Anyone has a schematics for the service cable? YEs, I do have one but it doesnt success.
Just pulled the connector to a broken phone and soldered 5 cables on the bottom as follows
8,12 Shorted to +5V (pulled from USB, also tried a spare full charged battery)
9 Ground , both USB for the 5V and the serial cble ground.
10,11 TX,RX
the TX, RX and ground, I took it from a siemens DCA 510 USB to serial cable, from pins 2,3,4. this works for me with man phones, like motorol C115,W220, etc, Panasonic x60, Alcatel...
Results,
doesnt works
I connect all of tis stuff to the phone and press identify or whatever function on any SE software incuding latest setool2, xs. got cracked, etc, nobody detects the phone
emp protocol 300 and couldnt find chip ID loader and ton of errors
So, thats why I ask, somebodu has a working in house made service cable and correct the mine ?
I use an old AMD Athlon XP computer without phisical Serial port :(