....
Enable alternative security bypass !!!
Starting to process VKP patch script: C:\sonyuse\quick_access_K810_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Block @ $44140000 read error. Have only: 00000000 bytes
Elapsed:474 secs.
trying to apply q acc patch and get the above error - still can't find security check box mentioned in the tutorial - please help
i am sure you did not select the phone model as K810i, when you select the phone model, it should be like this and add the main only with the quick access patch on the misc... and click flash
this could be ur problem k810i are db 2020 not Flash ID check:2019 :-(((
Ok, hello everyone, I'm fairly new to flashing but I have done lot of reading. Reading that has led me to unlock a W810i. Now I'm having a problem unlocking a K800i from the Orange network. My progress is nearly complete. I have followed the Tutorials and have gone straight to the actual Patching with Simox's Sim-Unlock Patch but the thing is, everytime I click 'Write SCRIPT' it says 'Trying to launch embedded bootloader' and stops. Funny enough, the phone itself then comes straight out of flash mode then enters into file transfer mode, almost immediately. I have done the tutorial over and over and over again but always end up stuck at that step. Yes, I have applied the QA patch though sometimes I wonder if I did it correctly as during the patching it says "Some values differ, continue?" and I click YES. So, can anyone tell me what I am doing incorrectly? Your help will be greatly appreciated.
PS. Phone Info:
Model: K800i
FW: R8BF003_MAIN_GENERIC_WI
CID: 52
the phone shpuld be off at all times if u are useing se tool light and did u make the patch from the same main file
Yes, I know the phone should be off at all times, and yes, I did apply the patch with the same MAIN file.
Oh, no worries. I fixed the problem myself. It is now unlocked.
hi m8. the same thing happens to me: when i attach rhe usb cord (while pressing 'c') the Phone gets into file transfer instead of staying off. :mad:Quote:
Originally Posted by anima_scot
what was is that u did that solved that?
probly take the battry out and leve it for a min
tried it for an hour + byt a few more min. won't hurt ne1 i guess....;)
doesnt solve....
got some other idea?
is se tool still running ?
Hello...
So, here is my problem. I'm trying to unlock k510i, but after patching, phone won't turn on any more. Only solution for that is to flash it again, which I did, several times (yes, I tried applying patch, 4 to 5 times). While flashing, phone is off all the time, battery in and out as needed, patch is from the same main file, in program I selected k510...
CID is 49 and firmware R4EA031.
Any suggestions?
well, it seems it always takes about 5 min's more than u expect....:p
it's that murphy dude who handles these sort of things....:D
ty ne-way ...