I need programm for update k770
Printable View
I need programm for update k770
You mean flash it or update it through SEUS. If you want flash it , look here:Quote:
Originally Posted by mydorsa
Flash your phone and How to apply or remove patch using SETool 2 Lite
or
XS++ 3.1 Guide-Flashing,Customizing,Recovering
But if you want to upgrade via SEUS, then you can download program from official sony ericsson page. But you should know this , SEUS will update your cid from 52 to 53 and you can only then flash your phone with JDFlasher or KulanKendi and you can`t do anything else.
Nice day
does it work for w850i ?
What do you mean? If you can flash your phone with this program?Quote:
Originally Posted by kkx1223
The answer is : Yes.
Nice day
question . . . is the program applicable for k310i?
@stigmata
Yes :D
Have a nice day ;)
i've read somewhere that seTool lite is difficult to use than jdflasher?
i'm downloading caz the jdflasher tutorial that i read seems a bit confusing. is it safe to use this seTool2 Lite with my new k790.
i've been flashing and modding my old k750 so i'm not new to this patching stuff, just asking.
thanks for the great thread by the way.
Look I flashed my k800i with setool lite and there were no problems.
Flash your phone and How to apply or remove patch using SETool 2 Lite
Nice day
Please Don't used Capital letters,Quote:
Originally Posted by mh-mido
I think you can Flash your P990. It's more easy with XS++, but you can't install directly from your P990:)
Need help about unlocking K618i, procedure, files etc...
For start it will be nice when you post XS++ log for your k618Quote:
Originally Posted by borce_razo
when i tried quick access patch using using setool2lt i dont get that "MAIN file (.mbn)" in the qamaker directory. can any one tell me how i can solve this problem why it is happening:(
you need to download the MAIN file (.mbn) for your phone from the download section.
thx very very much in rapidshare it was told me that was a virus but now i can download it
where can i get W850_R1ED001_MAIN_GENERIC_CY_RED52 firmware from for free?
plz i realy need to flash :D
Thnaks, it's very helpful. I will try to get my phone to be unlcoked. LOL
Can anyone tell me where i get the quick access patch?
Does the program support w800i (flashed from k750i)?
Can i add languages with it?
Sorry about all the question but i'm new here, and has only tried flashing, and so on, for three days.
you don't need quick access because the w800 is CID36/49 and this does't need the quick access to apply any patchQuote:
Originally Posted by McMaiden
use FarManager to write the patch, or GFlash
Setool2lite only has support for CID49 or more, not CID36
Hi. I want password protection patch for K810 R6BC002
I think that patch don't exist for that firmware for now( I didn't find him anywhere)Quote:
Originally Posted by reza1reza1
Dear folks!
I got a little problem when i wanted to "read GDFS" with SETool2lt
The prog is able to identify my phone but when i want to "read GDFS"
my screen Shows:
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
And when i want to install the "Remove_SIM_lock_K750_R1CA021.vkp"
the program says:
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.
What can be wrong?
Pleas help me!
roy
your phone is brown and i think setool v1.11 not support itQuote:
Dear folks!
I got a little problem when i wanted to "read GDFS" with SETool2lt
The prog is able to identify my phone but when i want to "read GDFS"
my screen Shows:
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
And when i want to install the "Remove_SIM_lock_K750_R1CA021.vkp"
the program says:
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
skipping empty loader...
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.
What can be wrong?
Pleas help me!
roy
use ++xs v3.2Quote:
ouch i have same problem with w580i
Read this very carefully Patching BROWN cid49 K750 - Top Sony Forums
Excuse me!
How can I combine many patches into one *.vkp file?
May I copy the content of files and paste into one file, then save as *.vkp?
Thanks much!
i have AT&T mobile(w580i)
in phone read/write user data are not allowed.
is there any solution for that?
plz help me out.
is this program better than xs++?
Yes, you can patch with it.
Have a nice day
I can't use on vista...
It works with Vista. What are the symptoms in your case? Error messages please.Quote:
Originally Posted by markolino
i can change/update to v1.11
Yes you can and here you will find both - Setool2lite 1.10 and update to 1.11Quote:
Originally Posted by undertaker
Flash your phone using SETool 2 Lite - Top Sony Forums
every time i dowload this avg warns me i got a virus does this happen with every one or just me
It's normal behavior,but check by yourself here setool2lite v1.11 Trojan horse - Top Sony ForumsQuote:
Originally Posted by ihate118
This is just a false positive: setool2lite v1.11 Trojan horseQuote:
Originally Posted by ihate118
Edit: oops! I should press 'refresh' more frequently...
I keep getting a virus alert from Avast whenever i try to install the setools 2 v1.11 update from the link you posted. Do you have another link to the update or a download for the 1.11 software?
Don`t worry , just disable antivirus and install update.
It`s not a virus.
Have a nice day
When it will support CID53 EROM?I hope it strongly!
THANK YOU VERY MUCH Ts014
what about for a v630 ? :D